Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter August 10, 2020

An improved technique for low-loss material complex permittivity and permeability determination from transmission-only measurements

  • Chuang Yang , Jian Wang and Feng Feng ORCID logo EMAIL logo
From the journal Frequenz

Abstract

In this paper, a novel technique based on transmission-only measurements is proposed to determine complex permittivity and permeability of low-loss materials. The proposed method removes the influences of the sample thickness and avoids the resonances in the extracted parameters. Both the experiment and simulation are applied to present the advantages of the proposed method. Compared with the well-known Nicolson–Ross–Weir (NRW) method, the proposed method shows a good performance in resonance avoidance. Compared with the conventional method based on the transmission-only measurements, the proposed method shows a good performance in accuracy.


Corresponding author: Feng Feng, Department of Electronics, Carleton University, Ottawa, Ontario, K1S5B6, Canada, E-mail:

  1. Author contribution: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: None delared.

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

[1] C. Yang and H. Huang, “Determination of complex permittivity of low-loss materials from reference-plane invariant transmission/reflection measurements,” IEEE Access, vol. 7, pp. 131865–131872, Sep. 2019, https://doi.org/10.1109/access.2019.2940723.Search in Google Scholar

[2] J. Ma, “The challenging of radio access technology for 5G,” in Proc. IEEE Int. Wireless Symp., Guangzhou, China, May 2019, pp. 1–4.10.1109/IEEE-IWS.2019.8803884Search in Google Scholar

[3] W. B. Weir, “Automatic measurements of complex dielectric constant and permeability at microwave frequencies,” Proc. IEEE, vol. 62, no. 1, pp. 33–36, Jan. 1974, https://doi.org/10.1109/proc.1974.9382.Search in Google Scholar

[4] B. Ravelo, A. Thakur, A. Saini, and P. Thakur, “Microstrip dielectric substrate material characterization with temperature effect,” ACES J., vol. 30, no. 12, pp. 1322–1328, Dec. 2015.Search in Google Scholar

[5] C. Yang, “A position-independent reflection-only method for complex permittivity and permeability determination with one sample,” Frequenz, vol. 742020, no. 3–4, pp. 163–167, Mar, https://doi.org/10.1515/freq-2019-0062.Search in Google Scholar

[6] J. Baker-Jarvis, M. D. Janezic, J. H. Grosvenor, and R. G. Geyer, Transmission/reflection and short-circuit line methods for measuring permittivity and permeability, Boulder, CO, USA, NIST, Tech. Note 1355-R, 1993.Search in Google Scholar

[7] L. Duvillaret, F. Garet, and J.-L. Coutaz, “A reliable method for extraction of material parameters in terahertz time-domain spectroscopy,” IEEE J. Sel. Top. Quant. Electron., vol. 2, no. 3, pp. 739–746, Sep. 1996, https://doi.org/10.1109/2944.571775.Search in Google Scholar

[8] A. Kazemipour, M. Hudlička, S. K. Yee, et al., “Design and calibration of a compact quasi-optical system for material characterization in millimeter/submillimeter wave domain,” IEEE Trans. Instrum. Meas., vol. 64, no. 6, pp. 1438–1445, Jun. 2015 https://doi.org/10.1109/tim.2014.2376115.Search in Google Scholar

[9] C. Yang and J.-G. Ma, “Direct extraction of complex permittivity and permeability of materials on a known-substrate from transmission/reflection measurements,” IEEE Microw. Wireless Compon. Lett., vol. 29, no. 10, pp. 639–635, Aug. 2019, https://doi.org/10.1109/lmwc.2019.2933350.Search in Google Scholar

[10] C. Yang, K. Ma, and J.-G. Ma, “A noniterative and efficient technique to extract complex permittivity of low-loss dielectric materials at terahertz frequencies,” IEEE Antennas Wireless Propag. Lett., vol. 18, no. 10, pp. 1971–1975, Aug. 2019, https://doi.org/10.1109/lawp.2019.2935170.Search in Google Scholar

[11] U. C. Hasar, “Determination of complex permittivity of low-loss samples from position-invariant transmission and short-reflection measurements,” IEEE Trans. Microw. Theory Tech., vol. 66, no. 2, pp. 1090–1098, Feb. 2018, https://doi.org/10.1109/tmtt.2017.2772864.Search in Google Scholar

[12] J. Sun, A. Dawood, W. J. Otter, N. M. Ridler, and S. Lucyszyn, “Microwave characterization of low-loss FDM 3-D printed ABS with dielectric-filled metal-pipe rectangular waveguide spectroscopy,” IEEE Access, vol. 7, pp. 95455–95486, Jul. 2019, https://doi.org/10.1109/access.2019.2926717.Search in Google Scholar

Received: 2019-11-24
Accepted: 2020-07-10
Published Online: 2020-08-10
Published in Print: 2020-11-26

© 2020 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 26.4.2024 from https://www.degruyter.com/document/doi/10.1515/freq-2019-0197/html
Scroll to top button