Abstract
This article discusses specific operation features of automated process control systems (APCS) designed for a controlled cooling device of rolled products focused on accelerated cooling and engineering features of equipment. The objectives and structure of two-level APCS have been defined, and control algorithms of the cooling mode have been described for controlled the cooling facility in a rolling mill train.
Similar content being viewed by others
REFERENCES
Streisselberger, A., Kirsch, H.-J., and Schwinn, V., Process developments in TMCP to produce heavy plates in high strength steel grades, Proc. 2nd Int. Conf. on Thermo-Mechanical Processing of Steels (TMP’2004), June 15–17,2004, Liege, 2004, pp. 275–284.
Bogachev, D.V., Ershov, E.V., and Varfolomeev, I.A., Optimal mode for accelerated cooling units, Materialy X Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Avtomatizatsiya i energosberezhenie mashinostroitel’nogo i metallurgicheskogo proizvodstva, tekhnologiya i nadezhnost’ mashin, priborov i oborudovaniya” (Proc. X Int. Sci.-Tech. Conf. “Automation and Energy Saving in Machine Engineering and Metallurgical Industries, Technology, and Reliability of Machines, Devices, and Equipment”), Vologda: Vologodsk. Gos. Univ., 2015, pp. 31–35.
Lipunov, Yu.I., Eismondt, K.Yu., Nekrasova, E.V., and Zavgorodnev, D.V., Automated control system for the thermal hardening of rolled steel in the mill, Steel Transl., 2009, vol. 39, no. 12, pp. 1068–1072.
Lipunov, Yu.I. and Eismondt, K.Yu., Development of highly efficient technologies and devices of controlled cooling for heat hardening of metal, Materialy VII Mezhdunarodnoi konferentsii “Energosberegayushchie tekhnologii v promyshlennosti. Pechnye agregaty. Ekologiya” (Proc. VII Int. Conf. “Energy Saving Technologies in Industry. Furnace Units. Ecology”), Moscow: Mosk. Inst. Stali Splavov, 2014, pp. 281–286.
Lipunov, Yu.I., Eismondt, K.Yu., Zavgorodnev, D.V., et al., Automated control system for of cooling on the 5000 mill, Stal’, 2005, no. 3, pp. 61–65.
Eismondt, K.Yu., Zavgorodnev, D.V., Nekrasova, E.V., et al., Automated control system for the thermohardening of reinforcement at a 350 mill, Steel Transl., 2007, vol. 37, no. 6, pp. 532–535.
Lipunov, Yu.I., Eismondt, K.Yu., Myagkov, K.A., et al., Section for the thermal hardening of reinforcement in the casting and rolling system of the 280 mill, Steel Transl., 2010, vol. 40, no. 3, pp. 285–289.
Lipunov, Yu.I., Eismondt, K.Yu., Abramov, E.V., et al., Launching of a line for the production of rail linings at the Nizhne-Salda Metallurgical Plant, Trudy 9‑go Mezhdunarodnogo kongressa prokatchikov (Proc. Ninth Int. Congr. of Mill Workers), Cherepovets: Chermetinformatsiya, 2013, pp. 112–115.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by I. Moshkin
About this article
Cite this article
Lipunov, Y.I., Eismondt, K.Y. & Nekrasova, E.V. Automated Control Systems for Thermal Hardening of Rolled Products in Rolling Mill Train. Steel Transl. 50, 351–355 (2020). https://doi.org/10.3103/S0967091220050071
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091220050071