Issue 36, 2020

High entropy spinel oxide nanoparticles for superior lithiation–delithiation performance

Abstract

High entropy spinel oxide (HESO) nanoparticles were synthesized via a surfactant-assisted hydrothermal method and used as a novel anode material in a lithium-ion battery. The HESO consists of non-equimolar cations of Cr, Mn, Fe, Co, and Ni dispersed in two Wyckoff sites with various valence states. Due to a strong entropy-induced phase stabilization effect of the HESO, no inactive MgO structural pillars, which are exclusively present in the reported rock salt type high entropy oxides, are required to achieve high electrode cycling stability. A superior charge–discharge capacity of 1235 mA h g−1, the highest among all known HEOs, is obtained with 90% capacity retention after 200 cycles. The unique HESO is also characterized by plenty of oxygen vacancies and three-dimensional Li+ transport pathways. Also, great high-rate performance, i.e., 500 mA h g−1 @ 2000 mA g−1, of the HESO electrode is demonstrated.

Graphical abstract: High entropy spinel oxide nanoparticles for superior lithiation–delithiation performance

Supplementary files

Article information

Article type
Paper
Submitted
21 May 2020
Accepted
07 Jul 2020
First published
09 Sep 2020
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. A, 2020,8, 18963-18973

High entropy spinel oxide nanoparticles for superior lithiation–delithiation performance

T. X. Nguyen, J. Patra, J. Chang and J. Ting, J. Mater. Chem. A, 2020, 8, 18963 DOI: 10.1039/D0TA04844E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements