The paper describes the main stages of the development of sectional and shaped profiles by the JSC “EVRAZ NTMK” over the past years. The plant operates three longitudinal rolling mills, each of which has been producing both construction metal structures and transport products for many decades. Every year, market competition causes increased consumer requirements toward product quality and requires expansion of the product assortment. Therefore, developing new profiles is an ongoing process at the JSC “EVRAZ NTMK.” The following transport profiles have been developed: stirrup stop bar, rail pad bar R-65, insulated joint core bar ApATeK R-65 MK-BO, guard-rail angle SP850, subway conductor rail, I-beam No. 19 used in the construction of a center girder of the pivoted unit of the rail cars, and a non-standard I-beam 13C1 manufactured according to the technical agreement with the Research and Production Enterprise (RPE) “Uralvagonzavod.” Due to consumer requests, the heavy-section and rail-and-beam shops of the JSC “EVRAZ NTMK” started production of the U-channel line, since such series is more preferable when manufacturing metal constructions compared to V-channel sloping along the inner side of the flange, previously produced at the JSC “EVRAZ NTMK.” In recent years, the railand-beam shop started production of the entire line of crane rails. In just the past 5 years, over 60 standard I-beam sizes have been implemented under the wide-flange beam rolling shop conditions according to various standards, including a foreign ASTM A6/A6M-2017a standard and BS EN 10365–2017 standard, as well as GOST R 57837–2017 developed by EVRAZ together with the Central Research Institute of Building Structures (TsNIISK) named after V. A. Kucherenko. The process of developing new profiles at the JSC “EVRAZ NTMK” continues. In 2020 alone, it is planned to start production of more than 20 new types and nominal sizes of the hot-rolled sectional and shaped profiles.
Similar content being viewed by others
References
I. A. Alekseeva and N. I. Novikov, “On the issue of business innovation policy (case study: EVRAZ LLC),” Nauchnoe Obozreniye, No. 1, 74–79 (2017).
L. F. Shaybakova and S. V. Novoselov, “Trends, specifics, and challenges of the development of ferrous metallurgy in Russia,” Upravlenets, No. 5 (69), 40–49 (2017).
N. I. Novikova and G. V. Novikova, “Specifics of the development of ferrous metallurgy in Russia,” Izv. Irkutsk Gos. Econom. Acad., No. 4, 95–100 (2011).
A. A. Kirichkov, “Production of transport metal at the OJSC NTMK,” Stal’, No. 5, 65 (2000).
V. V. Dorofeev et al., “Method for rolling asymmetrical channeled shapes,” RF Patent No. 2254178, Application No. 2004105761/02, Filing date: February 25, 2004, Publication date: June 20, 2005.
Yu. I. Lipunov et al., “Thermal hardening of a rail pad by jet water cooling,” Stal’, No. 8, 88–91 (2014).
V. V. Dorofeev et al., “New method of rolling angular asymmetrical shapes,” RF Patent No. 2288048, Application No. 2005115921/02, Filing date: May 25, 2005, Publication date: November 27, 2006.
GOST 5267.5–90, I-Beam Section No.19 for Center Girder.
GOST 8240–97, Hot-Rolled Steel Channels.
GOST 4121–95, Crane Rails.
GOST R 53866–2010, Crane Rails, Specifications.
A. A. Grats, V. V. Sviridenko, and R. A. Litvinov, “Experience of manufacturing crane rails at the JSC EVRAZ NTMK,” Proc. 11th Int. Congr. Roll. Mill Operators (2017), pp. 156–160.
A. A. Grats, V. V. Sviridenko, and R. A. Litvinov, “Experience of manufacturing crane rails from grade K76F steel at the JSC EVRAZ NTMK production,” Chernye Metally, No. 7, 24–27 (2018).
GOST 8510–86, Hot-Rolled Steel Unequal-Leg Angles.
GOST 8509–93, Hot-Rolled Steel Equal-Leg Angles.
V. V. Borodin, D. Ye. Kavun, K. N. Shvedkov, and K. Ye. Sokolov, “New assortment — new achievements. Beam by the OJSC EVRAZ NTMK for construction of sports facilities,” Chernye Metally, No. 5 (1001), 32–34 (2015).
GOST R 57837–2017, Hot-ROLLED STEEL I-BEAMS with Parallel Edges of Flanges. Specifications.
A. V. Sautin, “Production of I-beam profiles as an extension of the assortment of the wide-flange beam rolling shop at the OJSC EVRAZ NTMK,” Akt. Probl. Sovr. Nauki Tekhn. Obraz., 1, 70, 322–323 (2012).
A. A. Kirichkov, K. S. Drozdetskaya, and V. A. Bykov, “Universal beam-rolling mill,” Stal’, No. 2, 45 (1983).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 64, No. 6, pp. 27–31, June, 2020.
Rights and permissions
About this article
Cite this article
Kavun, D.E., Sviridenko, V.V. & Rubtsov, V.Y. Production of New Types of Rolled Products — Customer Focus. Metallurgist 64, 514–521 (2020). https://doi.org/10.1007/s11015-020-01021-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-020-01021-9