Abstract
A method is proposed for straightening nonrigid parts by surface plastic deformation. This method is based on the change in the stress–strain state of the workpiece in finishing.
Similar content being viewed by others
REFERENCES
Yashcheritsyn, P.I. and Minakov, A.P., Uprochnyayushchaya obrabotka v mashinostroenii (Strengthening Technology in Machine Engineering), Minsk: Nauka i Tekhnika, 1986.
Muratkin, G.V. and Sarafanova, V.A., Finishing of soft shaft-type parts, Tekhnol. Met., 2016, no. 9, pp. 20–25.
Muratkin, G.V. and Kotova, I.V., Criteria for bending stiffness of rod-like parts, Remont, Vosstanov., Modernizatsiya, 2006, no. 2, pp. 42–45.
Donskov, A.S. and Kropotkina, E.Yu., Residual stresses and elimination of errors of a shape by irregular strengthening, Vestn. Mashinostr., 1993, no. 4, pp. 43–46.
Ovseenko, A.N., Technological residual deformation of slightly rigid parts and methods for their reduction, Vestn. Mashinostr., 1991, no. 2, pp. 58–61.
Muratkin, G.V., The influence of smelting methods on the dimensional stability of long critical-purpose shafts, Metalloobrabotka, 2014, no. 4 (82), pp. 37–42.
Zaides, S.A. and Muratkin, G.V., Uprochnenie, vosstanovlenie, pravka valov (Hardening, Reparation, and Correction of Shafts), Irkutsk: Irkutsk. Gos. Tekhn. Univ., 2005.
Muratkin, G.V., Specific technological support of high precision non-rigid critical-purposes shafts, Vestn. Mashinostr., 2016, no. 8, pp. 65–71.
Muratkin, G.V., Sarafanova, V.A., and Suvorov, M.O., Improvement of the relaxation resistance of the material by surface plastic deformation, Tekhnol. Met., 2017, no. 7, pp. 19–26.
Muratkin, G.V., Kotova, I.V., and Sintsov, A.S., RF Patent 2380212, 2010.
Muratkin, G.V. and Kotova, I.V., A mathematical model of the correction of the parts by the surface plastic deformation with preliminary bending of the billet, Metalloobrabotka, 2004, no. 6, pp. 27–31.
Mazur, V.K. and Muratkin, G.V., RF Patent 2021098, 1994.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Muratkin, G.V., Sarafanova, V.A. Straightening of Shafts by Surface Plastic Deformation with Elastic Flexure of the Workpiece. Russ. Engin. Res. 40, 637–641 (2020). https://doi.org/10.3103/S1068798X20080183
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20080183