It is shown for glass with the composition 15Na2O ∙ 10CaO ∙ 75SiO2 that busbars can be formed on conductive coatings by means of cold gas-dynamic spraying.
Similar content being viewed by others
References
V. F. Solinov and Y. L. Greenstein, Structural Optics of Aircraft [in Russian], NITS JSC, Moscow (1996).
Z. Koryakova and V. Bitt, “Low-melting glasses with a certain complex of physical and mechanical properties,” Komponenty Tekhnol., No. 5, 3 – 5 (2004).
N. M. Bobkova, “Low-melting glasses based on leadborate systems (review),” Steklo Keram., No. 6, 12 – 15 (2009); N. M. Bobkova, “Low-melting glasses based on leadborate systems (review),” Glass Ceram., 66(5 – 6), 206 – 209 (2009).
D. K. Chakvetadze, Yu. A. Spiridonov, V. I. Savinkov, et al., “Lead titanate granulometric composition effect on CLTE of low-melting glass-composition materials for vacuum-tight low-temperature soldering of corundum parts,” Steklo Keram., No. 5, 34 – 37 (2017); D. K. Chakvetadze, Yu. A. Spiridonov, V. I. Savinkov, et al., “Lead titanate granulometric composition effect on CLTE of low-melting glass-composition materials for vacuum-tight low-temperature soldering of corundum parts,” Glass Ceram., 74(5 – 6), 176 – 179 (2017).
D. K. Chakvetadze, É. M. Zinina, Yu. A. Spiridonov, and V. N. Sigaev, “Physical-chemical properties of low-melting phosphate glasses in relation to tin oxide content,” Steklo Keram., No. 1, 3 – 7 (2019); D. K. Chakvetadze, É. M. Zinina, Yu. A. Spiridonov, and V. N. Sigaev, “Physical-chemical properties of low-melting phosphate glasses in relation to tin oxide content,” Glass Ceram., 76(1 – 2), 3 – 6 (2019).
H. Attia, M. Meshreki, A. Korashy, et al., “Fretting wear characteristics of cold gas-dynamic sprayed aluminum alloys,” Tribol. Int., 44(11), 1407 – 1416 (2011).
R. B. Heimann, J. I. Kleiman, E. Litovsky, et al., “High-pressure cold gas-dynamic (CGD)-sprayed alumina-reinforced aluminum coatings for potential application as space construction material,” Surf. Coat. Technol., 252, 113 – 119 (2014).
B. Jodoin, L. Ajdelsztajn, E. Sansoucy, et al., “Effect of particle size, morphology, and hardness on cold gas dynamic sprayed aluminum alloy coatings,” Surf. Coat. Technol., 201(6), 3422 – 3429 (2006).
C. H. Wu and J. E. Palao, “Cold spray surface patterning of aluminum on aluminum, silicon, glass, and printed circuit board substrates,” Surf. Coat. Technol., 349, 928 – 940 (2018).
K. J. Hodder, H. Izadi, A. G. McDonald, and A. P. Gerlich, “Fabrication of aluminum – alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing,” Mater. Sci. Eng. A, 556, 114 – 121 (2012).
N. M. Melendez and A. G. McDonald, “Development of WC-based metal matrix composite coatings using low-pressure cold gas dynamic spraying,” Surf. Coat. Technol., 214, 101 – 109 (2013).
D. Lioma, N. Sacks, and I. Botef, “Cold gas-dynamic spraying of WC–Ni cemented carbide coatings,” Int. J. Refract. Metals Hard Mater., 49, 365 – 373 (2015).
A. Sova, S. Grigoriev, A. Okunkova, and I. Smurov, “Potential of cold gas dynamic spray as additive manufacturing technology,” Int. J. Adv. Manuf. Technol., 69(9 – 12), 2269 – 2278 (2013).
A. K. Nedaivoda, V. I. Mikheev, and V. A. Polovtsev, “Composite coatings in space technology obtained by cold gas-dynamic spraying,” Polet, No. 11, 19 – 25 (2002).
O. F. Klyuev, A. I. Kashirin, A. V. Shkodkin, and T. V. Buzdygar, “Technology of gas-dynamic deposition of metal coatings. Part 1. The process of forming coatings,” Svarshchik, No. 4(32), 25 – 27 (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 8, pp. 3 – 7, August, 2020.
Rights and permissions
About this article
Cite this article
Petrachkov, D.N., Samsonov, V.I., Sigaev, V.N. et al. Formation of Busbars by the Gas-Dynamic Method on Glass with a Conductive Coating. Glass Ceram 77, 291–294 (2020). https://doi.org/10.1007/s10717-020-00291-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-020-00291-8