Avoiding Dendrite Formation by Confining Lithium Deposition Underneath Li-Sn Coatings

23 October 2020, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

The use of interfacial layers to stabilize the lithium surface is a popular research direction for improving the morphology of deposited lithium and suppressing lithium dendrite formation. This work considers a different approach to controlling dendrite formation where lithium is plated underneath an interfacial coating. In the present research, a Li-Sn intermetallic was chosen as a model system due to its lithium-rich intermetallic phases and high Li diffusivity. These coatings also exhibit a significantly higher Li exchange current than bare Li thus leading to better charge transfer kinetics. The exchange current is instrumental in determining whether lithium deposition occurs above or below the Li-Sn coating. High-resolution transmission electron microscopy and cryogenic focused ion beam scanning electron microscopy were used to identify the features associated with Li deposition. Atomic scale simulations provide insight as to the adsorption energies determining the deposition of lithium below the Li-Sn coating.

Keywords

Lithium Metal Anode
Lithium Dendrites
Lithium Tin Coating
Lithium Plating

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.