Abstract
This study presents the method of forming an exact self-similar solution to the problem of hydrodynamic computation of a wedge-shaped support (slider, guide), which operates in the presence of a lubricant, a fusible metal coating on the surface of the guide, and a porous material on the surface of the slider taking the dependence of the viscosity of the lubricant and the permeability of porous material on pressure into account.
Similar content being viewed by others
REFERENCES
Kropachev, D.Yu., Grishin, A.A., and Maslo, A.D., Methods of the rapid measurement of the temperature of melt metals for the needs of engineering enterprises, Lit’e Metall., 2012, no. 3 (66), p. 126.
Wilson, W.R.D., Lubrication by a melting solid, Trans. ASME,J. Lubr. Tech., 1976, vol. 98, no. 1, p. 22.
Beretta, G.P., Niro, A., and Silvestri, M., Friction bearings lubricated by their own melt or by product of sublimation, Works Am. Soc. Eng., 1992, vol. 1, p. 86.
Fizicheskie velichiny. Spravochnik (Physical Values, The Handbook), Moscow: Energoatomizdat, 1991.
Khavin, V.Ya., Kratkii khimicheskii spravochnik (Concise Chemical Reference Book), Leningrad: Khimiya, 1991.
Perel’man, V.I., Kratkii spravochnik khimika (Chemist’s Concise Reference Book), Moscow: Khimiya, 1964.
Spravochnik po paike (Soldering Reference Book), 2nd ed., Moscow: Mashinostroenie, 1984.
Opatskikh, A.N., Mukutadze, M.A., and Mukutadze, A.M., V-shaped sliding bearings using micropolar lubricants caused by a melt accounting for the dependence of lubricant viscosity and porous lauer permeability on pressure, J. Phys.: Conf. Ser., 2019, vol. 1353, p. 012025. https://doi.org/10.1088/1742-6596/1353/1/012025
Mukutadze, M.A., Vasilenko, V.V., Mukutadze, A.M., and Opatskikh, A.N., Mathematical model of a plain bearer lubricated with molten metal, IOP Conf. Ser.: Earth Environ. Sci., 2019, vol. 378, p. 012021. https://doi.org/10.1088/1755-1315/378/1/012021
Mukutadze, M.A. and Khasyanova, D.U., Radial friction bearing with a fusible coating in the turbulent friction mode, J. Mach. Manuf. Reliab., 2019, no. 48, p. 423. https://doi.org/10.3103/S1052618819050066
Funding
This study was supported by the Ministry of Science and Higher Education of the Russian Federation within the framework of the Federal Target Program “Research and Development in Priority Directions for the Development of the Russian Science and Technology Complex for 2014–2020,” Subsidy Agreement no. 075-15-2019-1865 of December 2, 2019 (internal agreement no. 05.607.21.0300), project no. RFMEFI60719X0300.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by K. Gumerov
About this article
Cite this article
Mukutadze, M.A., Khasyanova, D.U. & Mukutadze, A.M. Hydrodynamic Model of a Wedge-Shaped Sliding Support with an Easy-Melting Metal Coating. J. Mach. Manuf. Reliab. 49, 314–320 (2020). https://doi.org/10.3103/S105261882004010X
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S105261882004010X