Abstract
High performance fiber reinforced cementitious composites (HPFRCC) material exhibits strain-hardening and multiple cracking behaviors. Using HPFRCC in the reinforced concrete (RC) frame is considered to improve the seismic performance and damage mechanism of structure. Three beam-column-slab subassemblies were tested under cyclic loading, and eight frame models were simulation by ABAQUS. In this paper, the effect of substitution of concrete with HPFRCC on the seismic performance and damage mechanism of subassemblies was investigated. According to the test results, the lateral bearing capacity and deformability of beam-column-slab subassemblies increased by above 10% through using the HPFRCC material in the expected damage positions. The shear resistance of the joint zone with HPFRCC material increased by 1.6%, the shear deformation of the joint zone decreased by 7.9%. And the contribution of slab bars to the beam flexural bearing strength also decreased for that the yielding range and the strain amplitude of slab bars are limited through using HPFRCC material. Consequently, the subassemblies were prone to the “strong column — weak beam” damage mechanism to using HPFRCC material in the expected damage positions.
Similar content being viewed by others
References
ABAQUS (2012) ABAQUS analysis user’s manual. ABAQUS Inc., Providence, RI, USA
Abdelaleem BH, Ismail MK, Hassan AAA (2020) Structural behavior of rubberized engineered cementitious composite beam-column joints under cyclic loading. ACI Structural Journal 117(2):55–66, DOI: https://doi.org/10.14359/51720194
Deng MK, Ma FD, Song SF, Lv Hao, Sun H (2020) Seismic performance of interior precast concrete beam-column connections with highly ductile fiber-reinforced concrete in the critical cast-in-place regions. Engineering Structures 210, DOI: https://doi.org/10.1016/j.engstruct.2020.110360
Deng MK, Ma FD, Ye W, Yin PF (2018) Experimental study on aseismic behavior of locally used HDC assembled frame beam-column joints. Engineering Mechanics 36(9):68–78, DOI: https://doi.org/10.6052/j.issn.1000-4750.2018.05.0263 (in Chinese)
GB 50010–2010 (2011) Code for design of concrete structures. GB 50010-2010, China Building Industry Press, Beijing, China (in Chinese)
Gou SK, Ding R, Fan JS, Nie X, Zhang J (2018) Seismic performance of a novel precast concrete beam-column connection using low-shrinkage engineered cementitious composites. Construction and Building Materials 192:643–656, DOI: https://doi.org/10.1016/j.conbuildmat.2018.10.103
Li VC (2008) Engineered cementitious composites (ECC) — Material, structural, and durability performance. CRC Press, Boca Raton, FL, USA
Li VC, Kanda T (1998) Engineered cementitious composites for structural applications. Journal of Materials in Civil Engineering 10(2):66–69
Li Y, Liang XW, Deng MK (2012) A constitutive model for high performance PVA fiber reinforced cement composites under conventional triaxial compression. Engineering Mechanics 29(1):106–113 (in Chinese)
Li Y, Liu ZJ, Liang XW (2013) Tensile performance of high performance PVA fiber reinforced cementitious composites under uniaxial tension. Engineering Mechanics 30(1):322–330 (in Chinese)
Liang XW, Lu TT (2018) Seismic evaluation of ECC beam-column-slab subassemblies with various column-to-beam flexural strength ratios. Structural Concrete 19(3):735–746, DOI: https://doi.org/10.1002/suco.201600119
Qudah S, Maalej M (2014) Application of engineered cementitious composites (ECC) in interior beam-column connections for enhanced seismic resistance. Engineering Structures 69:35–245, DOI: https://doi.org/10.1016/j.engstruct.2014.03.026
Shin M, Choi YY, Kim IH, Lee K (2013) Effectiveness of low-cost fiber-reinforced cement composites in hollow columns under cyclic loading. Construction and Building Materials 47:623–635, DOI: https://doi.org/10.1016/j.conbuildmat.2013.05.053
Shin M, Gwona SW, Lee K, Han SW, Jo YW (2014) Effectiveness of high performance fiber-reinforced cement composites in slender coupling beams. Construction and Building Material 68:476–490, DOI: https://doi.org/10.1016/j.conbuildmat.2014.06.089
Shin M, LaFave JM (2004) Seismic performance of reinforced concrete eccentric beam-column connections with floor slabs. ACI Structural Journal 101(3):403–412, DOI: https://doi.org/10.14359/13100
Shwan HS, Hashim AR (2016) Structural behavior of RC engineered cementitious composite (ECC) exterior beam-column joints under reversed cyclic loading. Construction and Building Materials 107:226–234, DOI: https://doi.org/10.1016/j.conbuildmat.2016.01.001
Sun CJ, Li QH, Lv JF (2018) SMechanical performance of steel reinforced UHTCC composite joint under static loading. Journal of Building Structures 35(S1):62–66, DOI: https://doi.org/10.14006/j.jzjgxb.2017.S1.052 (in Chinese)
Yuan F, Pan JL, Xu Z, Leung CKY (2013) A comparison of engineered cementitious composites versus normal concrete in beam-column joints under reversed cyclic loading. Materials & Structures 46:145–159, DOI: https://doi.org/10.1617/s11527-012-9890-6
Acknowledgments
The authors may wish to express their appreciation for the financial support provided by the National Natural Science Foundation of China (No. 51278402) for this work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lu, TT., Liang, XW. Effect of HPFRCC on Seismic Performance of Beam-Column-Slab Subassembly. KSCE J Civ Eng 24, 3785–3796 (2020). https://doi.org/10.1007/s12205-020-0097-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-0097-z