Abstract
The LLCL filter is usually used as a switching ripple suppressor since it can attenuate switching-frequency current harmonics much better than an LCL filter using lower total inductance and capacitance. However, it is more difficult to design LLCL parameters. In addition, it has a number of initial design constraints: the fundamental reactive power, the resonant frequency fres, etc. are coupled and always contradictory, which means that designing the parameters is a Many-objective optimization problem (MaOP). The non-dominated sorting genetic algorithm-III (NSGA-III) does well in solving this kind of problem. In recent studies, the proposed methods only provide a range of parameters. Thus, obtaining certain parameters relies on experience, and using the boundary value cannot be proved optimal. However, using original NSGA-III is somewhat time-consuming for achieving specific parameters. To deal with this problem, this paper proposes a novel optimal design method for an LLCL filter based on NSGA-III with the handling of constraints. The proposed method gives a set of specific parameters and achieves a high computing efficiency. The proposed method is verified through simulations and a grid-connected inverter system based on a virtual instrument to show the effectiveness of the proposed method.
Similar content being viewed by others
References
Bhat, A.K.S.: Analysis and design of LCL-type series resonant converter. Ind. Electron. IEEE Trans. 41, 118–124 (1994)
Wu, W., He, Y., Blaabjerg, F.: An LLCL power filter for single-phase grid-tied inverter. IEEE Trans. Power Electron. 27(2), 782–789 (2012)
Deb, K., Jain, H.: An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach, part I: solving problems with box constraints. IEEE Trans. Evol. Comput. 18, 577–601 (2014)
Zhang, Z., He, C., Ye, J., Xu, J., Pan, L.: Switching ripple suppressor design of the grid-connected inverters: a perspective of many-objective optimization with constraints handling. Swarm Evol. Comput. 44, 293–303 (2019)
Yao, W., Yang, Y., Zhang, X., Blaabjerg, F., Loh, P.C.: Design and analysis of robust active damping for LCL filters using digital notch filters. IEEE Trans. Power Electron. 32(3), 2360–2375 (2016)
Jia, Y., Yan, X., Samuel, MN.: Optimal design method of LLCL filter for weak grid connected inverter. In 2017 IEEE Southern Power Electronics Conference (SPEC), pp. 1–6 (2017)
Min, H., Wang, X., Loh, P.C., Blaabjerg, F.: Design of LLCL-filter for grid-connected converter to improve stability and robustness. In Applied Power Electronics Conference & Exposition (2015)
Adak, S., Cangi, H., Yilmaz, A.: Design of an LLCL type filter for stand-alone PV systems’ harmonics. J. Energy Syst. 3(1), 50 (2019)
Alam, K.S., et al.: Optimization of LCL filter and controller parameters for grid-connected converter adopting differential evolution (DE) algorithm. In 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS). IEEE (2017)
Wu, W., Lei, L.: Optimization method of control for transformer DC bias due to multi factors based on NSGA-III. In International Conference on Intelligent Human-machine Systems & Cybernetics (2017)
Khan, B., Johnstone, M., Hanoun, S., Lim, C.P., Creighton, D., Nahavandi, S.: Improved NSGA-III using neighborhood information and scalarization. pp. 003033–003038 (2016)
Wu, W., He, Y., Tang, T., Blaabjerg, F.: A new design method for the passive damped LCL and LLCL filter-based single-phase grid-tied inverter. IEEE Trans. Ind. Electron. 60, 4339–4350 (2013)
Sosa, J.M., Escobar, G., Martinez-Rodriguez, P.R., Vazquez, G., Juarez, M.A., Diosdado, M.: Comparative evaluation of L and LCL filters in transformerless grid tied converters for active power injection. In 2014 IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC), pp. 1–6 (2014)
Channegowda, P., John, V.: Filter optimization for grid interactive voltage source inverters. IEEE Trans. Ind. Electron. 57, 4106–4114 (2010)
Phipps, J.K.: A transfer function approach to harmonic filter design. IEEE Ind. Appl. Mag. 3, 68–82 (1997)
Li, L., Guo, Y., Zhang, X.: Analysis and application of passive damping LLCL filter in active power filter. In 2015 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER), pp. 751–755 (2015)
Jain, H., Deb, K.: An evolutionary many-objective optimization algorithm using reference-point based nondominated sorting approach, part II: handling constraints and extending to an adaptive approach. IEEE Trans. Evol. Comput. 18, 602–622 (2014)
Deb, K., Pratap, A., Agarwal, S., Meyarivan, T.: A fast and elitist multi-objective genetic algorithm: NSGA-II. IEEE Trans. Evol. Comput. 6, 182–197 (2002)
Das, I., Dennis, J.E.: Normal-boundary intersection: a new method for generating the Pareto surface in nonlinear multicriteria optimization problems. SIAM J. Optim. 8, 631–657 (1996)
Wu, Z., Aldeen, M., Saha, S.: A novel optimization method for the design of LCL filters for three-phase grid-tied inverters. In 2016 IEEE Innovative Smart Grid Technologies—Asia (ISGT-Asia), pp. 214–220 (2016)
Deb, K., Beyer, H.G.: Self-adaptive genetic algorithms with simulated binary crossover. Evol Comput 9, 197–221 (2001)
Deb, K., Goyal, M.: A combined genetic adaptive search (GeneAS) for engineering design (1996)
Deb, K., Sindhya, K., Hakanen, J.: Many-objective optimization. In Decision sciences: theory and practice, pp. 145–184, CRC Press, Boca Raton (2016)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, B., Huang, S., Ye, J. et al. Optimal design method for LLCL filters based on NSGA-III. J. Power Electron. 20, 1250–1260 (2020). https://doi.org/10.1007/s43236-020-00100-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s43236-020-00100-z