Abstract
The results of experimental studies into the regularities of the plastic deformation of F-4 polytetrafluoroethylene under free compression depending on the pressure and temperature of heating of the primary blank are given; their influence on the structural changes in the deformed material is shown. It is estimated that the moldability of F-4 polymer samples is observed starting from the heating temperature range of 60–100°C and compacting pressure of 1–1.5 MPa. A further increase in pressure and temperature does not lead to any significant enhancement of the moldability of the material.
Similar content being viewed by others
REFERENCES
Teng, H., Overview of the development of the fluoropolymer industry, Appl. Sci., 2012, vol. 2, no. 2, pp. 496–512. https://doi.org/10.3390/app2020496
Loginov, B.A., Villemson, A.L., and Buznik, V.M., Rossiiskie ftorpolimery: istoriya, tekhnologii, perspektivy (Russian Fluoropolymers: History, Technologies, and Prospects), Moscow: Giitsvetmet, 2013.
Tekhnologiya pererabotki polimerov. Fizicheskie i khimicheskie protsessy: uchebnoe posobie dlya vuzov (Polymer Processing Technology: Physical and Chemical Processes: A Textbook for Institutions of Higher Education), Kerber, M.L., Ed., Moscow: Yurait, 2017, 2nd ed.
Andreev, A.A., Buznik, V.M., D’yachenko, A.N., and Kantaev, A.S., Method of increasing yield of fluoropolymer powders in thermal destruction of polytetrafluoroethylene waste, Theor. Found. Chem. Eng., 2013, vol. 47, pp. 449–452. https://doi.org/10.1134/S0040579513040039
Poluektov, V.L., Baronin, G.S., Buznik, V.M., Khudyakov, V.V., and Poluektova, S.L., A reinforcing solid-phase technology for producing shaped articles from nanocomposites based on F-4 using intensive plastic deformation, Vestn. Tambov. Univ.,Ser.: Estestv. Tekh. Nauki, 2016, vol. 21, no. 3, pp. 1250–1254.
Nikolaeva, I.P., Ogorodov, L.I., and Yakovleva, E.L., Creep of polytetrafluoroethylene modifications under various loading conditions, Stroit. Unik. Zdanii Sooruzh., 2017, no. 3 (54), pp. 7–17.
Baronin, G.S., Stolin, A.M., Kerber, M.L., and Dmitriev, V.M., Pererabotka polimerov i kompozitov v tverdoi faze: uchebnoe posobie (Processing of Polymers and Composites in the Solid Phase: A Textbook), Tambov: Tambov. Gos. Univ., 2009.
Mainikova, N.F., Mishchenko, S.V., Zhukov, N.P., and Rogov, I.V., Metody i sredstva nerazrushayushchego teplovogo kontrolya strukturnykh prevrashchenii v polimernykh materialakh (Methods and Techniques for Nondestructive Thermal Control of Structural Transformations in Polymeric Materials), Tambov: Tambov. Gos. Tekh. Univ., 2012.
Loginov, B.A., Udivitel’nyi mir ftorpolimerov (The Amazing World of Fluoropolymers), Moscow: Devyatyi Element, 2009, 2nd ed.
Galyshev, S.N., Zaripov, N.G., Bazhin, P.M., and Stolin, A.M., Effect of a scale factor on the formability, phase composition, and microstructure of the material based on the MAX phase of the Ti–Al–C system, Perspekt. Mater., 2015, no. 11, pp. 63–70.
Lebedev, Yu.A., Korolev, Yu.M., Polikarpov, V.M., Ignat’eva, L.N., and Antipov, E.M., X-ray powder diffraction study of polytetrafluoroethylene, Crystallogr. Rep., 2010, vol. 55, no. 4, pp. 609–614. https://doi.org/10.1134/S1063774510040127
Kulagina, T.P., Vyaselev, O.M., Pugachev, D.V., and Stolin, A.M., Determination of the supramolecular structure of polytetrafluoroethylene by the NMR relaxation method, Dokl. Phys. Chem., 2012, vol. 443, pp. 63–66. https://doi.org/10.1134/S001250161204001X
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
We have no conflicts of interest to declare.
Additional information
Translated by P. Vlasov
Rights and permissions
About this article
Cite this article
Bazhin, P.M., Stolin, A.M. & Buznik, V.M. Deformation as a Measure of the Ability of Polytetrafluoroethylene towards Product Forming in Solid Phase Processing. Theor Found Chem Eng 54, 732–736 (2020). https://doi.org/10.1134/S004057952004003X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S004057952004003X