Abstract
This paper describes the seismic test and numerical stress analysis of a 170 kV Gas-insulated switchgear (GIS) to see the structural and operational safety. Both the seismic test and numerical FEA (finite element analysis) are performed according to the procedure of Korean and International (IEC-62271) seismic standards. The GIS is mounted on the shaking table for a seismic test at KIMM (Korea Institute of Machinery and Material) to see the stress level and safety under earthquake loading conditions. The FEA analysis is performed to compare with the seismic test. Both the natural frequency (NF) and stress results from the numerical computation and seismic test are close and show adequate electrical and structural safety margin.
Similar content being viewed by others
References
ES-6110–0002 GIS (2012) General Technical Specifications of KEPCO
IEC 62271 (2012) INTERNATIONAL STANDARD, Edition 2.0
ANSYS Release 16.0 Documentation (2015) Theory reference: ANSYS Inc., Canonsburg, PA, USA
ASME BPVC (2010) Section VIII, Division 1; RULES FOR CONSTRUCTION OF PRESSURE VESSELS
Chopra AK (2001) Dynamics of structures: theory and applications to earthquake engineering, 2nd edn. Prentice-Hall, New York
Datta TK (2010) Seismic analysis of structures. Wiley, Singapore
Song GD, Park GY, Shin YJ (1999) Analysis techniques for design verification of GIS. Korean Inst Electr Eng 48(9):4–11
Song WP (8000A) Development of 800kV 50kA 8000A GIS. J Electr World Mon Mag 282:27–35
Lee SH, Cho SS, Kang SM, Ahn KY, Bang JD, Min KS, Choi JW, Youn SS (2001) The seismic snalysis of 72.5kV Gas Insulated Switchgear(GIS). J Electr Eng Inf Sci 18–20:762–764
Xia Y, Xu J, LI D, Shen F (2013) Analysis of seismic performance for high-voltage switchgear equipment of GIS”, 2nd International conference on electric power equipment. 1–4
Negru I, Protocsil C, Prisach Z, Gillich G (2012) On the mesh influence upon the frequency results obtained by FEM simulations. ANUL XIX, NR, 1, ISSN 1453–7397
Magryta P, Pietrykowski K, Skiba K (2017) FEM simulation research of natural frequency vibration of the crankshaft from internal combustion engine. ITM Web of conference 15
Lee J-H, Kim Y-J, Mun B-C (2019) The earthquake safety assessment of 1000 kVA cast resin transformer by finite element analysis with mesh convergence and seismic test on the large shaking table under Korean and IEEE seismic standards. J Electr Technol 14:1223–1233
Acknowledgements
This work was supported by the National Research Foundation of Korea (NRF) and the Center for Women in Science, Engineering and Technology (WISET) Grant funded by the Ministry of Science and ICT (MSIT) under the Program for Returners into R&D
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lee, JH., Kim, YJ., Park, J. et al. The Seismic Safety Assessment of 170 kV GIS (Gas-Insulated Switchgear) by the Seismic Test on the Large Shaking Table and by the Finite Element Analysis with Korean and IEC Seismic Standards. J. Electr. Eng. Technol. 15, 2675–2684 (2020). https://doi.org/10.1007/s42835-020-00503-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42835-020-00503-9