Hull form design for resistance minimization of small-scale LNG bunkering vessels using numerical simulation

https://doi.org/10.1016/j.ijnaoe.2020.10.005Get rights and content
Under a Creative Commons license
open access

Abstract

This paper aims to provide the most useful method of determining an optimum LCB position and design direction of fore- and aft-body hull shape for a SLBV. It is known that the SLBV has a lower length-to-beam ratio, larger Cb and simpler stern shape designed for the installation of azimuth thrusters comparing to those of conventional LNG carriers. Due to these specific particulars of SLBV, the optimum LCB position was very different to that of conventional LNG carrier. And various approaches were applied to determine the optimum fore- and aft-body hull shape. The design direction for the optimum hull-form was evaluated as the minimization of the total resistance which includes the wave-making resistance and form-drag with numerical simulation.

Keywords

SLBV (Small LNG Bunkering vessel)
Hull-form
Optimum design
Resistance

Cited by (0)

Peer review under responsibility of Society of Naval Architects of Korea.