Abstract
A spherulite-mesh structure model, which allows prediction of functional properties (wear resistance, heat resistance, and dissipative ability), is proposed after studying the structural features of glass-ceramic spinel-pyroxene materials. The parameters of a dendritic geometry of a glass phase and the spherulite index characterizing the parameters of crystalline components have a significant effect on the functional properties.
Similar content being viewed by others
REFERENCES
Solntsev, S.S., High-temperature composite materials and coatings on the basis of glass and ceramics for aerospace technics, Russ. J. Gen. Chem., 2011, vol. 81, no. 5, pp. 992–1000.
Volokitin, O.G. and Vershchagin, V.I., Physicochemical processes of the production of high-temperature silicate melts, Izv. Vyssh. Uchebn. Zaved.,Khim. Khim. Tekhnol., 2013, vol. 56, no. 8, pp. 71–76.
Kulinich, E.A., Khabas, T.A., and Vereshchagin, V.I., Development of glass ceramic coatings containing hydroxyapatite, Glass Ceram., 2007, vol. 64, nos. 3–4, pp. 143–145.
Ignatova, A.M. and Vereshchagin, V.I., Use of the image analysis in the study and statistical evaluation of the parameters of the particles of the solid component of welding aerosols with silicate and oxide composition, Vestn. Perm. Nats. Issled. Politekh. Univ., Mahsinostr. Materialoved., 2017, no. 1, pp. 41–52.
Petrova, A.G., The mathematical model of liquid epitaxy from ternary solution, Izv. Altai. Gos. Univ., 2010, no. 1-1, pp. 56–61.
Fedotov, Zh.A., Petrochemical model of mantle magmatism, Vestn. Kol’sk. Nauchn. Tsentra, Ross. Akad. Nauk, 2012, no. 1, pp. 114–127.
Makarov, A.A., Highly porous cellular materials: a statistical model of geometric structure, Inorg. Mater.: Appl. Res., 2016, vol. 7, no. 4, pp. 576–581.
Oparina, I.B., Kolmakov, A.G., Sevost’yanov, M.A., and Lysenkov, A.S., Production of optically transparent shock-resisting ceramics by the methods of powder metallurgy (review), Inorg. Mater.: Appl. Res., 2019, vol. 10, no. 4, pp. 825–835.
Chainikova, A.S., Voropaeva, M.V., Alekseeva, L.A., Orlova, L.A., and Samsonov, V.I., Modern developments in the field of radiolucent cordierite glass metals (a review), Aviats. Materl. Tkehnol., 2014, no. 6, pp. 45–51.
Ignatova, A.M., Research and development of abrasive wear patterns of synthetic mineral alloys by sclerometric measurements, Vestn. Tambov. Gos. Univ., Ser.: Estestv. Tekh. Nauki, 2010, vol. 15, no. 3-2, pp. 1203–1207.
Artemov, A.O., Naumov, S.V., Ignatova, A.M., and Ignatov, M.N., Mineralogical and petrographic characteristics of technogenic mineral resources of the Ural and Cis-Ural region for their processing by petrurgy, Georesursy, 2012, no. 6 (48), pp. 79–83.
Yatsenko, E.A., Goltsman B.M., Smolii V.A., and Kosarev, A.S., Foamed slag glass—eco-friendly insulating material based on slag waste, Proc. 2015 IEEE 15th Int. Conf. on Environment and Electrical Engineering (EEEIC), Piscataway, NJ: Inst. Electr. Electron. Eng., 2015, pp. 819–823.
Smolii, V.A., Yatsenko, E.A., Kosarev, A.S., and Gol’tsman, B.M., Development of compositions and technological parameters for the synthesis of cellular glass heat-insulation construction materials with prescribed density, Glass Ceram., 2016, vol. 73, nos. 5–6, pp. 219–221.
Smirnov, V.V., Obolkina, T.O., Krylov, A.I., Smirnov, S.V., Gol’dberg, M.A., Antonova, O.S., Titov, D.D., and Barinov, S.M., Agglomeration and properties of ceramics based on partially stabilized zirconium dioxide containing oxides of aluminum and iron, Inorg. Mater.: Appl. Res., 2018, vol. 9, no. 1, pp. 121–124.
Yatsenko, E.A., Gol’tsman, B.M., Kosarev, A.S., Karandashova, N.S., Smolii, V.A., and Yatsenko, L.A., Synthesis of foamed glass based on slag and a glycerol pore-forming mixture, Glass Phys. Chem., 2018, vol. 44, no. 2, pp. 152–155.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. Tulyabaev
Rights and permissions
About this article
Cite this article
Ignatova, A.M., Vereschagin, V.V. Prediction of Properties of Cast Spinelide-Pyroxene Glass-Ceramic Materials through Parameters of Spherulite-Mesh Structure Model. Inorg. Mater. Appl. Res. 11, 1002–1007 (2020). https://doi.org/10.1134/S2075113320040140
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113320040140