Concentrating solar power plants use mirrors to redirect solar radiation toward receivers. Mirrors (facets) are suitably shaped to optimize the radiation capture ratio. Because deviations from ideal shape/slope degrade optical efficiency, the availability of reliable instruments for 3D shape measurement is essential. This paper deals with an innovative instrument, named VISproLF, specific for the case of facets for the primary reflector of linear Fresnel collectors. The instrument is simply composed of a LCD screen and a digital camera; to avoid artifacts, the camera must be equipped with a high quality lens and its characteristic matrix and distortion coefficients have to be accurately evaluated. The arrangement of the LCD screen and camera around the facet must follow the simple rule to view from the camera the facet surface entirely covered by the image of the screen. Then, the position and attitude of the camera (first) and LCD screen (second) are accurately evaluated by a simple procedure based on the pinhole camera model, which makes the instrument self-calibrating. The shape and slope of the facet surfaces are obtained by processing five binary images by means of a completely digital method of which a detailed description is given. In the experimental arrangement used to prepare the present paper, the slope accuracy is about 0.2 mrad. With respect to the most common instruments based on the Fringe reflection technology, VISproLF offers two great advantages: full-digital image processing and a self-calibration feature.
Skip Nav Destination
Article navigation
August 2020
Research Article|
August 20 2020
VISproLF: Self-calibrating instrument for measuring 3D shape of linear Fresnel facets
Marco Montecchi
;
Marco Montecchi
a)
Department of Energy Technologies, ENEA, S. Maria di Galeria
, Roma 00123, Italy
, http://www.enea.it/ena)Author to whom correspondence should be addressed: marco.montecchi@enea.it
Search for other works by this author on:
Giuseppe Cara;
Giuseppe Cara
Department of Energy Technologies, ENEA, S. Maria di Galeria
, Roma 00123, Italy
, http://www.enea.it/en
Search for other works by this author on:
Arcangelo Benedetti
Arcangelo Benedetti
Department of Energy Technologies, ENEA, S. Maria di Galeria
, Roma 00123, Italy
, http://www.enea.it/en
Search for other works by this author on:
a)Author to whom correspondence should be addressed: marco.montecchi@enea.it
Rev. Sci. Instrum. 91, 083109 (2020)
Article history
Received:
May 08 2020
Accepted:
August 02 2020
Citation
Marco Montecchi, Giuseppe Cara, Arcangelo Benedetti; VISproLF: Self-calibrating instrument for measuring 3D shape of linear Fresnel facets. Rev. Sci. Instrum. 1 August 2020; 91 (8): 083109. https://doi.org/10.1063/5.0013116
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Sign in via your Institution
Sign in via your InstitutionPay-Per-View Access
$40.00
Citing articles via
Method of kinetic energy reconstruction from time-of-flight mass spectra
A. Ngai, K. Dulitz, et al.
An ultracompact scanning tunneling microscope within a Φ 10 piezo tube in a 20 T superconducting magnet
Min Zhang, Jihao Wang, et al.