Skip to main content
Log in

Exploration of Jitter in Solid-State Switch-Based Pulse Power Supply of Copper Vapor Laser

  • Published:
Journal of Russian Laser Research Aims and scope

Abstract

The copper vapor laser (CVL) is the most powerful and efficient resonance metastable metal-vapor laser having widespread applications. Jitter requirements are very stringent when the CVL is operated in the oscillator–amplifier configuration. Jitter in the laser affects proper synchronization and thereby affects the output power and its stability. Although thyratron-based power supplies have low jitter, it has limited operational life. So, solid-state switch-based pulse power supply is preferable. In the solid-state switch-based pulse power supply of CVL, several parameters simultaneously contribute to jitter in the laser optical output. To observe the parameter-affecting jitter and its contribution, we carry out MATLAB simulations, which are experimentally validated. We demonstrate by simulation and experiments that variations in the laser load impedance significantly contribute to jitter and, by minimizing the effect of laser load variations on the power supply, jitter in the laser can be significantly reduced.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. C. E. Little, Metal Vapour Lasers: Physics Engineering and Applications, John Wiley (1999).

    Google Scholar 

  2. S. Behrouzinia, M. Zand, A. Namdar, et al., Int. J. Fund. Phys. Sci., 1, 60 (2011).

    Google Scholar 

  3. R. S. Hargrove, R. Grove, and T. Kan, IEEE J. Quantum Electron., 15, 1228 (1979).

    Article  ADS  Google Scholar 

  4. G. Sridhar, S. Singh, and L. M. Gantayet, Opt. Commun., 282, 1196 (2009).

    Article  ADS  Google Scholar 

  5. R. S. Hargrove, and T. Kan, IEEE J. Quantum Electron., 16, 1108 (1980).

    Article  ADS  Google Scholar 

  6. M. A. Kazaryan, N. A. Lyabin, A. N. Soldatov, and N. A. Yudin, J. Russ. Laser Res., 26, 373 (2005).

    Article  Google Scholar 

  7. V. V. Zubov, N. A. Lyabin, V. I. Mishin, et al., Sov. J. Quantum Electron., 13, 1266 (1983).

    Article  ADS  Google Scholar 

  8. P. A. Bokhan, P. P. Gugin, D. E. Zakrevskii, et al., Quantum Electron., 43, 715 (2013).

    Article  ADS  Google Scholar 

  9. D. V. Ghodke and K. Muralikrishnan, RRCAT Newsletter, 22, 26 (2009).

    Google Scholar 

  10. D. Durga Praveen Kumar, L. M. Gantayet, S. Singh, et al., Rev. Sci. Instr., 83, 025105 (2012).

    Article  ADS  Google Scholar 

  11. C. Huang, R. Saethre, P. Melcher, and R. Ness, 14th IEEE Pulsed Power Conference, 127 (2003).

  12. A. S. Rawat, R. Vijayan, S. V. Mondal, et al., J. Instr. Soc. India, 42, 36 (2012).

    Google Scholar 

  13. Jaegu Choi, J. Electr. Engin. Technol., 5, 484 (2010).

    Article  Google Scholar 

  14. D. Chatroux, J. Maury, and B. Hennevin, Proc. SPIE, 145, 1859 (1993).

    ADS  Google Scholar 

  15. J. V. Hill, D. G. Ball, and D. N. Garnett, Contribution to The 8th IEEE Pulsed Power Conference, San Diego, California, USA, June 17–19 (1991).

  16. R. K. Mishra, D. V. S. Raju, and S. V. Nakhe, Rev. Sci. Instr., 86, 116107 (2015).

    Article  ADS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Dheeraj K. Singh.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Singh, D.K., Dikshit, B., Kawade, N.O. et al. Exploration of Jitter in Solid-State Switch-Based Pulse Power Supply of Copper Vapor Laser. J Russ Laser Res 41, 628–637 (2020). https://doi.org/10.1007/s10946-020-09917-2

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10946-020-09917-2

Keywords

Navigation