Abstract
The effect of adding 5 and 10% of TiB2 on the corrosion of Udimet 700 (U700) in 1 M HCl including altered concentrations of organic compounds was considered at 25°C by electrochemical methods: potentiodynamic polarization (PP), electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) methods. Microstructure characterization of these alloys was studied by X-ray diffractometer. Tafel plots confirmed that the appearance of examined components had a slight effect on the polarization curves. The Nyquist plots demonstrated that the charge transfer resistance (Rct) increase for the examined compounds was much higher with compound II compared to compound I. Bode plot revealed that, the total impedance raised with increasing inhibitor concentration and the constant increment in the phase angle shift was clearly related to increasing of the inhibitor concentration adsorbed on alloy species. EFM results showed an agreement with PP and EIS.
Similar content being viewed by others
REFERENCES
Friend, W.Z., Corrosion of Nickel and Nickel-Base Alloy, New York: Wiley, 1980.
Zielińska, M., Yavorska, M., Poręba, M., and Sieniawski, J., Arch. Mater. Sci. Eng., 2010, vol. 44, no. 1, p. 35.
Kim, H., Mitton, D.B., and Latanision, R.M., Corros. Sci., 2010, vol. 52, p. 801.
Davis, J.R., Ed., Materials Park, OH: ASM Int., 2000.
Alloy Handbook, and Bulletins, Huntington Alloys, Inc.
Gao, Q., Wu, S., Lü, S., Duan, X., and Zhong, Z., J. Alloys Compd., 2015, vol. 651, p. 521.
Tee, K., Lu, L., and Lai, M.O., J. Mater. Process. Technol., 1999, vol. 89, p. 513.
Cirakoglu, M., Watt, G.L., and Bhaduri, S.B., Mater. Sci. Eng., A, 2000, vol. 282, p. 223. https://doi.org/10.1016/s0921-5093(99)00721-2
Fang, J.J., Li, Z.X., and Shi, Y.W., Appl. Surf. Sci., 2008, vol. 254, p. 3849. https://doi.org/10.1016/j.apsusc.2007.12.034
Van Meter, M.L., Kampe, S.L., and Christodoulou, L., Scr. Mater., 1996, vol. 34, p. 1251. https://doi.org/10.1016/1359-6462(95)00671-0
Peters, J.S., Cook, B.A., Harringa, J.L., and Russell, A.M., Wear, 2009, vol. 267, p. 136. https://doi.org/10.1016/j.wear.2009.01.037
Kartal, G., Timur, S., Urgen, M., and Erdemir, A., Surf. Coat. Technol., 2010, vol. 204, p. 3935. https://doi.org/10.1016/j.surfcoat.2010.05.021
Wiedemann, R., Oettel, H., and Jerenz, M., Surf. Coat. Technol., 1997, vol. 97, p. 313. https://doi.org/10.1016/s0257-8972(97)00204-1
Makyta, M., Matiašovsky, K., Taranenko, V.I., Electrochim. Acta, 1989, vol. 34, p. 861. https://doi.org/10.1016/0013-4686(89)87120-8
Taranenko, V.I., Zarutskii, I.V., Shapoval, V.I., Makyta, M., and Matiašovsky, K., Electrochim. Acta, 1992, vol. 37, p. 263. https://doi.org/10.1016/0013-4686(92)85011-9
Wendt, H., Reuhl, K., and Schwarz, V., Electrochim. Acta, 1992, vol. 37, p. 237. https://doi.org/10.1016/0013-4686(92)85009-a
Xuguo Huaia, Shihai Zhaoa, and Wandeng Li, J. Ceram. Process. Res., 2009, vol. 10, no. 5, p. 618.
Nable, J., Gulbinska, M., Suib, S.L., and Galasso, F., Surf. Coat. Technol., 2003, vol. 173, p. 74.
Ruppi, S., Int. J. Refract. Met. Hard Mater., 2005, vol. 23, p. 306.
Chang, L.M., An, M.Z., and Shi, S.Y., Mater. Mech. Eng., 2005, vol. 29, p. 39.
Wang, Y., Lim, S., Luo, J.L., and Xu, Z.H., Wear, 2006, vol. 260, p. 976.
Ibrahim Hamada Mohamed, Makhseed Saad, Abdel-Motaleb Ramadan Maawad, Abdel Salam Makhlouf Abdel-Moneim, Elnagdi Mohamed Hilmy, HeteroCycles, 2007, vol. 71, no. 9, p. 1951.
Aly, H.M. and El-Gazzar, M.G., Arzneim. Forsch., 2012, vol. 62, no. 3, p. 105.
Kim, H., Mitton, D.B., and Latanision, R.M., Corros. Sci., 2010, vol. 52, p. 801.
Tien, J.K., Howson, T.E., Chen, G.L., and Xie, X.S., J. Met., 1980, vol. 12, p. 20.
Friend, W.Z., Corrosion of Nickel and Nickel-Base Alloy, New York: Wiley, 1980.
Song, S.Y., jun, X.K., and Wei, C., Mater. Prot., 2001, vol. 34, p. 38.
Nable, J., Gulbinska, M., Suib, S.L., and Galasso, F., Surf. Coat. Technol., 2003, vol. 173, p. 74.
Chuanyong Cui, Yuefeng Gu, Hiroshi Harada, and Akihiro Sato, Metall. Mater. Trans. A, 2005, vol. 36, p. 2921.
Pradeep Kumar, G.S., Keshavamurthy, R., Prachi Kumari, and Chirag Dubey, Perspect. Sci., 2016, vol. 8, p. 172.
Ruppi, S., Int. J. Refract. Met. Hard Mater., 2005, vol. 23, p. 306.
Ghazoui, A., Zarrouk, A., Bencaht, N., Salghi, R., Assouag, M., El Hezzat, M., Guenbour, A., and Hammouti, B., J. Chem. Pharm. Res., 2014, vol. 6, p. 704.
Dinnappa, R.K. and Mayanna, S.M., J. Appl. Electrochem., 1982, vol. 11, p. 111.
Patel, N., Rawat, A., Jauhari, S., and Mehta, G., Eur. J. Chem., 2010, vol. 1, p. 129.
Langmuir, I., J. Am. Chem. Soc., 1947, vol. 39, p. 1848.
Bhat, J.I. and Alva, V.D.P., J. Korean Chem. Soc., 2011, vol. 55, p. 835.
Oguzie, E.E., Okolue, B.N., Ebenso, E.E., Onuoha, G.M., and Onuchukwu, A.I., Mater. Chem. Phys., 2004, vol. 87, p. 394.
Aramaki, K. and Hackerman, N., J. Electrochem. Soc., 1969, vol. 116, p. 568.
Tang, L., Li, X., Li, L., Mu, G., and Liu, G., Mater. Chem. Phys., 2006, vol. 97, p. 301.
Ghibate, R., Sabry, F., Kharbach, Y., KandriRodi, Y., Skalli, M.K., Haoudi, A., Senhaji, O., Touzani, M., Taouil, R., Aouniti, A., and Hammouti, B., Int. J. Eng. Res. Appl., 2015, vol. 5, no. 12, p. 22.
Baeza, H., Guzm’an, M., Ortega, P., and Vera, L., J. Chil. Chem. Soc., 2003, vol. 48, no. 3, p. 23.
Amira, W.A.W. E., Rahim, A.A., Osman, H., Awang, K., and Raja, P.B., Int. J. Electrochem. Sci., 2011, vol. 6, no. 7, p. 2998.
Rafiquee, M.Z.A., Khan, S., Saxena, N., and Quraishi, M.A., Port. Electrochim. Acta, 2007, vol. 25, p. 419.
Ambrish, S., Ashish Kumar, S., and Quraishi, M.A., Open Electrochem. J., 2010, vol. 2, p. 43.
Tsuru, T., Haruyama, S., and Gijutsu, B., J. Jpn. Soc. Corros. Eng., 1978, vol. 27, p. 573.
McCafferty, E. and Hackerman, N., J. Electrochem. Soc., 1972, vol. 119, p. 146.
Ma, H., Chen, S., Niu, L., Zhao, S., Li, S., and Li, D., J. Appl. Electrochem., 2002, vol. 32, p. 65.
Bosch, R.W. and Bogaerts, W.F., Corrosion, 1996, vol. 52, p. 204.
Gamry Echem Analyst Manual, 2003.
Prabhu, R.A., Venkatesha, T.V., Shanbhag, A.V., Kulkarni, G.M., and Kalkhambkar, R.G., Corros. Sci., 2008, vol. 50, p. 3356.
Moretti, G., Quartanone, G., Tassan, A., and Zingales, A., Werkst. Korros., 1994, vol. 45, p. 641.
Prabhu, R.A., Venkatesha, T.V., Shanbhag, A.V., Kulkarni, G.M., and Kalkhambkar, R.G., Corros. Sci., 2008, vol. 50, p. 3356.
Moretti, G., Quartanone, G., Tassan, A., and Zingales, A., Werkst. Korros., 1994, vol. 45, p. 641.
Schweinsberg, D., George, G., Nanayakkara, A., and Steiner, D., Corros. Sci., 1988, vol. 28, p. 55.
Fouda, A.S., Mousa, M.N., Taha, F.I., and Elneanaa, A.I., Corros. Sci., 1986, vol. 26, p. 719.
Ahamad, I. and Quraishi, M.A., Corros. Sci., 2010, vol. 52, p. 651.
Bentiss, F., Lebrini, M., and Lagrenee, M., Corros. Sci., 2005, vol. 47, p. 2915.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Abdallah, Y.M., Elzanaty, H., Mostafa, R. et al. The Effect of TiB2 on Electrochemical Performance of Udimet 700 Alloy in 1 M Hydrochloric Acid Solution and Its Corrosion Inhibition Using Some Organic Derivatives. Prot Met Phys Chem Surf 56, 1051–1065 (2020). https://doi.org/10.1134/S2070205120050032
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205120050032