Up to now, the notched strength of a composite laminate containing an inclined elliptical hole at its center has not yet been predicted by researchers due to the absence of an appropriate failure criterion and an analytical solution. In this study, this problem is tackled by using a finite-element-based procedure, developed previously by the authors, together with a modified point stress criterion. The predicted notched strengths of composite plates containing a central inclined elliptical hole agreed well with experimental results.
Similar content being viewed by others
References
J. Awerbuch, and M. S. Madhukar, “Notched strength of composite laminates: predictions and experiments. A review,” Journal of Reinforced Plastics and Composites, 4, No. 1, 3−159 (1985).
J. M. Whitney and R. J. Nuismer, “Stress fracture criteria for laminated composites containing stress concentrations,” J. Compos. Mater., 8, No. 3, 253-265 (1974).
R. B. Pipes, R. C. Wetherhold, and J. W. Gillespie, “Notched strength of composite materials,” J. Compos. Mater., 13, No. 2, 148-160 (1979).
S. C. Tan, “Finite-width correction factors for anisotropic plate containing a central opening,” J. Compos. Mater., 22, No. 11, 1080-1097 (1988).
J. K. Kim, D. S. Kim, and N. Takeda, “Notched strength and fracture criterion in fabric composite plates containing a circular hole,” J. Compos. Mater., 29, No. 7, 982–998 (1995).
C. L. Hwan, K. H. Tsai, W. L. Chen, et al., “Strength prediction of braided composite plates with a center hole,” J. Compos. Mater., 45, No. 19, 1991-2002 (2011).
P. P. Camanho, G. H. Erçin, G. Catalanotti, et al., “A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates,” Composites Part A: Applied Science and Manufacturing, 43, No. 8, 1219-1225 (2012).
S. R. L. Tinô, R. S. Fontes, and E. M. F. de Aquino, “Theories of failure average stress criterion and point stress criterion in notched fiber-reinforced plastic,” J. Compos. Mater., 48, No. 21, 2669-2676 (2014).
B. Vieille, M. Chabchoub, D. Bouscarrat, et al., “Prediction of the notched strength of woven-ply polyphenylene sulfide thermoplastic composites at a constant high temperature by a physically-based model,” Compos. Struct., 153, 529-537 (2016).
E. Özaslan, B. Acar, and M. A. Güler, “Experimental and numerical investigation of stress concentration and strength prediction of carbon/epoxy composites,” Procedia Structural Integrity, 13, 535-541(2018).
E. Özaslan and A. Yetgin, “Stress concentration and strength prediction of 2×2 twill weave fabric composite with a circular hole,” J. Compos. Mater., 53, No. 4, 263-274 (2019).
E. Özaslan, M. A. Güler, A. Yetgin, and B. Acar, “Stress analysis and strength prediction of composite laminates with two interacting holes,” Compos. Struct., 221, 110869 (2019).
S. C. Tan, “Laminated composites containing an elliptical opening. I. approximate stress analysis and fracture models,” J. Compos. Mater., 21, No. 10, 925-948 (1987).
S. C. Tan, “Laminated composites containing an elliptical opening. II. Experiment and model modification,” J. Compos. Mater., 21, No. 10, 949-968 (1987).
S. C. Tan, “Fracture strength of composite laminates with an elliptical opening,” Compos. Sci. Technol., 29, No. 2, 133-152 (1987).
C. C. Lin and C. C. Ko, “Stress and strength analysis of finite composite laminates with elliptical holes,” J. Compos. Mater., 22, No. 4, 373-385 (1988).
X. Xu, L. Sun, and X. Fan, “Stress concentration of finite composite laminates with elliptical hole,” Computers & Structures, 57, No. 1, 29-34 (1995).
V. K. Srivastava, “Notched strength prediction of laminated composite under tensile loading,” Materials Science and Engineering: A, 328, Nos. 1-2, 302–309 (2002).
D. R. Ambur and D. M. McGowan, “Response of composite plates with inclined elliptical notches and subject to axial compression,” AIAA/ASME/ASCE/AHS/ASC 40th Structures, Structural Dynamics, and Materials Conference, St. Louis, MO, April 12-15, 1999. (AIAA Paper No. 99-1276)
K. H. Tsai, C. L. Hwan, M. J. Lin, et al., “Finite element based point stress criterion for predicting the notched strengths of composite plates,” J. Mechanics, 28, No. 3, 391-396 (2012).
C. L. Hwan, K. H. Tsai, C. H. Chiu, et al., “Strength prediction of braided composite plates with lateral holes by a finite element based point stress criterion,” J. Compos. Mater., 47, No. 9, 1161–1168 (2013).
Q. Zhuang, “A Study on the strength of composite laminates each with an elliptical hole,” Master Thesis, Department of Mechanical and Computer Aided Engineering, Feng-Chia University, Taichung, Taiwan (2016).
K. H. Tsai, C. L. Hwan, W. L. Chen, et al., “A parallelogram spring model for predicting the effective elastic properties of 2D braided composites,” Compos. Struct., 83, No. 3, 273-283 (2008).
I. M. Daniel and O. Ishai, Engineering Mechanics of Composite Materials, 2nd Edition, Oxford University Press, New York, USA, pp. 374-375 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 56, No. 5, pp. 905-918, September-October, 2020.
Rights and permissions
About this article
Cite this article
Lin, M.J., Tsai, K.H. & Hwan, C.L. Strength Prediction for Composite Plates with an Inclined Elliptical Hole. Mech Compos Mater 56, 619–628 (2020). https://doi.org/10.1007/s11029-020-09908-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-020-09908-z