Abstract—The dependence of the impact strength and damping characteristics of сBN–Al composite materials on the specific surface (grain size) of cubic boron nitride powders has been investigated. The correlation between the damping characteristics of the composite material and its phase composition has been established. The dependence of the phase composition of the material on the specific surface of the powdered cBN component has been demonstrated. Composite materials with a biphasic structure and the highest density and hardness possible for this structure had the maximal impact strength.
Similar content being viewed by others
REFERENCES
Shul’zhenko, A.A., Bozhko, S.A., Sokolov, A.N., et al., Sintez, spekanie i svoistva kubicheskogo nitrida bora (Synthesis, Sintering, and Properties of Cubic Boron Nitride), Kiev: Naukova Dumka, 1993.
Barry, J., Akdogan, G., Smyth, P., McAvinue, F., and O’Halloran, P., Application areas for PCBN materials, Ind. Diamond Rev., 2006, vol. 66, no. 3, pp. 46–53.
Sverkhtverdye materialy. Poluchenie i svoistva (Superhard Materials: Production and Use), vol. 5: Obrabotka materialov lezviinym instrumentom (Material Processing by Blade Tools), Novikov, N.V., Ed., Kyiv: Ins. Sverkhtverd. Mater. im. V.N. Bakulya, 2006.
Bezhenar, M.P., Physicochemical interaction during sintering of cubic boron nitride with aluminum at high pressure, Sverkhtverd. Mater., 1999, no. 2, pp. 4–11.
Sverkhtverdye materialy. Poluchenie i svoistva (Superhard Materials: Production and Use), vol. 1: Sintez almaza i podobnykh materialov (Synthesis of Diamond and Similar Materials), Novikov, N.V., Ed., Kyiv: Ins. Sverkhtverd. Mater. im. V.N. Bakulya, 2003.
Benko, E., Morgiel, J., and Czeppe, T., BN sintered with Al: Microstructure and hardness, Ceram. Int., 1997, vol. 23, no. 1, pp. 89–91.
McKie, A. Winzer, J., Sigalas, I., Herrmann, M., Weiler, L., and Rödel, J., Mechanical properties of cBN–Al composite materials, Ceram. Int., 2011, vol. 37, no. 1, pp. 1–8.
Devin, L.N., Determination of the physicomechanical characteristics of brittle materials on small samples, Probl. Mitsn., 2018, no. 6, pp. 99–109.
Devin, L.N., Determination of maximum tensile strength of polycrystalline superhard materials, Sverkhtverd. Mater., 1988, no. 2, pp. 24–28.
Devin, L.N., Naidenko, A.G., and Nimchenko, T.V., UA Patent 23804, Byull. Izobret., 2007, no. 8.
Devin, L.N., Stakhniv, N.E., and Sulima, A.G., Automated system for measuring the acoustic emission signal during precision diamond turning, Materialy Mezhdunarodnogo nauchno-tekhnicheskogoseminara “Sovremennye problemy proizvodstva i remonta v promyshlennosti i na transporte,” g. Svalyava, Karpaty, 21–25 fevralya 2011 g. (Proc. Int. Sci.-Tech. Seminar “Modern Problems in Production and Reparation in Industry and Transport,” Svalyava, Carpathian, February 21–25, 2011), Kyiv: Assots. Tekhnol. Mashinostr. Ukr., 2011, pp. 79–81.
Glagovskii, B.A., Roishtein, G.Sh., and Yashin, V.A., Kontrol’no-izmeritel’nye pribory i osnovy avtomatizatsii proizvodstva abrazivnykh instrumentov (Control-Measurement Devices and Principles of Automated Manufacturing of Abrasive Tools), Leningrad: Mashinostroenie, 1980.
Glagovskii, B.A. and Chofnus, E.G., Frequency control of self oscillations of constructions, Izmerit. Tekh., 1966, no. 3, pp. 38–44.
Devin, L.M., Bondarenko, V.P., Osadchyi, O.A., and Nimchenko, T.V., Application of acoustic methods for the monitoring of products made of hard alloys, Mater. Sci., 2009, vol. 45, no. 3, pp. 392–398.
Baranov, V.M., Determination of elasticity constants of the dick-like material samples, Zavod. Lab., 1972, no. 9, pp. 1120–1124.
Bezhenar, N.P., Konoval, S.M., Bozhko, S.A., Belyavina, N.N., and Markiv, V.Ya., Reaction interaction in cBN–Al system at high pressure, Fiz. Tekh. Vys. Davlenii, 2009, vol. 19, no. 2, pp. 41–47.
Bezhenar, N.P., Bozhko, S.A., Belyavina, N.N., Markiv, V.Ya., and Nagornyi, P.A., Phase composition of polycrystals obtained by reactive sintering of cubic boron nitride with aluminum, Sverkhtverd. Mater., 2002, no. 1, pp. 37–48.
Konoval, S.M. and Bezhenar, M.P., Structural heterogenity of superhard composites of the cBN–Al system, in Sintez, spekanie i svoistva sverkhtverdykh materialov (Synthesis, Sintering, and Properties of Superhard Materials), Kyiv: Logos, 2010, pp. 107–112.
Konoval, S.M., Garbuz, T.O., Bezhenar, M.P., Bozhko, S.A., and Nagornii, P.A., Simulation of the porous and grain structure during two-stage sintering of superhard PCBN cBN-Al and cBN–TiB2(TiN)–Al systems, in Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya i primeneniya (Mineral Destructing and Metal Processing Tools: Production Technique and Use), Kyiv: Ins. Sverkhtverd. Mater. im. V.N. Bakulya, 2008, no. 11, pp. 180–188.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by S. Semenova
About this article
Cite this article
Devin, L.N., Bezhenar, M.P., Rychev, S.V. et al. The Effect of Charge Grit on Impact Strength and Damping Characteristics of BN–Al Composite Materials. J. Superhard Mater. 42, 190–198 (2020). https://doi.org/10.3103/S1063457620030041
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457620030041