Elsevier

Ultramicroscopy

Volume 220, January 2021, 113098
Ultramicroscopy

A cartridge-based turning specimen holder with wireless tilt angle measurement for magnetic induction mapping in the transmission electron microscope

https://doi.org/10.1016/j.ultramic.2020.113098Get rights and content
Under a Creative Commons license
open access

Highlights

  • Development of a cartridge based turning holder.

  • Increase the reliability of magnetic induction mapping in TEM.

  • Cartridge system for wide range of samples.

  • Measurements of materials with low and high magnetic coercivity.

  • Precise holder tilt measurement using an inclinometer.

Abstract

Magnetic induction mapping in the transmission electron microscope using phase contrast techniques such as off-axis electron holography and differential phase contrast imaging often requires the separation of the magnetic contribution to the recorded signal from the electrostatic contribution. When using off-axis electron holography, one of the experimental approaches that can be used to achieve this separation is to evaluate half of the difference between phase shift images that have been recorded before and after turning the sample over. Here, we introduce a cartridge-based sample mounting system, which is based on an existing on-axis tomography specimen holder and can be used to turn a sample over inside the electron microscope, thereby avoiding the need to remove the holder from the microscope to turn the sample over manually. We present three cartridge designs, which are compatible with all pole piece designs and can be used to support conventional 3-mm-diameter sample grids, Si3N4-based membrane chips and needle-shaped specimens. We make use of a wireless inclinometer that has a precision of 0.1° to monitor the sample holder tilt angle independently of the microscope goniometer readout. We also highlight the need to remove geometrical image distortions when aligning pairs of phase shift images that have been recorded before and after turning the sample over. The capabilities of the cartridge-based specimen holder and the turning approach are demonstrated by using off-axis electron holography to record magnetic induction maps of lithographically-patterned soft magnetic Co elements, a focused ion beam milled hard magnetic Nd-Fe-B lamella and an array of four Fe3O4 nanocrystals.

Keywords

Transmission electron microscopy
Off-axis electron holography
Magnetic materials
Magnetic induction mapping
Specimen holder
Inclinometer

Cited by (0)

1

Deceased May 29, 2020.