Skip to main content

Advertisement

Log in

Sodium sulfate influence on the electrodeposition of MnO2 films for application in Supercapacitors

  • Original Paper
  • Published:
Journal of Solid State Electrochemistry Aims and scope Submit manuscript

Abstract

Manganese dioxide (MD) was synthesized by cyclic voltammetry using 0.5 mol L−1 MnSO4·6H2O as the precursor solution, with and without the 0.05 mol L−1 of Na2SO4 support electrolyte solution, and effect was studied by several techniques. The AFM analysis allowed the study of the substrate and synthesized films topography; SEM images showed the differences in the morphology and thickness of the films. Through XRD analysis, it was possible to observe the crystallinity of the materials, caused by the influence of Na2SO4 during electrodeposition and electrochemical characterization, which made it possible to obtain results that served as parameters during the studies proposed here. The voltammograms showed the differences in theoretical capacitance of 0.5 mol L−1 manganese dioxide with Na2SO4 (MDNa) and for 0.5 mol L−1 manganese dioxide without the 0.05 mol L−1 of Na2SO4, which were 860.25 and 455 F g−1, respectively, while in the GCD tests, they present 375 and 250 F g−1 of specific capacitance for the 0.5 mol L−1 MDNa and 0.5 mol L−1 MD electrodes; all results measured in 0.5 A g−1. The EIS studies by the Nyquist and Bode plots made it possible to analyze the resistivity regions and the capacitive nature of the materials. It can be concluded that the purpose of this study was successfully achieved, since the results are interrelated and confirm that the MDNa electrode has attractive and more advantageous properties than MD for supercapacitor application.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. González A, Goikolea E, Barrena JA, Mysyk (2016) R. Review on supercapacitors: technologies and materials. Renew Sust Energ Rev 58:1189–1206

    Article  CAS  Google Scholar 

  2. Karazhanov SK (2018) Novel materials for batteries, supercapacitors, fuel cells and other advanced technologies. Mater Lett 229:5

    Article  Google Scholar 

  3. Arbizzani C, Mastragostino M, Soavi S (2001) New trends in electrochemical supercapacitors. J Power Sources 100(1-2):164–170

    Article  CAS  Google Scholar 

  4. Raza W, Ali F, Raza N, Luo Y, Kimf KH, Yanga J, Kumar S, Mehmood A, Kwon EE (2018) Recent advancements in supercapacitor technology. Nano Energy 52:441–473

    Article  CAS  Google Scholar 

  5. Chandra A (2012) Supercapacitors: an alternate technology for energy storage. Proceedings of the National Academy of Sciences India Section A - Physical Sciences 82(1):79–90

    Article  CAS  Google Scholar 

  6. Liao F (2019) MnO2 hierarchical microspheres assembled from porous nanoplates for high-performance supercapacitors. Ceram Int 45(1):1058–1066

    Article  CAS  Google Scholar 

  7. Ali GAM, Yusoff MM, Algarni H, Chong KF (2018) One-step electrosynthesis of MnO2/rGO nanocomposite and its enhanced electrochemical performance. Ceram Int 44(7):7799–7807

    Article  CAS  Google Scholar 

  8. Xu M, Bao S (2011) Nanostructured MnO2 for electrochemical capacitor. Energy Storage in the Emerging Era of Smart Grids 492:251–278

    Google Scholar 

  9. Lokhande VC, Lokhande AC, Lokhande CD, Kim JH, Jim T (2016) Supercapacitive composite metal oxide electrodes formed with carbon, metal oxides and conducting polymers. J Alloys Compd 682:381–403

    Article  CAS  Google Scholar 

  10. Relekar BP, Mahadik SA, Jadhav ST, Patil AS (2018) Effect of Electrodeposition potential on surface free energy and supercapacitance of MnO2 thin films. J Electron Mater 47(5):2731–2738

    Article  CAS  Google Scholar 

  11. Wanchaem T, Rattanamai S, Dulyaseree P, Khanchaitit P, Wongwiriyapan W (2017) Facile synthesis of hybrid manganese oxide and multiwalled carbon nanotube by two-step electrodeposition for supercapacitor electrode. Materials Today: Proceedings 4:6620–6625

    Google Scholar 

  12. Li Y, Cai X, Shen W (2014) Preparation and performance comparison of supercapacitors based on nanocomposites of MnO2 with cationic surfactant of CTAC or CTAB by direct electrodeposition. Electrochim Acta 256:306–315

    Article  CAS  Google Scholar 

  13. Nguyen T, João Carmezim M, Boudard M, Fátima Montemor M (2015) Cathodic electrodeposition and electrochemical response of manganese oxide pseudocapacitor electrodes. Int J Hydrog Energy 40(46):16355–16364

    Article  CAS  Google Scholar 

  14. Xing J, Li H, Xia Z, Chen J, Zhang Y, Zhong L (2014) Influence of substrate morphology on the growth and properties of TiO2 nanotubes in HBF4-based electrolyte. Electrochim Acta 134:242–248

    Article  CAS  Google Scholar 

  15. Gambou-Bosca A, Bélanger D (2016) Electrochemical accessibility of porous submicron MnO2 spheres as active electrode materials for electrochemical capacitors. Electrochim Acta 201:20–29

    Article  CAS  Google Scholar 

  16. Choumane R, Peulon S (2019) Electrodeposited birnessite thin film: an efficient eco-friendly sorbent for removing heavy metals from water. Colloids Surf A Physicochem Eng Asp 577:594–603

    Article  CAS  Google Scholar 

  17. Wang X, Goucheng L, Libing L, Guangsheng W (2015) Manganese oxide –an excellent microwave absorbent for the oxidation of methylene blue. RSC Adv 5:55595–55601

    Article  CAS  Google Scholar 

  18. Yuqi J (2019) Definitions of pseudocapacitive materials: a brief review. Energy & Environmental Materials 2:30–37

    Article  Google Scholar 

  19. Davoglio RA, Cabello G, Marco JF, Biaggio SR (2018) Synthesis and characterization of α-MnO2 nanoneedles for electrochemical supercapacitors. Electrochim Acta 261:428–435

    Article  CAS  Google Scholar 

  20. Gogotsi Y (2018) Energy storage in nanomaterials - capacitive, pseudocapacitive, or battery-like? ACS Nano 12(3):2081–2083

    Article  CAS  Google Scholar 

  21. Singh A (2019) Morphology-controlled electrochemical capacitive behavior of manganese oxide films. Funcional Materials Letters 12:1–4

    Google Scholar 

  22. Xia H, Lai MO, Lu L (2011) Nanostructured manganese oxide thin films as electrode material for supercapacitors. Nanomaterials for Renewable Energy 63:54–59

    CAS  Google Scholar 

Download references

Acknowledgments

The authors would like to thank the Brazilian research funding institutions CNPq, FAPEAM, and CAPES for their support.

Laboratório de Técnicas Mineralógicas, do Departamento de Geologia (UFAM) and to the Laboratório Temático de Microscopia Óptica e Eletrônica (INPA).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to L. A. Pocrifka.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Contribution from XXII. SIBEE conference 2019 – Brazilian Symposium on Electrochemistry and Electroanalysis

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Nascimento, M.C., Silva, E., Costa, J. et al. Sodium sulfate influence on the electrodeposition of MnO2 films for application in Supercapacitors. J Solid State Electrochem 24, 2543–2553 (2020). https://doi.org/10.1007/s10008-020-04773-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10008-020-04773-1

Keywords

Navigation