Abstract
A simplified monitoring head is proposed, and its kinematic accuracy is analyzed. The effectiveness of this head—that is, the monitoring precision—when monitoring manufacturing tolerances depends on the length of the probe.
Similar content being viewed by others
REFERENCES
Val’kov, V.M., Kontrol’ v GAP (Control in Flexible Manufacturing Automation), Leningrad: Mashinostroenie, 1986.
Ratmirov, V.A., Upravlenie stankami gibkikh proizvodstvennykh sistem (Machine Control in Flexible Manufacturing Systems), Moscow: Mashinostroenie, 1987.
Gibkie proizvodstvennye kompleksy (Flexible Manufacturing Complexes), Belyanin, P.N. and Leshchenko, V.A., Eds., Moscow: Mashinostroenie, 1984.
Gibkoe avtomaticheskoe proizvodstvo (Flexible Manufacturing Automation), Maiorov, S.A., Orlovskii, G.V., and Khalkiopov, S.N., Eds., Leningrad: Mashinostroenie, 1985.
Korkin, V.B., Grigor’yants, T.V., Makarov, E.F., et al., Osnovy avtomatizatsii izmerenii (Principles of Automated Measurements), Moscow: Izd. Standartov, 1991.
Liberman, Ya.L., RF Inventor’s Certificate no. 1 599 646, 1990.
Liberman, Ya.L. and Turova, I.A., RF Patent 80 228, 2008.
Liberman, Ya.L. and Turova, I.A., RF Patent 80 229, 2009.
Liberman, Ya.L. and Semakin, A.A., RF Patent 87 514, 2009.
Liberman, Ya.L. and Makhiyanova, A.N., RF Patent 188 494, 2019.
Korn, G.A. and Korn T.M., Mathematical Handbook for Scientists and Engineers, New York: McGraw-Hill, 1968.
Liberman, Ya.L., Sistemy monitoringa dlya metallorezhushchikh stankov (The Control systems for Metal Cutting Mahcines), Yekaterinburg: Ural. Gos. Tekh. Univ., 2000.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Liberman, Y.L., Makhiyanova, A.N. & Gorbunova, L.N. Accuracy of Simplified Head for Monitoring Manufacturing Tolerances. Russ. Engin. Res. 40, 819–821 (2020). https://doi.org/10.3103/S1068798X20100135
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20100135