Skip to main content
Log in

Theoretical and Experimental Investigation of a Laser-Induced Photoacoustic Effect near a Hole in Internally Stressed Metal Plates

  • Published:
Physical Mesomechanics Aims and scope Submit manuscript

Abstract

This paper is an experimental and theoretical study of changes in a laser-induced photoacoustic signal near a hole in metal plates of D16 aluminum alloy. The process of photoacoustic signal generation from metals is analyzed within the classical thermoelasticity framework, with account for only the thermal effect of laser irradiation on metal lattice deformation. A comparison is made of photoacoustic experimental and theoretical results obtained for a mechanically stressed aluminum alloy plate with a hole. The effect of external mechanical stresses on the behavior of laser photoacoustic signals near the hole is studied experimentally and theoretically. It is found that the classical theory of thermoelasticity is not enough to correctly describe the stress dependence of the photoacoustic signal near a hole in aluminum alloy plates. In order for the obtained experimental and theoretical results to agree, along with the thermal effect of laser irradiation on the lattice, it is necessary to account for the additional effect of the electron gas. A calibration procedure of the laser photoacoustic signal with respect to stress is described. It is shown that internal stresses in metals can be estimated by the photoacoustic method in combination with the hole drilling method.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.

Similar content being viewed by others

REFERENCES

  1. Birger, I.A., Residual Stresses, Moscow: MASHGIZ, 1963.

  2. Akhmetzyanov, M.Kh. and Albaut, G.N., Determination of High Plastic Strains in Metal Elements by Photoelastic Coating Technique, Fiz. Mezomekh., 2004, vol. 7, no. 3, pp. 35–42.

  3. Khalili, P. and Cawley, P., The Choice of Ultrasonic Inspection Method for the Detection of Corrosion at Inaccessible Locations, NDT E Int., 2018, vol. 99, pp. 80–92.

  4. Fernandes, F.A.P., Christiansen, T.L., and Somers, G.W., On the Determination of Stress Profiles in Expanded Austenite by Grazing Incidence X-Ray Diffraction and Successive Layer Removal, Acta Mater., 2015, vol. 94, pp. 271–280.

  5. Daymond, M.R., The Determination of a Continuum Mechanics Equivalent Elastic Strain From the Analysis of Multiple Diffraction Peaks, J. Appl. Phys., 2004, vol. 96, no. 8, pp. 4263–4272.

  6. Gorkunov, E.S., Mitropolskaya, S.Yu., Osintseva, A.L., and Vichuzhanin, D.I., Magnetic Investigation of Strains and Stresses in Surface-Hardened Materials, Phys. Mesomech., 2009, vol. 12, no. 3–4, pp. 190–198.

  7. Bowden, M., Gardiner, D.J., Wood, D., Burdess, J., and Hedley, H.A., Raman and Finite-Element Analysis of a Mechanically Strained Silicon Microstructure, J. Micromech. Microeng., 2001, vol. 11, no. 1, pp. 7–12.

  8. Timilsina, S., Kim, J.S., Kim, J., and Kim, G.W., Review of State-of-the-Art Sensor Applications Using Mechanoluminescence Microparticles, Int. J. Precision Eng. Manufactur., 2016, vol. 17, no. 9, pp. 1237–1247.

  9. Lin, S.J., Samad, W.A., Khaja, A.A., and Rowlands, R.E., Hybrid Thermoelastic Stress Analysis, Exp. Mech., 2015, vol. 55, no. 4, pp. 653–665.

  10. Pisarev, V.S., Balalov, V.V., Aistov, V.S., Bondarenko, M.M., and Yustus, M.G., Reflection Hologram Interferometry Combined with Hole Drilling Technique as an Effective Tool for Residual Stress Field Investigation in Thin-Walled Structures, Opt. Lasers Eng., 2001, vol. 36, no. 6, pp. 551–597.

  11. Millon, C., Vanhoye, A., Obaton, A.F., and Penot, J.D., Development of Laser Ultrasonics Inspection for Online Monitoring of Additive Manufacturing, Welding World, 2018, vol. 62, no. 3, pp. 653–661.

  12. Cantrell, J.H., Qian, M., Ravichandran, M.V., and Knowles, K.M., Scanning Electron Acoustic Microscopy of Indentation-Induced Cracks and Residual Stresses in Ceramics, Appl. Phys. Lett., 1990, vol. 57, pp. 1870–1872.

  13. Burbelo, R., Gulyaev, A., Robur, L., Zhabitenko, M.K., Atamanenko, B.A., and Kryl, Ya.A., Photoacoustic Visualization of Residual Stress in Ceramic Material, J. Phys. C, 1994, vol. 4, pp. 7-311–7-314.

  14. Zhang, H., Gissinger, S., Weides, G., and Netzelmann, U., Detection of Surface Damage in Ceramics by Photothermal and Photoacoustic Techniques, J. Phys. C, 1994, vol. 4, pp. 7-603–7-606.

  15. Muratikov, K.L., Glazov, A.L., Rose, D.N., Dumar, J.E., and Quay, G.H., Photodeflection and Photoacoustic Microscopy of Cracks and Residual Stresses Induced by Vickers Indentation in Silicon Nitride Ceramic, Tech. Phys. Lett., 1997, vol. 23, no. 3, pp. 188–190.

  16. Muratikov, K.L., Glazov, A.L., Rose, D.N., and Dumar, J.E., Investigation of the Influence of Residual Stresses on the Thermophysical and Thermoelastic Properties of Ailicon Nitride Ceramic by Photothermal and Photoacoustic Methods, Tech. Phys. Lett., 1998, vol. 24, no. 11, pp. 846–848.

  17. Muratikov, K.L., Glazov, A.L., Rose, D.N., and Dumar, J.E., Photoacoustic Effect in Stressed Elastic Solids, J. Appl. Phys., 2000, vol. 88, no. 5, pp. 2948–2955.

  18. Muratikov, K.L. and Glazov, A.L., Theoretical and Experimental Study of Photoacoustic and Electron-Acoustic Effects in Solids with Internal Stresses, Tech. Phys., 2000, vol. 45, no. 8, pp. 1025–1031.

  19. >Muratikov, K.L., Glazov, A.L., Rose, D.N., and Dumar, J.E., Photothermal and Photoacoustic Measurement of Thermal and Thermoelastic Properties of Ceramics with Residual Stresses, High Temp. High Press., 2001, vol. 33, pp. 285–292.

  20. Muratikov, K.L., Glazov, A.L., Rose, D.N., and Dumar, J.E., Thermoelastic Photoacoustic Effect near Tips of Radial Cracks in Ceramics under External Loading, High Temp. High Press., 2002, vol. 34, pp. 585–590.

  21. Muratikov, K.L. and Glazov, A.L., Effect of an External Mechanical Load on Elastic Stresses near Radial Cracks in Al2O3–SiC–TiC Ceramics: Photoacoustic Study, Tech. Phys., 2003, vol. 48, no. 8, pp. 1028–1034.

  22. >Muratikov, K.L., Glazov, A.L., Rose, D.N., and Dumar, J.E>., Photoacoustics of the Stressed State in Solids, Rev. Sci. Instrum., 2003, vol. 74, no. 7, pp. 3531–3535.

  23. Qian, M., New Thermoelastic Technique for Detection of Residual Stress Distribution in Solids, Chin. J. Acoust., 1995, vol. 14, no. 2, pp. 97–106.

  24. Yin, Q.R., Zhang, B.Y., Yang, Y., Jiang, F.M., and Qian, M.I., Electron-Acoustic Imaging of Advanced Ceramics and Related Materials, in Progress in Natural Science, London: Taylor & Francis, 1996, vol. 6, pp. 115–118.

  25. Jiang, F., Kojima, S., Zhang, B., and Yin, Q., Some New Applications of the Scanning Electron Acoustic Microscope for Materials Evaluation, Jpn. J. Appl. Phys. B, 1998, vol. 37, part 1, no. 5, pp. 3128–3131.

  26. Glazov, A.L., Morozov, N.F., and Muratikov, K.L., The Effect of External Stresses on the Behavior of Photoacoustic Signals Inside Vickers Indenter Marks on a Steel Surface, Tech. Phys. Lett., 2016, vol. 42, no. 1, pp. 67–70.

  27. Glazov, A.L., Morozov, N.F., and Muratikov, K.L., Variations of Photoacoustic Signals within the Vickers Indent in Metals under External Stresses by the Examples of Steel and Nanocopper, Phys. Solid States, 2016, vol. 58, no. 9, pp. 1735–1743.

  28. Glazov, A.L., Morozov, N.F., and Muratikov, K.L., Photoacoustic Microscopy of Vickers Indentations in Metals with Piezoelectric Detection, Int. J. Thermophys., 2017, vol. 38, no. 7, p. 113 (13 p.).

  29. Glazov, A.L., Morozov, N.F., and Muratikov, K.L., Laser Photoacoustic Microscopy of Vickers Indentations in Titanium, Dokl. Phys., 2018, vol. 63, no. 4, pp. 155–157.

  30. Lyamshev, L.M., Radiation Acoustics, Boca Raton, Fl.: CRC Press, 2004.

  31. Nowacki, W., Dynamic Problems of Thermoelasticity, Springer Netherlands, 1975.

  32. Novozhilov, V.V., Foundations of the Nonlinear Theory of Elasticity, Mineola, N.Y.: Dover Publications, 1999.

  33. Landau, L.D. and Lifshitz, E.M., Theory of Elasticity, Oxford: Pergamon Press, 1986.

  34. Pao, Y.H., Sachse, W., and Fukuoka, H., Acoustoelasticity and Ultrasonic Measurements of Residual Stress, in Physical Acoustics, Academic Press, 1984, vol. XVII, pp. 61–143.

  35. Guz, A.N., Elastic Waves in Bodies with Initial Stresses, vol. 1, Kiev: Naukova Dumka, 1986.

  36. Muravyev, V.V., Zuev, L.B., and Komarov, K.L., Sound Velocity and Structure of Metals and Alloys, Novosibirsk: Nauka, 1996.

  37. Diaz, F.A., Patterson, E.A., and Yates, J.R., Assessment of Effective Stress Intensity Factors Using Thermoelastic Stress Analysis, J. Strain Analysis Eng. Design, 2009, vol. 44, no. 7, pp. 621–632.

  38. Robinson, A.F., Dulieu-Barton, J.M., Quinn, S., and Burguete, R.L., A Review of Residual Stress Analysis Using Thermoelastic Techniques, J. Phys. C, 2009, vol. 181, p. 012029.

  39. Wong, A.K., Jones, R., and Sparrow, J.G., Thermoelastic Constant or Thermoelastic Parameter?, J. Phys. Chem. Solids, 1987, vol. 48, no. 8, pp. 749–753.

  40. Chernyaeva, T.P., Gritsina, V.M., Mikhailov, E.A., and Ostapov, A.V., Correlation between Elasticity and Other Properties of Zirconium, Vopr. Atomn. Nauki Tekh., 2009, no. 4, pp. 206–217.

  41. Huan, H., Mandelis, A., Lin, L., and Melnikov, A., Local-Stress-Induced Thermal Conductivity Anisotropy Analysis Using Non-Destructive Photo-Thermo-Mechanical Lock-in Thermography (PTM-LIT) Imaging, NDT E Int., 2017, vol. 91, pp. 79–87.

  42. Glazov, A.L., Morozov, N.F., and Muratikov, K.L., Laser Photoacoustic Detection of Residual Stresses in Metal Plates with a Hole, Dokl. Phys., 2019, vol. 64, no. 1, pp. 20–23.

  43. Chernyshev, G.N., Popov, A.L., Kozintsev, V.M., and Ponomarev, I.I., Residual Stresses in Deformable Solids, Moscow: Fizmatlit, 1996.

  44. Folias, E.S. and Wang, J.J., On the Three-Dimensional Stress Field around a Circular Hole in a Plate of Arbitrary Thickness, Comput. Mech., 1990, vol. 6, pp. 379–391.

  45. Tzou, D.Y., Chen, J.K., and Baraun, J.E., Recent Development of Ultrafast Thermoelasticity, J. Thermal Stress., 2005, vol. 28, no. 6–7, pp. 563–594.

  46. Morozov, N.F., Muratikov, K.L., Indeitsev, D.A., Vavilov, D.S., and Semenov, B.N., A New Model of the Electron Gas Effect on the Thermoacoustics of Conductors under Laser Irradiation, Phys. Mesomech., 2019, vol. 22, no. 1, pp. 13–17. https://doi.org/10.1134/S1029959919010041

Download references

Funding

The work was carried out in the framework of RSF Project No. 15-19-00182.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. L. Glazov.

Additional information

Russian Text © The Author(s), 2019, published in Fizicheskaya Mezomekhanika, 2019, Vol. 22, No. 2, pp. 49–58.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Glazov, A.L., Morozov, N.F. & Muratikov, K.L. Theoretical and Experimental Investigation of a Laser-Induced Photoacoustic Effect near a Hole in Internally Stressed Metal Plates. Phys Mesomech 23, 213–222 (2020). https://doi.org/10.1134/S1029959920030054

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1029959920030054

Keywords

Navigation