Skip to main content
Log in

Design of the New Control System for Linac-200

  • PHYSICS AND TECHNIQUE OF ACCELERATORS
  • Published:
Physics of Particles and Nuclei Letters Aims and scope Submit manuscript

Abstract

The construction of an experimental facility with test electron beams is under way at the Dzhelepov Laboratory of Nuclear Problems at the Joint Institute for Nuclear Research (Dubna, Russia). The facility is based on the MEA accelerator that was transferred from NIKHEF to JINR at the beginning of the 2000s. Despite the long service life of the accelerator, it is in good condition and still has a significant operation potential. The linac is being commissioned and the first 200-MeV beam has been generated. For now, the machine is controlled by a set of standalone subsystems that were created as required. Certain systems (e.g., vacuum) are controlled and monitored locally. However, a global control system is required to operate the accelerator as a user facility. The system requirements are formulated in this paper. The key issues of controlling the accelerator and its auxiliary (evacuation, cooling, etc.) systems are considered. The design of a new Tango-based control system of the Linac-200 is presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.

Similar content being viewed by others

REFERENCES

  1. M. A. Nozdrin, “A set of hardware-software control and diagnostic tools for the Linac-200 electron accelerator and the prototype of the JINR photoinjector,” Cand. Sci. (Tech. Sci.) Dissertation (Joint Inst. Nucl. Res., Dubna, 2018).

  2. Tango Controls. www.tangocontrols.org/.

  3. Community, Tango Controls. www.tangocontrols.org/ community/.

  4. N. I. Balalykin, V. P. Minashkin, M. A. Nozdrin, and G. D. Shirkov, “Control system of injector for linear electron accelerator LINAC800,” Phys. Part. Nucl. Lett. 7, 525–528 (2010).

    Article  Google Scholar 

  5. K. Huber, K.altemaschinenbau AG. www.huberonline.com/.

  6. DIALTEK. http://dialtek.org.

  7. WELTEK. http://www.weltek.ru/.

  8. G. Strangolino and F. Asnicar, V. Forchì, and C. Scafuri, “QTango: A library for easy Tango based GUIs development,” in Proceedings of the 12th International Conference on Accelerator and Large Experimental Physics Control Systems ICALEPCS2009, Oct. 12–16, 2009, Kobe, Japan (2009), pp. 865–867.

  9. N. I. Balalykin, V. P. Minashkin, M. A. Nozdrin, G. D. Shirkov, and V. Y. Schegolev, “On radiation protection at the LINAC800 linear electron accelerator,” Phys. Part. Nucl. Lett. 9, 452–455 (2012).

    Article  Google Scholar 

  10. I. I. Novikov, “Development of the Linak-200 installation management system based on the Tango-Controls SCADA system,” Bachelor’s Work (Mosc. Phys. Tech. Inst., Dubna, 2017).

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. A. Nozdrin.

Additional information

Translated by N. Semenova

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Nozdrin, M.A., Kobets, V.V., Timonin, R.V. et al. Design of the New Control System for Linac-200. Phys. Part. Nuclei Lett. 17, 600–603 (2020). https://doi.org/10.1134/S1547477120040342

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1547477120040342

Navigation