Abstract
A gear-shift device based on rollers is proposed for a gearbox with composite gears and built-in clutches. For the sake of speed, the drive is an electric step motor with a combination of a screw pair and a wedge mechanism at the shaft. That increases the controllability of the clutch.
Similar content being viewed by others
REFERENCES
Remizovich, Yu.V., Control of load’s speed of ascent in crane operation, Vestn. Mashinostr., 2012, no. 6, pp. 13–15.
Remizovich, Yu.V., Control of load’s speed of ascent in crane operation, Russ. Eng. Res., 2012, vol. 32, nos. 7–8, pp. 529–531.
Remizovich, Yu.V., Eremina, S.V., and Kurbatskaya, O.V., RF Patent 160 353, 2016.
Rumyantsev, L.A., Planetary gearbox control devices, Stroit. Dorozhn. Mash., 2014, no. 11, pp. 31–35.
Dlougii, V.V., Tsurikov, A.P., and Yanush, B.V., Privody mashin: spravochnik (Machine Drives: Handbook), Dlougii, V.V., Ed., Leningrad: Mashinostroenie, 1988, 2nd ed.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Remizovich, Y.V., Abdulaeva, O.V. Gear-Shift Device for Crane Gearboxes. Russ. Engin. Res. 40, 801–803 (2020). https://doi.org/10.3103/S1068798X20100214
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20100214