Abstract
The use of the following quality-control instruments in the machining of cylindrical liners at repair shops is considered: Shewhart charts (of moving-range and individual-measurement types) and histograms for analysis of the adjustment precision. A monitoring checklist has been developed for determining the losses due to all defect types. Interchangeability among groups for piston–liner assemblies completely eliminates wasted inventory.
Similar content being viewed by others
REFERENCES
Dorokhov, A.S., Korneev, V.M., and Kataev, Yu.V., Technical service in the system of engineering-technical support of agroindustrial complex, Sel. Mekhanizator, 2016, no. 8, pp. 2–5.
Bondareva, G.I., Input control and metrological support at technical service enterprises, Sel. Mekhanizator, 2017, no. 4, pp. 36–38.
Leonov, O.A. and Shkaruba, N.Zh., A parametric failure model for the calculation of the fit tolerance of joints with clearance, J. Frict. Wear, 2019, vol. 40, no. 4, pp. 332–336.
Erohin, M., Leonov, O., Kataev, U., and Vergazova, U., Calculation of fits for cylindrical connections with key for reducers in agricultural machinery, Proc. 18th Int. Sci. Conf. “Engineering for Rural Development,” Jelgava, 2019, pp. 469–474.
Erokhin, M.N., Relationship of accuracy and reliability of joints in reparation of agricultural machines, Vestn. Mosk. Gos. Agroinzh. Univ., 2006, no. 2, pp. 22–25.
Pastukhov, A.G., Evaluation of quality of assembled units by functional parameters, Vse Mater., 2014, no. 3, pp. 9–16.
Bondareva, G.I., Changes to the standard of a unified tolerance and fitting system, Trakt. Sel’khozmash., 2016, no. 12, pp. 39–42.
Bondareva, G.I., The influence of the measurement tool error on losses during the reparation of agricultural machines, Mekh. Elektrif. Sel’sk. Khoz., 2007, no. 11, pp. 27–29.
Nabatnikov, Yu.F., Selective assembly of machine parts in mining machine engineering, Gorn. Inf.-Anal. Byull., 2014, no. 8, pp. 159–164.
Sorokin, M.N. and Anurov, Yu.N., Formalization of the method of intergroup interchangeability in the implementation of selective assembly of products, Sborka Mashinostr., Priborostr., 2011, no. 8, pp. 16–19.
Nabatnikov, Yu.F., PrEnsure of a particular service life of machine parts, Sborka Mashinostr., Priborostr., 2011, no. 4, pp. 3–8.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Leonov, O.A., Shkaruba, N.Z., Vergazova, Y.G. et al. Quality Control in the Machining of Cylinder Liners at Repair Enterprises. Russ. Engin. Res. 40, 726–731 (2020). https://doi.org/10.3103/S1068798X20090105
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20090105