Abstract
In this study, we experimentally tested slide bearings made of modified pressed wood (MPW), showing that a high probability of their failure occurs when the counterbody surface hardness is less than 50 HRC. For the first time, laboratory tests of antifriction properties of MPW bushings with counterbodies having various hardness of the contact surface were performed in order to predict the operating modes of friction units of machines and mechanisms. In experiments according to the “shaft–partial insert” scheme on a 2070 SMT-1 friction machine, 45, 45Kh, and 18KhGT-steel rollers were used as a counterbody. The hardened steel rollers were tempered to low, medium, and high temperatures in order to obtain various hardness of the contact surface. The pressed wood inserts were impregnated with MC-20 mineral aviation oil thickened with a high-molecular additive.
Similar content being viewed by others
REFERENCES
Nevzorova, A.B., Vrublevskii, V.B., Matusevich, C.O., and Vrublevskaya, V.I., Podshipniki skol’zheniya samosmazyvayushchiesya na osnove modifitsirovannoi drevesiny (teoriya, tekhnologiya i praktika): monografiya (Self-Lubricating Sliding Bearing Based on Modified Wood: Theory, Technology, and Practice. Monograph), Gomel: Bel. Gos. Univ. Transp., 2011.
Maiseenko, V.L., Creation of self-aligning sliding bearings based on compacted wood and their manufacturing technology, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Minsk, 2002.
Nevzorova, A.B., Vrublevskii, V.B., Vrublevskaya, V.I., Graft, G.A., and Zhuravlev, Yu.A., EU 022 215, Byull. Izobret., 2015, no. 11.
Anikeyeva, M.V. and Kuznetsova, V.V., Selection of the material for production of internal rings for sliding bearings, Vestn. Gomel. Gos. Tekh. Univ. im. P.O. Sukhogo, 2017, no. 2, pp. 55–63.
Shamaev, V.A., Nikulina, N.S., and Medvedev, I.N., Modifitsirovannaya drevisina: monografiya (Modified Wood: Monograph), Moscow: Flinta, 2013.
Birman, A.R., Friction parts from compacted wood, LesPromInform, 2017, no. 6, pp. 142–144.
Bogdanovich, P.N., Prushak, V.Ya., and Bogdanovich, S.P., Trenie, smazka i iznos v mashinakh: uchebnik (Friction, Lubrication, and Wear in Machines: Manual), Minsk: Tekhnalogiya, 2011.
Aksenov, A.A. and Vinnik, N.I., Uzly treniya s podshipnikami iz pressovannoi drevesiny: monografiya (Friction Units from Compacted Wood: Monograph), Saarbrucken: LAP LAMBERT Academic. 2013.
Shamaev, V.A., Parinov, D.A., and Polilov, A.N., Study of the plain bearings of modified wood for heavy-loaded friction assemblies, J. Mach. Manuf. Reliab., 2018, vol. 47, no. 2, pp. 168–172.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. Ivanov
About this article
Cite this article
Anikeyeva, M.V., Vrublevskaya, V.I. Antifrictional Characteristics of Sliding Bearings from Modified Pressed Wood. J. Frict. Wear 41, 453–458 (2020). https://doi.org/10.3103/S1068366620050025
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366620050025