The main features of physical modeling of the delamination growth rate in layered composites in tensile loading are considered. To estimate this rate, an equation in the form of the well-known Collipriest equation, which is widely used in estimating the crack growth rate in metal materials, is proposed. The values of empirical constants of the equation for a quasi-isotropic [45/90/-45/0]S XAS/914 carbon/epoxy laminate in a tensile cyclic loading with R = 0.1 are obtained, and the S–N curve for it is constructed. A comparison of calculations with experimental data point to their acceptable accuracy.
Similar content being viewed by others
References
Composite Materials. Military Handbook 17. Materials Usage Design and Analysis, 3, - Department of Defense, Philadelphia, PA, (2002).
M. Martin, Delamination Fatigue. Fatigue in Composites, ed. by B. Harris, Woodhead Publ. Ltd and CRC Press LLC, 173-188 (2003).
R. H. Martin and G. B. Murri, “Characterization of mode I and II delamination growth and thresholds in AS4/PEEK composites,” Compos. Mater.: Testing and Design, ASTM STP 1059, 9, 251-270 (1990).
R. L. Ramkumar and J. D. Whitcomb, “Characterization of mode I and mixed-mode delamination growth in T300/5208 graphite/epoxy,” Delamination and Debonding of Materials, ASTM STP 876, 315-335 (1985).
A. Poursartip, M. F. Ashby, and P. W. R. Beaumont, “Damage accumulation during fatigue of composites,” Scripta Metallurgica, 16, 601-606 (1982).
A. Poursartip, M. F. Ashby, and P. W. R. Beaumont, “Damage accumulation during fatigue of composites,” Proc. of the 4th International Conference (ICCM-IV.), Tokyo: Japan Society for Composite Materials, I, 693-700 (1986).
A. Poursartip, M. F. Ashby, and P. W. R. Beaumont, “Damage accumulation in composites during fatigue,” Proc. of the 3rd RISØ Int. Symp. Fatigue and Creep of Composite Materials, Roskilde, Denmark, 279-284 (1986).
P. W. R. Beaumont, “Physical modeling of damage development in structural composite materials under stress,” Fatigue in Composites, ed. by B. Harris, Woodhead Publishing Ltd and CRC Press LLC, 365-412 (2003).
A. Poursartip, M. F. Ashby, and P. W. R. Beaumont, “Fatigue damage mechanics of a carbon fibre composite laminate: Part 1,” Compos. Sci. Technol., 25, 193-218 (1986).
J. E. Collipriest, “An experimentalist’s view of the surface flaw problem,” The Surface Crack Physical Problems and Computational Solutions, ASME, 43-62 (1972).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Mekhanika Kompozitnykh Materialov, Vol. 56, No. 4, pp. 781-790, July-August, 2020.
Rights and permissions
About this article
Cite this article
Strizhius, V.E. A Methodology for Estimating the Delamination Growth Rate in Layered Composites under Tensile Cyclic Loading. Mech Compos Mater 56, 533–540 (2020). https://doi.org/10.1007/s11029-020-09901-6
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-020-09901-6