Abstract
An algorithm implementing the vector approximation of values for the stiffness matrix of a finite element in the curvilinear coordinate system for a shell of revolution is presented. The algorithm is based on the Timoshenko hypothesis about the inclination of the normal to the middle surface of the shell.
Similar content being viewed by others
REFERENCES
Novozhilov, V.V., Teoriya tonkikh obolochek (Theory of Thin Shells), St. Petersburg: SPb. Univ., 2010.
Galimov, K.Z., Paimushin, V.N., and Teregulov, I.G., Osnovaniya nelineinoi teorii obolochek (The Foundations of the Nonlinear Theory of Shells), Kazan: Fen, Akad. Nauk Tatarstana, 1996.
Timoshenko, S.P. and Voinovskii-Kriger, S., Plastinki i obolochki (Plates and Shells), Moscow: Nauka, 1966.
Rickards, R.B., Metod konechnykh elementov v teorii obolochek i plastin (The Finite Element Method in the Theory of Shells and Plates), Riga: Zinatne, 1988.
Chernykh, K.F., Lineinaya teoriya obolochek (Linear Theory of Shells), Leningrad: LGU, 1962, 1964.
Golovanov, A.I., Tyuleneva, O.N., and Shigabutdinov, A.F., Metod konechnykh elementov v statike i dinamike tonkostennykh konstruktsii (The Finite Element Method in the Statics and Dynamics of Thin-Walled Structures), Moscow: Fizmatlit, 2006.
Storozhuk, E.A. and Yatsura, A.V., Exact solutions of boundary-value problems for noncircular cylindrical shells, Int. Appl. Mech., 2016, vol. 52, no. 4, p. 386.
Nikolaev, A.P., Shubovich, A.A., and Marchenko, S.S., Analysis of geometrically nonlinear shells of revolution based on the finite element method with the vector interpolation of desired quantities, Russ. Aeronaut., 2013, vol. 56, no. 4, p. 327.
Bouledroua, O., Elazzizi, A., Hadjmeliani, M., Pluvinage, G., and Matvienko, Y.G., T-stress estimation by the two-parameter approach for a specimen with a V-shaped notch, J. Appl. Mech. Tech. Phys., 2017, vol. 58, no. 3, p. 546.
Azikov, N.S. and Pavlov, E.A., Investigation in rigidity of a lattice composite plate, Aviats. Prom-st’, 2016, no. 3, p. 46.
Bathe, K.-J. and Wilson, E., Numerical Methods in Finite Element Analysis, Englewood Cliffs, NJ: Prentice-Hall, 1976.
Zheleznov, L.P., Kabanov, V.V., and Boiko, D.V., Nonlinear deformation and stability of discretely reinforced elliptical cylindrical shells under transverse bending and internal pressure, Russ. Aeronaut., 2014, vol. 57, no. 2, p. 118.
Sheshenin, S.V. and Bakhmet’ev, S.G., A model of the effective rubber-cord ply, Mosc. Univ. Mech. Bull., 2014, vol. 69, no. 5, p. 109.
Krivoshapko, S. N., Ivanov, V. N., Encyclopedia of Analytical Surfaces, Switzerland: Springer Int., 2015.
Sedov, L.I., Mekhanika sploshnoi sredy (A Course in Continuum Mechanics), Moscow: Nauka, 1976; Groningen, Netherlands: Wolters-Noordhoff, 1971, vol. 1.
Funding
This study was supported by the Russian Foundation for Basic Research and the Administration of Volgograd oblast (project no. 19-41-343003 r_mol_a).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by E. Oborin
About this article
Cite this article
Klochkov, Y.V., Nikolaev, A.P., Ishchanov, T.R. et al. FEM Vector Approximation for a Shell of Revolution with Account for Shear Deformations. J. Mach. Manuf. Reliab. 49, 301–307 (2020). https://doi.org/10.3103/S105261882004007X
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S105261882004007X