Tailored transition temperature plastic crystals with enhanced thermal energy storage capacity

https://doi.org/10.1016/j.solmat.2020.110848Get rights and content
Under a Creative Commons license
open access

Highlights

  • TES capacity of plastic crystal based composites was enhanced by adding paraffins.

  • Transition temperature was tailored by means of binary plastic crystal systems.

  • SSPCMs microstructure was related to their high paraffin retention capacity.

  • SSPCMs have potential to enhance TES systems compactness up to 2–3 times.

  • Capex reduction up to 40% for TES systems could be achieved with the proposed SSPCMs.

Abstract

Pentaerythritol (PE), pentaglycerine (PG), and neopentylglycol (NPG) are non-ionic plastic crystal with high potential for latent heat thermal energy storage (TES) in solar heating applications. These molecules undergo reversible solid phase transitions with unusually large enthalpy of transition (110 J/g - 300 J/g) in the temperature range from 44 °C to 185 °C. To further enhance their heat storage capacity while lowering their price and preserving the advantage of solid phase transitions, a new class of shape-stabilized phase change materials (SSPCMs) in which a polyalcohol with adjustable solid phase transition properties (NPG/PG or PE/PG mixture) supports a cheaper and with higher latent heat solid-liquid PCM (paraffin wax) is proposed in this work. Combined with properly chosen paraffin waxes, NPG/PG mixtures allow tailoring the working temperature of corresponding SSPCMs between 24 °C and 81 °C, whereas PE/PG mixtures allow SSPCMs with phase change adjusted within 81 °C–190 °C temperature range. Produced SSPCMs were thoroughly characterized and their efficiency in terms of heat storage capacity and delivered power upon heat discharge were evaluated. The results achieved show proper anti-leakage effect due to good wettability between paraffins and polyalcohols and inner microstructure of SSPCMs promoting capillarity. In addition, volumetric latent heat storage capacity has been proven to be enhanced up to 45% compared to pure polyalcohols without detrimental effect in discharging power.

Keywords

Shape-stabilized phase change material
Plastic crystal
Latent heat
Thermal energy storage
Solid-solid PCM
Solar heating

Cited by (0)