Abstract
Dye treatments in industrial wastewaters causes numerous obstacles while stains exist normally constant to radiance as well as corrosion and thus, aerobic digestion. The removal of Congo red dye in low concentration from acidic aqueous solution is the main objective of present work. Synthesis of Acrylamide (AM), Diallyl Dimethyl Ammonium Chloride Propylene (DADMAC) and Acryloyloxyethyltrimethyl ammonium chloride (DAC) (PADD) were carried by UV-initiated polymerization, and polyacrylamide (PAM) as contrast sample. Several analytical techniques existed employed to characterization and demonstrate the productive synthesize of PADD, characteristics and composition of the flocculants was studied through FTIR, 1HNMR while thermal stability of PADD in addition PAM was studied by TGA. In addition, the strong structure of surface morphology was confirmed by scanning electronic microscopy (SEM). Established effective process was used to evaluate the flocculation behaviour with special characteristics. Measuring the parameters, dosage of flocculants, flocculation time, temperature, flocculants initial concentration of Congo red dye, stirring speed and zeta potential in removal of Congo red efficiently in acid aqueous environment. These factors presented that in the condition of strong acidity, low concentration and charge neutralization, the adsorption and bridging effect of PADD on Congo red dye was dominant. Under the idyllic conditions concentration of dye 3.0 mg L−1 and pH 6.0, the maximum removal rates of Congo red dye have been 96.45% and 81.10%, PADD and PAM, respectively. PADD provides a scientific basis platform for the removal of Congo red dye efficiently.
Similar content being viewed by others
References
F. Ferrarini, L.R. Bonetto, J.S. Crespo, M. Giovanela, Removal of Congo red dye from aqueous solutions using a halloysite-magnetite-based composite. Water Sci. Technol. 73, 2132–2142 (2016)
L. Pereira, A. Madalen, strategies for sustainable development (Springer, Dordrecht, 2012), pp. 111–162
S. Chawla, H. Uppal, M. Yadav, N. Bahadur, N. Singh, Zinc peroxide nanomaterial as an adsorbent for removal of Congo red dye from wastewater. Ecotoxicol. Environ. Saf. 135, 68–74 (2017)
F.B.A. Rahman, M. Akter, Removal of dyes form textile wastewater by adsorption using shrimp shell. Int. J. Waste Resour. 6(3), 02–05 (2016)
G. Zhou, J. Luo, C. Liu, L. Chu, J. Crittenden, Efficient heavy metal removal from industrial melting effluent using fixed-bed process based on porous hydrogel adsorbents. Water Res. 131, 246 (2018)
A. Prasad, K.V.B. Rao, Physicochemical analysis of textile effluent and decolorization of textile azo dye by Bacillus Endophyticus strain VITABR13. IIOAB J 2(2), 55–62 (2011)
N.A. Oladoja, Y.D. Aliu, Evaluation of plantain peelings ash extract as coagulant aid in the coagulation of colloidal particles in low pH aqua system. Water Qual. Res. J. Can. 43(2008), 231–238 (2008)
E. do Vale-Junior, D.R. da Silva, A.S. Fajardo, C.A. MartinezHuitle, Treatment of an azo dye effluent by peroxi-coagulation and its comparison to traditional electrochemical advanced processes. Chemosphere 204, 548 (2018)
M.K. Purkait et al., Removal of congo red using activated carbon and its regeneration. J. Hazard. Mater. 145, 287–295 (2007)
F.A. Pavan et al., Removal of Congo red from aqueous solution by anilinepropylsilica xerogel. Dyes Pigments 76, 64–69 (2008)
A. Rais, R. Kumar, Adsorption studies of hazardous malachite green onto treated ginger waste. J. Environ. Manag. 91, 1032–1038 (2010)
P.A. Bedekar, S.D. Kshirsagar, A.R. Gholave, S.P. Govindwar, Degradation and detoxification of methylene blue dye adsorbed on water hyacinth in semi continuous anaerobic-aerobic bioreactors by novel microbial consortium-SB. RSC Adv. 5, 99228 (2015)
Q. Sun et al., Dual polydopamine-anion polyacrylamide polymer system for improved removal of nickel ions and methylene blue from aqueous solution. Sci. Adv. Mater. 11, 116–127 (2019)
A.I. Del Río, J. Fernández, J. Molina, J. Bonastre, F. Cases, Electrochemical treatment of a synthetic wastewater containing a sulphonated azo dye. Determination of naphthalenesulphonic compounds produced as main by-products. Desalination 273, 428–435 (2011)
N.A. Oladoja, Y.D. Aliu, Snail shell as coagulant aid in the alum precipitation of malachite green from aqua system. J. Hazard Mater. 164, 1496–1502 (2009)
R. Han, D. Ding, Y. Xu, W. Zou, Y. Wang, Y. Li, L. Zou, Use of rice husk for the adsorption of Congo red from aqueous solution in column mode. Bioresource Technol. 99, 2938–2946 (2008)
X. Li, H.L. Zheng, B.Y. Gao, Y.J. Sun, B.Z. Liu, C.L. Zhao, UV-initiated template copolymerization of AM and MAPTAC: microblock structure, copolymerization mechanism, and flocculation performance. Chemosphere 167, 71–81 (2017)
Q.Q. Guan, H.L. Zheng, J. Zhai, B.Z. Liu, Y.J. Sun, Y.L. Wang, Z.N. Xu, C. Zhao, Preparation, characterization, and flocculation performance of P(acrylamide-co-diallyldimethylammonium chloride) by UV-initiated template polymerization. J. Appl. Polym. Sci. 132, 41747 (2015)
L. Wang, J. Wang, S. Zhang, Y. Chen, S. Yuan, G. Sheng, H. Yu, A water-soluble cationic flocculant synthesized by dispersion polymerization in aqueous salts solution. Sep. Purif. Technol. 67, 331–335 (2009)
M. Wang, L. Feng, X. Fan, D. Li, W. Qu, S. Jiang, S. Li, Fabrication of bifunctional chitosan-based flocculants: characterization, assessment of flocculation and sterilization performance. Materials 11, 10 (2018)
L. Feng, S. Liu, H. Zheng, J. Liang, Y. Sun, S. Zhang, X. Chen, Using ultrasonic (US)-initiated template copolymerization for preparation of an enhanced cationic polyacrylamide (CPAM) and its application in sludge dewatering. Ultrason. Sonochem. 44, 53–63 (2018)
F. Davatchi et al., Mesenchymal stem cell therapy for knee osteoarthritis. Preliminary report of four patients. Int. J. Rheum. Dis. 14, 211–215 (2011)
L. Feng, X. Li, W. Lu, Z. Liu, C. Xu, Y. Chen, H. Zheng, Preparation of a graft modified flocculant based on chitosan by ultrasonic initiation and its synergistic effect with kaolin for the improvement of acid blue 83 (AB 83) removal. Int. J. Biol. Macromol. 150, 617–630 (2020)
A. Sand, M. Yadav, D.K. Mishra, K. Behari, Modification of alginate by grafting of N-vinyl-2-pyrrolidone and studies of physicochemical properties in terms of swelling capacity, metal-ion uptake and flocculation. Carbohyd. Polym. 80, 1147–1154 (2010)
J. Liu et al., An integrated model for assessing heavy metal exposure risk to migratory birds in wetland ecosystem: a case study in Dongting Lake Wetland, China. Chemosphere 135, 14–19 (2015)
H.L. Zheng, J.Y. Ma, C.J. Zhu, Z. Zhang, L.W. Liu, Y.J. Sun, X.M. Tang, Synthesis of anion polyacrylamide under UV initiation and its application in removing dioctyl phthalate from water through flocculation process. Sep. Purif. Technol. 123, 35–44 (2014)
C.L. Zhao, H.L. Zheng, L. Feng, Y.L. Wang, Y.Z. Liu, B.Z. Liu, B. Djibrine, Improvement of sludge dewater ability by ultrasound-initiated cationic polyacrylamide with micro block structure: the role of surface-active monomers. Materials 10, 282 (2017)
Y.J. Sun, C.Y. Zhu, W.Q. Sun, Y.H. Xu, X.F. Xiao, H.L. Zheng, H.F. Wu, C.Y. Liu, Plasma-initiated polymerization of chitosan-based CS-g-P(AM-DMDAAC) flocculant for the enhanced flocculation of low-algal-turbidity water. Carbohyd. Polym. 164, 222–232 (2017)
K. Sarfaraz, Y. Liu, H. Zheng, Q. Sun, A. Navarro, X. Zheng, W. Ding, Synthesis of hydrophobic cationic polymeric flocculants by the introduction of a hydrophobic monomer, cationic monomer and the application in sludge dewatering. Sci. Adv. Mater. 12, 715–724 (2020)
X. Li, H.L. Zheng, Y.L. Wang, Y.J. Sun, B.C. Xu, C.L. Zhao, Fabricating an enhanced sterilization chitosan-based flocculant: synthesis, characterization, evaluation of sterilization and flocculation. Chem. Eng. J. 319, 119–130 (2017)
H. Wang, J. Cui, W. Jiang, Synthesis, characterization and flocculation activity of novel Fe(OH)3-polyacrylamide hybrid polymer. Mater. Chem. Phys. 130, 993–999 (2011)
Q. Xu, H. Liu, H. Zheng, J. Liang, UV-H2O2 preparation of cationic polyacrylamide (CPAM) and its application in sludge dewatering. Sci. Adv. Mater. 11, 842–853 (2019)
B. Cao et al., Effects of pH on coagulation behavior and floc properties in Yellow River water treatment using ferric based coagulants. Chin. Sci. Bull. 55(14), 1382–1387 (2010)
H.N.J. Hoong, I. Nurhazwani, Removal of dye in wastewater by adsorption-coagulation combined system with Hibiscus sabdariffa as the coagulant MATEC Web 152, 8 (2018)
L. Feng, J. Liu, C. Xu, W. Lu, D. Li, C. Zhao, B. Liu, X. Li, K. Sarfaraz, H. Zheng, Y. Sun, Better understanding the polymerization kinetics of ultrasonic-template method and new insight on sludge floc characteristics research. Sci. Total Environ. 689, 546–556 (2019)
O.S. Amuda, I.A. Amoo, Coagulation/flocculation process and sludge conditioning in beverage industrial wastewater treatment. J. Hazard Mater. 141, 778–783 (2007)
R. Li, B. Gao, K. Guo, H. Zheng, Q. Yue, Floc structural characteristics of ferrum-polymer dual-coagulant for treatment of synthetic dyes wastewater: effect of solution pH, hardness and ionic strength. RSC Adv. 6, 94851 (2016)
G.C. Zhu, H.L. Zheng, Z. Zhang, T. Tshukudu, P. Zhang, X.Y. Xiang, Characterization and coagulation-flocculation behaviour of polymeric aluminum ferric sulfate (PAFS). Chem. Eng. J. 178, 50 (2011)
J. Jiang, N.J.D. Graham, Enhanced coagulation using Al/Fe (III) coagulants: effect of coagulant chemistry on the removal ofcolour-causing NOM. Environ. Technol. 17, 937–950 (1996)
G. Rios, C. Pazos, J. Coca, Destabilization of cutting oil emulsions using inorganic salts as coagulants. Colloid Surf. A 138, 383–389 (1998)
H. Aziz, S. Alias, F. Assari, M.N. Adlan, The use of alum, ferric chloride and ferrous sulphate as coagulants in removing suspended solids, colr and COD from semi-aerobic landfill leachate at controlled pH. Waste Manag. Res. 25, 556–565 (2007)
F. Xiaoa, J.H. Huanga, B. Zhangb, C. Cuib, Effects of low temperature on coagulation kinetics and floc surface morphology using alum. Desalination 237(2009), 201–213 (2009)
H. Patel, R.T. Vashi, Removal of Congo Red dye from its aqueous solution using natural coagulants. J Saudi Chem Soc 16, 131–136 (2012)
L. Feng, H. Zheng, X. Tang, X. Zheng, S. Liu, Q. Sun, M. Wang, The investigation of the specific behavior for the cationic block structure and its excellent flocculation performance in high turbidity water treatment. RSC Adv. 8, 15119–15133 (2018)
A.K. Verma, R.R. Dash, P. Bhunia, A review on chemical coagulation/flocculation technologies for removal of colour from textile wastewaters. J. Environ. Manag. 93, 154–168 (2012)
H. Du, N. Harata, F. Li, Responses of riverbed sediment bacteria to heavy metals: integrated evaluation based on bacterial density, activity and community structure under well-controlled sequencing batch incubation conditions. Water Res. 130, 115 (2018)
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Khan, S., Zheng, H., Sun, Q. et al. Synthesis and characterization of a novel cationic polyacrylamide-based flocculants to remove Congo red efficiently in acid aqueous environment. J Mater Sci: Mater Electron 31, 18832–18843 (2020). https://doi.org/10.1007/s10854-020-04422-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-020-04422-3