Improving the microstructure and mechanical properties of laser cladded Ni-based alloy coatings by changing their composition: A review

References

[1] Sharma, S. P., D. K. Dwivedi, and P. K. Jain. Effect of La₂O₃ addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatings. Wear, Vol. 267, No. 5-8, 2009, pp. 853–859.10.1016/j.wear.2008.12.029Search in Google Scholar

[2] Chaliampalias, D., G. Vourlias, E. Pavlidou, S. Skolianos, K. Chris-safis, and G. Stergioudis. Comparative examination of the microstructure and high temperature oxidation performance of NiCrBSi flame sprayed and pack cementation coatings. Applied Surface Science, Vol. 255, No. 6, 2009, pp. 3605–3612.10.1016/j.apsusc.2008.10.006Search in Google Scholar

[3] Zhang, J., Y. Hu, X. J. Tan, L. Guo, and Q. M. Zhang. Microstructure and high temperature tribological behavior of laser cladding Ni60A alloys coatings on 45 steel substrate. Transactions of Nonferrous Metals Society of China, Vol. 25, No. 5, 2015, pp. 1525–1532.10.1016/S1003-6326(15)63754-2Search in Google Scholar

[4] Wang, P. Z., J. X. Qu, and H. S. Shao. Cemented carbide reinforced nickel-based alloy coating by laser cladding and the wear characteristics. Materials & Design, Vol. 17, No. 5-6, 1996, pp. 289–296.10.1016/S0261-3069(97)00025-3Search in Google Scholar

[5] Bansal, A., S. Zafar, and A. K. Sharma. Microstructure and abrasive wear performance of Ni-WC Composite Microwave Clad. Journal of Materials Engineering and Performance, Vol. 24, No. 10, 2015, pp. 1–9.10.1007/s11665-015-1657-0Search in Google Scholar

[6] Wang, S. L., Z. Y. Zhang, Y. B. Gong, and G. M. Nie. Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding. Journal of Alloys and Compounds, Vol. 728, 2017, pp. 1116–1123.10.1016/j.jallcom.2017.08.251Search in Google Scholar

[7] Quazi, M. M., M. A. Fazal, A. S. M. A. Haseeb, F. Yusof, H. H. Masjuki, and A. Arslan, Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. Journal of Rare Earths, Vol. 34, No. 6, 2016, pp. 550–564.10.1016/S1002-0721(16)60061-3Search in Google Scholar

[8] Paul, C. P., S. K. Mishra, P. Tiwari, and L. M. Kukreja. Solid-Particle Erosion Behaviour of WC/Ni Composite Clad layers with Different Contents of WC Particles. Optics & Laser Technology, Vol. 50, 2013, pp. 155–162.10.1016/j.optlastec.2013.03.002Search in Google Scholar

[9] Ortiz, A., A. García, M. Cadenas, M. R. Fernández, and J. M. Cuetos. WC particles distribution model in the cross-section of laser cladded NiCrBSi+WC coatings, for different wt% WC. Surface and Coatings Technology, Vol. 324, 2017, pp. 298–306.10.1016/j.surfcoat.2017.05.086Search in Google Scholar

[10] Ma, Q. S., Y. J. Li, J. Wang, and K. Liu. Investigation on cored-eutectic structure in Ni60/WC composite coatings fabricated by wide-band laser cladding. Journal of Alloys and Compounds, Vol. 645, 2015, pp. 151–157.10.1016/j.jallcom.2015.04.136Search in Google Scholar

[11] Tobar, M. J., C. Álvarez, J. M. Amado, G. Rodríguez, and A. Yáñez. Morphology and characterization of laser clad composite NiCrBSi-WC coatings on stainless steel. Surface and Coatings Technology, Vol. 200, No. 22-23, 2006, pp. 6313–6317.10.1016/j.surfcoat.2005.11.093Search in Google Scholar

[12] Guo, C., J. M. Chen, J. S. Zhou, J. R. Zhao, L. Q. Wang, Y. J. Yu, et al. Effects of WC-Ni content on microstructure and wear resistance of laser cladding Ni based alloys coating. Surface and Coatings Technology, Vol. 206, No. 8-9, 2012, pp. 2064–2071.10.1016/j.surfcoat.2011.06.005Search in Google Scholar

[13] Zhou, S. F., J. B. Lei, X. Q. Dai, J. B. Guo, Z. J. Gu, and H. B. Pan. A comparative study of the structure and wear resistance of NiCrBSi/50 wt.% WC composite coatings by laser cladding and laser induction hybrid cladding. International Journal of Refractory Metals and Hard Materials, Vol. 60, 2016, pp. 17–27.10.1016/j.ijrmhm.2016.06.019Search in Google Scholar

[14] Li, F.Q., X. Y. Feng, Y. B. Chen. Effect of WC content on microstructure of WC/Ni60A laser cladding layer. Chin. J. Las, Vol. 43, No. 1, 2016, pp. 0403009-1-0403009-7.10.3788/CJL201643.0403009Search in Google Scholar

[15] Zang, C. C., T. Z. Wang, Y. D. Zhang, J. H. Li, H. Zeng, and D. Q. Zhang. Microstructure and Tribological Properties of laser cladding Ni60 + 35WC-Ni coating. Rare Metals, Vol. 39, No. 5, 2019, pp. 385–391.Search in Google Scholar

[16] Matthews, S., B. James, and M. Hyland. High temperature erosion-oxidation of Cr₃C₂-NiCr thermal spray coatings under simulated turbine conditions. Surface and Coatings Technology, Vol. 70, 2013, pp. 203–211.10.1016/j.corsci.2013.01.030Search in Google Scholar

[17] Lou, D. Y., C. L. He, S. Shang, C. Liu, and Q. Cai. Microstructure and performances of graphite scattered Cr₃C₂-NiCr composites prepared by laser processing. Materials Letters, Vol. 93, 2013, pp. 304–307.10.1016/j.matlet.2012.11.113Search in Google Scholar

[18] Yu, J., L. Zhu, L. M. Luo, and J. Li. Antifriction properties of laser cladding Cr₃C₂-Ni composite coating. Hot Working Technology, Vol. 39, No. 6, 2010, pp. 86–88.Search in Google Scholar

[19] Da, W. Z., T. C. Lei, and F. J. Li. Laser cladding of stainless steel with Ni-Cr₃C₂ for improved wear performance. Wear, Vol. 251, No. 1-12, 2001, pp. 1372–1376.10.1016/S0043-1648(01)00770-0Search in Google Scholar

[20] Zhang, D. W., and T. C. Lei. The microstructure and erosive–corrosive wear performance of laser-clad Ni–Cr₃C₂ composite coating. Wear, Vol. 255, No. 1-6, 2003, pp. 129–133.10.1016/S0043-1648(03)00283-7Search in Google Scholar

[21] Zhang, D. W., and X. P. Zhang. Laser cladding of stainless steel with Ni-Cr₃C₂ and Ni-WC for improving erosive-corrosive wear performance. Surface and Coatings Technology, Vol. 190, No. 2, 2005, pp. 212–217.10.1016/j.surfcoat.2004.03.018Search in Google Scholar

[22] Wilson, J. M., and Y. C. Shin. Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC. Surface and Coatings Technology, Vol. 207, No. 9, 2017, pp. 517–522.10.1016/j.surfcoat.2012.07.058Search in Google Scholar

[23] Jiang, D., C. Hong, M. Zhong, M. Alkhayat, A. Weisheit, A. Gasser, et al. Fabrication of nano-TiCp reinforced Inconel 625 composite coatings by partial dissolution of micro-TiCp through laser cladding energy input control. Surface and Coatings Technology, Vol. 249, No. 7, 2014, pp. 125–131.10.1016/j.surfcoat.2014.03.057Search in Google Scholar

[24] Shen, M. Y., X. J. Tian, D. Liu, H. B. Tang, and X. Cheng. Microstructure and fracture behavior of TiC particles reinforced Inconel 625 composites prepared by laser additive manufacturing. Journal of Alloys and Compounds, Vol. 734, 2018, pp. 188–195.10.1016/j.jallcom.2017.10.280Search in Google Scholar

[25] Xu, X., G. Y. Mi, L. D. Xiong, P. Jiang, X. Y. Shao, and C. Wang. Morphologies, microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire. Journal of Alloys and Compounds, Vol. 740, 2018, pp. 16–27.10.1016/j.jallcom.2017.12.298Search in Google Scholar

[26] Ikeno, S., K. Furuta, and K. J. Matsuda. Effect of alumina particle size on aging in Al2O3/Al-Cu-Mg composite materials. J. JPN. I. MET, Vol. 45, No. 5, 1995, pp. 249–252.10.2464/jilm.45.249Search in Google Scholar

[27] Meng, Q. W., L. Geng, and B. Y. Zhang. Laser cladding of Ni-base composite coatings onto Ti-6Al-4V substrates with pre-placed B₄C+NiCrBSi powders. Surface and Coatings Technology, Vol. 200, No. 16-17, 2006, pp. 4923–4928.10.1016/j.surfcoat.2005.04.059Search in Google Scholar

[28] Rajab, F. H., Z. Liu, and L. Li. Production of stable superhydrophilic surfaces on 316L steel by simultaneous laser texturing and SiO₂ deposition. Applied Surface Science, Vol. 427, 2018, pp. 1135–1145.10.1016/j.apsusc.2017.08.122Search in Google Scholar

[29] Lu, W. J., D. Zhang, X. N. Zhang, R. J. Wu, T. Sakata, and H. Mori. Microstructure and tensile properties of in situ (TiB+TiC)/Ti (Tib:TiC=1:1) composites prepared by common casting technique. Materials Science and Engineering A, Vol. 311, No. 1-2, 2001, pp. 142–150.10.1016/S0921-5093(01)00910-8Search in Google Scholar

[30] Du, J. N., G. Dong, Q. L. Deng, and J. H. Yao. Microstructure and properties of laser clad NbC/Ni60 alloy composite coating. Applied Laser, No. 4, 2012, pp. 277–281.10.3788/AL20123204.277Search in Google Scholar

[31] Niu, X., M. J. Chao, W. L. Wang, B. Yuan, and E. J. Liang. In situ synthesized NbC particulate reinforced Ni-based composite coatings by laser cladding. Chinese Journal of Lasers, Vol. 33, No. 7, 2006, pp. 987–992.Search in Google Scholar

[32] Cao, Y. B., S. X. Zhi, Q. Gao, X. T. Tian, T. Geng, X. Guan, et al. Formation behavior of in-situ NbC in Fe-based laser cladding coatings. Materials Characterization, Vol. 119, 2016, pp. 159–165.10.1016/j.matchar.2016.08.005Search in Google Scholar

[33] Wu, X. L. In situ formation by laser cladding of a TiC composite coating with a gradient distribution. Surface and Coatings Technology, Vol. 115, No. 2-3, 1999, pp. 111–115.10.1016/S0257-8972(99)00045-6Search in Google Scholar

[34] Chao, M. J., W. L. Wang, E. J. Liang, and D. Ouyang. Microstructure and wear resistance of TaC reinforced Ni-based coating by laser cladding. Surface and Coatings Technology, Vol. 202, No. 10, 2008, pp. 1918–1922.10.1016/j.surfcoat.2007.08.021Search in Google Scholar

[35] Moghaddam, E. G., N. Karimzadeh, N. Varahram, and P. Davami. Impact-abrasion wear characteristics of in-situ VC-reinforced austenitic steel matrix composite. Materials Science and Engineering A, Vol. 585, No. 22, 2013, pp. 422–429.10.1016/j.msea.2013.07.082Search in Google Scholar

[36] Zhao, G. L., C. Z. Huang, H. L. Liu, B. Zou, H. T. Zhu, and J. Wang. Preparation of in-situ growth TaC whiskers toughening Al₂O₃ ceramic matrix composite. International Journal of Refractory Metals & Hard Materials, Vol. 36, 2013, pp. 122–125.10.1016/j.ijrmhm.2012.08.003Search in Google Scholar

[37] Wang, Z. T., X. H. Zhou, and G. G. Zhao. Microstructure and formation mechanism of in-situ TiC-TiB₂/Fe composite coating. T. Nonferr. Metal. Soc, Vol. 18, No. 4, 2008, pp. 831–835.10.1016/S1003-6326(08)60144-2Search in Google Scholar

[38] Li, M., J. Huang, Y. Y. Zhu, and Z. G. Li. Effect of heat input on the microstructure of in-situ synthesized TiN-TiB/Ti based composite coating by laser cladding. Surface and Coatings Technology, Vol. 206, No. 19-20, 2012, pp. 4021–4026.10.1016/j.surfcoat.2012.03.082Search in Google Scholar

[39] Liu, K., Y. J. Li, J. Wang, and Q. S. Ma. Effect of high dilution on the in situ synthesis of Ni-Zr/Zr-Si(B, C) reinforced composite coating on zirconium alloy substrate by laser cladding. Materials & Design, Vol. 87, 2015, pp. 66–74.10.1016/j.matdes.2015.07.158Search in Google Scholar

[40] Wu, W. T., Y. Zhang, and B. H. Song. Effect of niobium on Microstructure and wear resistance of Ni60 laser cladding layer. Journal of Shijiazhuang Tiedao University, Vol. 30, No. 2, 2017, pp. 105-110.Search in Google Scholar

[41] Cheng, Y., G. Dong, and G. X. Chen. Effect of niobium on microstructure and microhardness of laser clad nickel based alloy. Materials for Mechanical Engineering, Vol. 38, No. 9, 2014, pp. 24–28.Search in Google Scholar

[42] Hu, Y. L., X. Lin, X. B. Yu, J. J. Xu, M. Lei, and W. D. Huang. Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing. Journal of Alloys and Compounds, Vol. 711, 2017, pp. 267–277.10.1016/j.jallcom.2017.03.355Search in Google Scholar

[43] Ma, Q. S., Y. J. Li, and J. Wang. Effects of Ti addition on microstructure homogenization and wear resistance of wide-band laser clad Ni60/WC composite coatings. International Journal of Refractory Metals & Hard Materials, Vol. 64, 2017, pp. 225–233.10.1016/j.ijrmhm.2016.11.002Search in Google Scholar

[44] Yang, L. Q., Z. Y. Li, Y. Q. Zhang, S. Z. Wei, and F. Q. Liu. Al-TiC in situ composite coating fabricated by low power pulsed laser cladding on AZ91D magnesium alloy. Applied Surface Science, Vol. 435, 2018, pp. 1187–1198.10.1016/j.apsusc.2017.11.240Search in Google Scholar

[45] Xiang, H., Y. Xu, L. Zhang, and L. Cheng. Synthesis and microstructure of tantalum carbide and carbon composite by liquid precursor route. Scripta Materialia, Vol. 55, No. 4, 2006, pp. 339–342.10.1016/j.scriptamat.2006.04.036Search in Google Scholar

[46] Yu, T., Q. L. Deng, G. Dong, and J. G. Yang. Effects of Ta on microstructure and microhardness of Ni based laser clad coating. Applied Surface Science, Vol. 257, No. 11, 2011, pp. 5098–5103.10.1016/j.apsusc.2011.01.027Search in Google Scholar

[47] Zhao, N., L. Tao, H. Guo, and M. Q. Zhang. Microstructure and wear resistance of laser cladded Ni-based coatings with nanometer La₂O₃ addition. Rare Metal Materials and Engineering, Vol. 46, No. 8, 2017, pp. 2092–2096.10.1016/S1875-5372(17)30185-6Search in Google Scholar

[48] Wang, C. L., Y. Gao, Z. C. Zeng, and Y. K. Fu. Effect of rare-earth on friction and wear properties of laser cladding Ni-based coatings on 6063Al. Journal of Alloys and Compounds, Vol. 727, 2017, pp. 278–285.10.1016/j.jallcom.2017.08.101Search in Google Scholar