Skip to main content

Advertisement

SpringerLink
Log in

Tertiary recycling of plastics waste: an analysis of feedstock, chemical and biological degradation methods

  • REVIEW
  • Published:
Journal of Material Cycles and Waste Management Aims and scope Submit manuscript

Abstract

Globally, there is rising awareness of the severity of the plastic waste problem, and the implications of plastics accumulation in the environment. Current methods of waste management are anticipated to be insufficient in mitigating the long-term negative impact on society and the environment. Plastics recycling is one of many solutions that have been proposed, one of the most ecologically-friendly, as well as holding great economic potential by its realization into a circular economy. The technological know-how already exists for a number of different methods for plastic recycling; however, they are broadly uneven in their implementation due to feasibility and cost issues. Here, we review and compare methods of tertiary recycling—that is, complete breakdown of plastics into its chemical component materials—and offer an analysis of the potential obstacles that have to be addressed to increase waste plastic recycling rates. While chemical recycling methods are simpler and are already pilot tested at an industrial level, biological recycling either via microorganisms or biological-derived enzymes are as yet unproven but highly promising technologies. Looking forward, trend shifts towards more ecologically-friendly processes will drive initiatives to close the loop on commercial plastic production.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1

Similar content being viewed by others

References

  1. Geyer R, Jambeck JR, Law KL (2017) Production, use, and fate of all plastics ever made. Sci Adv 3:e1700782

    Google Scholar 

  2. United Nations Environment Program (2018) SINGLE-USE PLASTICS: a roadmap for sustainability. Accessed 26 Apr 2019

  3. World Economic Forum (2016) The new plastics economy: rethinking the future of plastics. https://www.weforum.org/reports/the-new-plastics-economy-rethinking-the-future-of-plastics Accessed 15 Jan 2020

  4. APEC (2009) Understanding the economic benefits and costs of controlling marine debris in the APEC region. https://www.apec.org/Publications/2009/04/Understanding-the-Economic-Benefits-and-Costs-of-Controlling-Marine-Debris-In-the-APEC-Region Accessed 15 Jan 2020

  5. European Commission, Directorate General for Environment (2015). Our Oceans, Seas and Coasts: 10: Marine Litter. http://ec.europa.eu/environment/marine/good-environmental-status/descriptor-10/index_en.htm Accessed 15 Jan 2020

  6. United Nations Environment Program (2014) Valuing plastic: the business case for measuring, managing and disclosing plastic use in the consumer goods industry. Accessed 16 Jan 2020

  7. Van Krevelen DW, Te Nijenhuis K (2009) Properties of polymers: their correlation with chemical structure; their numerical estimation and prediction from additive group contributions, 4th edn. Elsevier, The Netherlands

    Google Scholar 

  8. Michler GH, Balta-Calleja FJ (2016) Mechanical properties of polymers based on nanostructure and morphology, 1st edn. CRC Press, USA

    Google Scholar 

  9. Ribeiro MCS, Fiúza A, Ferreira A, Dinis MDL, Meira Castro AC, Meixedo JP, Alvim MR (2016) Recycling approach towards sustainability advance of composite materials’ industry. Recycling 1:178–193

    Google Scholar 

  10. Yang Y, Boom R, Irion B, van Heerden DJ, Kuiper P, de Wit H (2012) Recycling of composite materials. Chem Eng Process Process Intensif 51:53–68

    Google Scholar 

  11. Saleh TA, Danmaliki GI (2017) Polymer consumption, environmental concerns, possible disposal options, and recycling for water treatment. Advanced nanomaterials for water engineering, treatment, and hydraulics. IGI Global, Hershey, pp 200–222

    Google Scholar 

  12. Michael T (2013) 2—Environmental and social impacts of waste to energy (WTE) conversion plants. Waste to Energy Conversion Technology, Woodhead Publishing Series in Energy pp 15–28

  13. Francis R (2016) Recycling of polymers: methods, characterization and applications. Wiley, Hoboken

    Google Scholar 

  14. Al-Salem SM, Lettieri P, Baeyens J (2009) Recycling and recovery routes of plastic solid waste (PSW): a review. Waste Manage 29(10):2625e43

    Google Scholar 

  15. Singh N, Hui D, Singh R, Ahuja I, Feo L, Fraternali F (2017) Recycling of plastic solid waste: a state of art review and future applications. Compos Part B Eng 115:409–422

    Google Scholar 

  16. Hopewell J, Dvorak R, Kosior E (2009) Plastics recycling: challenges and opportunities. Philos Trans R Soc Lond B Biol Sci 364:2115–2126

    Google Scholar 

  17. Mckinsey (2018) How plastics waste recycling could transform the chemical industry. https://www.mckinsey.com/industries/chemicals/our-insights/how-plastics-waste-recycling-could-transform-the-chemical-industry Accessed 24 Jan 2020

  18. Achilias DS, Roupakias C, Megalokonomos P, Lappas AA, Antonakou EV (2007) Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP). J Hazard Mater 149:536–542

    Google Scholar 

  19. Olah GA, Goeppert A, Prakash GS (2008) Chemical recycling of carbon dioxide to methanol and dimethyl ether: from greenhouse gas to renewable, environmentally carbon neutral fuels and synthetic hydrocarbons. J Org Chem 74:487–498

    Google Scholar 

  20. Keshavarz T, Roy I (2010) Polyhydroxyalkanoates: bioplastics with a green agenda. Curr Opin Microbiol 13(3):321–326

    Google Scholar 

  21. Trivedi P, Hasan A, Akhtar S, Siddiqui MH, Sayeed U, Khan MKA (2016) Role of microbes in degradation of synthetic plastics and manufacture of bioplastics. J Chem Pharm Res 8(3):211–216

    Google Scholar 

  22. Karamanlioglu M, Preziosi R, Robson GD (2017) Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): a review. Polym Degrad Stabil 137:122–130

    Google Scholar 

  23. Luengo JM, Garcia B, Sandoval A, Naharro G, Olivera ER (2003) Bioplastics from microorganisms. Curr Opin Microbiol 6(3):251–260

    Google Scholar 

  24. Yoshida S, Hiraga K, Takehana T et al (2016) A bacterium that degrades and assimilates poly(ethylene terephthalate). Science 351:1196–1199

    Google Scholar 

  25. Al-Salem S, Antelava A, Constantinou A, Manos G, Dutta A (2017) A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). J Environ Manage 197:177–198

    Google Scholar 

  26. Fodor Z, Klemes JJ (2012) Waste as alternative fuel—minimising emissions and effluents by advanced design. Process Saf Environ Prot 90:263e284

    Google Scholar 

  27. Brems A, Baeyens J, Vandecasteele C, Dewil R (2011) Polymeric cracking of waste polyethylene terephthalate to chemicals and energy. J Air Waste Manage Assoc 61(7):721–731

    Google Scholar 

  28. Vijayakumar A, Sebastian J (2018) Pyrolysis process to produce fuel from different types of plastic—a review. IOP Conf Ser Mater Sci Eng 396:012062

    Google Scholar 

  29. Bridgwater AV (2012) Review of fast pyrolysis of biomass and product upgrading. Biomass Bioenerg 38:68–94

    Google Scholar 

  30. Adrados A, Marco I, Caballero B, Lopez-Urionabarrenechea A, Laresgoiti M, Torres A (2012) Pyrolysis of plastic packaging waste: a comparison of plastic residuals from material recovery facilities with simulated plastic waste. Waste Manage 32:826–832

    Google Scholar 

  31. Czajczynska D, Anguilano L, Ghazal H, Krzyżyńska R, Reynolds AJ, Spencer N, Jouhara H (2017) Potential of pyrolysis processes in the waste management sector. Therm Sci Eng Prog 3:171–197

    Google Scholar 

  32. Onwudili J, Insura N, Williams P (2009) Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: effects of temperature and residence time. J Anal Appl Pyrolysis 86:293–303

    Google Scholar 

  33. Liu Y, Qian J, Wang J (1999) Pyrolysis of polystyrene waste in a fluidized-bed reactor to obtain styrene monomer and gasoline fraction. Fuel Process Technol 63:45–55

    Google Scholar 

  34. Abnisa F, Wan Daud WMA (2014) A review on co-pyrolysis of biomass: an optional technique to obtain a high-grade pyrolysis oil. Energy Convers Manage 87:71–85

    Google Scholar 

  35. Kaminsky W, Schlesselmann B, Simon CM (1996) Thermal degradation of mixed plastic waste to aromatics and gas. Polym Degrad Stab 53:189–197

    Google Scholar 

  36. Demirbas A (2004) Pyrolysis of municipal plastic wastes for recovery of gasoline range hydrocarbons. J Anal Appl Pyrol 72:97–102

    Google Scholar 

  37. Scheirs J (1998) Polymer recycling: science, technology and applications. Wiley, New York

    Google Scholar 

  38. Sinha V, Patel M, Patel J (2010) PET waste management by chemical recycling: a review. J Polymers Environ 18:8–25

    Google Scholar 

  39. Achilias DS, Karayannidis GP (2004) The chemical recycling of PET in the framework of sustainable development. Water Air Soil Pollut Focus 4:385–396

    Google Scholar 

  40. Bisio A, Xanthos M (1994) How to manage plastics waste. Hanser Gardner, Cincinatti

    Google Scholar 

  41. Brandrup J, Bittner M, Menges G, Michaeli W (1996) Recycling and recovery of plastics. Hanser Gardner, Cincinatti

    Google Scholar 

  42. Paszun D, Spychaj T (1997) Chemical recycling of poly(ethylene terephthalate). Ind Eng Chem Res 36:1373–1383

    Google Scholar 

  43. Oku A, Hu L, Yamada E (1997) Alkali decomposition of PET with sodium hydroxide in non-aqueous ethylene glycol: a study on recycling of terephthalic acid and ethylene glycol. J Appl Polym Sci 63:589–601

    Google Scholar 

  44. Polk MB, Leboeuf LL, Shah M, Won C-Y, Hu X, Ding W (1999) Nylon 66, nylon 46, and PET phase-transfer-catalyzed alkaline depolymerization at atmospheric pressure. Polymer Plastics Technol Eng 38(3):459–470

    Google Scholar 

  45. Kumagai S, Hirahashi S, Grause G, Kameda T, Toyoda H, Yoshioka T (2018) Alkaline hydrolysis of PVC-coated PET fibers for simultaneous recycling of PET and PVC. J Mater Cycles Waste Manag 20:439–449

    Google Scholar 

  46. Yoshioka T, Okayama N, Okuwaki A (1998) Kinetics of hydrolysis of PET powder in nitric acid by a modified shrinking-core model. Ind Eng Chem Res 37(2):336–340

    Google Scholar 

  47. Yoshioka T, Motoki T, Okuwaki A (2001) Kinetics of hydrolysis of poly (ethylene terephthalate) powder in sulfuric acid by a modified shrinking-core model. Ind Eng Chem Res 40:75–79

    Google Scholar 

  48. Karayannidis GP, Achilias DS (2007) Chemical recycling of poly(ethylene terephthalate). Macromol Mater Eng 292:128–146

    Google Scholar 

  49. Leja K, Lewandowicz G (2010) Polymer biodegradation and biodegradable polymers—a review. Polish J Environmen Stud 19:255–266

    Google Scholar 

  50. Emadian SM, Onay TT, Demirel B (2017) Biodegradation of bioplastics in natural environments. Waste Manage 59:526–536

    Google Scholar 

  51. Ronkvist AM, Xie W, Lu W, Gross RA (2009) Cutinase-catalyzed hydrolysis of poly(ethylene terephthalate). Macromolecules 42:5128–5138

    Google Scholar 

  52. Bhardwaj H, Gupta R, Tiwari A (2012) Communities of microbial enzymes associated with biodegradation of plastics. J Polym Environ 21:575–579

    Google Scholar 

  53. Arutchelvi J, Sudhakar M, Arkatkar A, Doble M, Bhaduri S, Uppara PV (2008) Biodegradation of polyethylene and polypropylene. Indian J Biotechnol 7:9–22

    Google Scholar 

  54. Tokiwa Y, Calabia BP, Ugwu CU, Aiba S (2009) Biodegradability of plastics. Int J Mol Sci 10:3722–3742

    Google Scholar 

  55. Arkatkar A, Arutchelvi J, Bhaduri S, Uppara PV, Doble M (2009) Degradation of unpretreated and thermally pretreated polypropylene by soil consortia. Int Biodeterioration Biodegradat 63:106–111

    Google Scholar 

  56. Harshvardhan K, Jha B (2013) Biodegradation of low-density polyethylene by marine bacteria from pelagic waters, Arabian Sea, India. Mar Pollut Bull 77:100–106

    Google Scholar 

  57. Hadad D, Geresh S, Sivan A (2005) Biodegradation of polyethylene by the thermophilic bacterium Brevibacillus borstelensis. J Appl Microbiol 98:1093–1100

    Google Scholar 

  58. Sulaiman S, Yamato S, Kanaya E, Kim JJ, Koga Y, Takano K, Kanaya S (2012) Isolation of a novel cutinase homolog with polyethylene terephthalate-degrading activity from leaf-branch compost by using a metagenomic approach. Appl Environ Microbiol 78(5):1556–1562

    Google Scholar 

  59. Tanasupawat S, Takehana T, Yoshida S, Hiraga K, Oda K (2016) Ideonella sakaiensis sp. nov., isolated from a microbial consortium that degrades poly(ethylene terephthalate). Int J Syst Evol Microbiol 66(8):2813–2818

    Google Scholar 

  60. Mastral FJ, Esperanza E, García P, Juste M (2002) Pyrolysis of high-density polyethylene in a fluidised bed reactor: influence of the temperature and residence time. J Anal Appl Pyrol 63(1):1–15

    Google Scholar 

  61. Fakhrhoseini SM, Dastanian M (2013) Predicting pyrolysis products of PE, PP, and PET using NRTL activity coefficient model. J Chem 1–5

  62. Chen D, Yin L, Wang H, He P (2014) Pyrolysis technologies for municipal solid waste: a review. Waste Manage 34:2466–2486

    Google Scholar 

  63. Stanmore BR (2004) The formation of dioxins in combustion systems. Combust Flame 136(3):398–427

    Google Scholar 

  64. McKay G (2002) Dioxin characterisation, formation and minimisation during municipal solid waste (MSW) incineration: review. Chem Eng J 86:343–368

    Google Scholar 

  65. Singh RK, Ruj B (2016) Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste. Fuel 174:164–171

    Google Scholar 

  66. Sharuddin SDA, Abnisa F, Daud WMAW, Aroua MK (2016) A review on pyrolysis of plastic wastes. Energy Convers Manage 115:308–326

    Google Scholar 

  67. Lopez-Urionabarrenechea A, Marco I, Caballero BM, Laresgoiti MF, Adrados A (2011) Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor. Chem Eng J 173:62–71

    Google Scholar 

  68. Oyedun AO, Gebreegziabher T, Ng DKS, Hui CW (2014) Mixed-waste pyrolysis of biomass and plastics waste—a modelling approach to reduce energy usage. Energy 75(C):127–135

    Google Scholar 

  69. Keser D (1995) Processing lines for production of polyester fiber from recovered bottles. Chem Fibers Intern 45:182–185

    Google Scholar 

  70. Rieckmann TH (1995) Recycling of PET food grade quality on a commercial scale. Chem Fibers Intern 45:182–185

    Google Scholar 

  71. Sharma ND, Shubhada (1995) Management of PET waste: process of regranulation. Asian Text J 6(95):39–52

    Google Scholar 

  72. Famechon R (1992) Separation of poly (vinyl chloride) from poly(ethylene terephthalate) by Micronyl process. Makromol Chem, Macromol Symp 57:95–102

    Google Scholar 

  73. Kao CY, Wan BZ, Cheng WH (1998) Kinetics of hydrolytic depolymerization of melt poly (ethylene terephthalate). Ind Eng Chem Res 37:1228–1234

    Google Scholar 

  74. Schmidt FR (2005) Optimization and scale up of industrial fermentation process. Appl Microbiol Biotechnol 68:425–435

    Google Scholar 

  75. Jeyakumar D, Chirsteen J, Doble M (2013) Synergistic effects of pretreatment and blending on fungi mediated biodegradation of polypropylenes. Biores Technol 148:78–85

    Google Scholar 

  76. Perugini F, Mastellone ML, Arena U (2005) A Life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes. Environ Prog 24(2):137–154

    Google Scholar 

  77. Nishijima J, Nakatani J, Yamamoto K, Nakajima F (2012) Life cycle assessment of integrated recycling schemes for plastic containers and packaging with consideration of resin composition. J Mater Cyles Waste Manage 14:52–64

    Google Scholar 

  78. Locock KES, Deane J, Kosior E, Prabaharan H, Skidmore M, Hutt OE (2017) The recycled plastics market: global analysis and trends. CSIRO, Australia

    Google Scholar 

  79. Moharir R, Kumar S (2019) Challenges associated with plastic waste disposal and allied microbial routes for its effective degradation: a comprehensive review. J Cleaner Prod 208:65–76

    Google Scholar 

  80. Grause G, Buekens A, Sakata Y, Okuwaki A, Yoshioka T (2011) Feedstock recycling of waste polymeric material. J Mater Cycles Waste Manag 13:265–282

    Google Scholar 

  81. Tullo AH (2018) Should plastics be a source of energy? Chem Eng News. 96(38) http://cen.acs.org/environment/sustainability/Should-plastics-source-energy/96/i38. Accessed 7 June 2020

  82. Al-Salem SM, Lettieri P, Baeyens J (2010) The valorization of plastic solid waste (PSW) by primary to quarternary routes: from re-use to energy and chemicals. Prog Energy Combust Sci 36(1):103–129

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Taraph Technologies, 32 Carpenter Street, Singapore, 059911, Singapore

    Alicia Lee & Mei Shan Liew

Authors
  1. Alicia Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mei Shan Liew
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mei Shan Liew.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lee, A., Liew, M.S. Tertiary recycling of plastics waste: an analysis of feedstock, chemical and biological degradation methods. J Mater Cycles Waste Manag 23, 32–43 (2021). https://doi.org/10.1007/s10163-020-01106-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10163-020-01106-2

Keywords

Search

Navigation