Abstract
This paper proposes using a modified adhesive based on powder urea-formaldehyde polymer for gluing plywood and facing it with a microthin veneer. It was found that application of such adhesive eliminates the possibility of the adhesive seeping through the microthin veneer, while ensuring high bonding strength and the required decorative properties. The mathematical dependence of the effect of the main technological factors on the shear strength along the adhesive layer was obtained, which made it possible to recommend rational modes for gluing plywood and facing it with a microthin veneer.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
A. P. Shalashov, “The state and prospects for development of the market of wood boards in Russia,” in The State and Prospects for Development of the Production of Wood-Based Panels: Proc. Sci.-Pract. Conf. (VNIIDREV, Balabanovo, 2018), pp. 3–11.
G. S. Varankina and A. N. Chubinskii, The Formation of Low Toxic Glued Wood Materials (Khimizdat, St. Petersburg, 2014) [in Russian].
E. V. Kantieva and L. V. Ponomarenko, “Features of facing of panel parts with fine-line veneer,” Lesotekh. Zh. 5 (4), 138–144 (2015).
G. V. Fominov, “The current state of the issue of facing with planed veneer,” Vestn. Mosk. Gos. Univ. Lesa, Lesn. Vestn., No. 6, 129–133 (2007).
N. O. Begunkova, S. P. Isaev, and O. I. Begunkov, “Effect of morphometric characteristics of a round assortment and conditions of its cutting on the output of planed veneer,” Sist., Metody, Tekhnol., No. 2, pp. 145–153 (2016).
A. A. Filonov and Yu. S. Zhuravleva, “Facing wood slabs with thin veneer,” Derevoobrab. Prom-st., No. 3, 16–19 (2010).
N. O. Begunkova, “The formation of surface quality of planed veneer,” in Woodworking: Technology, Equipment, and Management of the 21st Century: Proc. VII International Eurasian Symposium (Ural. Gos. Lesotekh. Univ., Yekaterinburg, 2012), pp. 59–64.
A. M. Ivanov, D. S. Rusakov, and G. P. Plotnikova, “Facing plywood with the use of powdered adhesives based on urea-formaldehyde resins,” Sist., Metody, Tekhnol., No. 2. 94–100 (2017).
D. S. Rusakov, G. S. Varankina, A. N. Chubinskii, A. M. Ivanov, and K. G. Brutyan, RU Patent No. 2616924 (2017).
D. S. Rusakov, A. N. Chubinskii, L. N. Rusakova, and G. S. Varankina, “Investigation of the properties of modified phenol-formaldehyde adhesives,” Izv. S.-Peterb. Lesotekh. Akad., No. 222, 155–174 (2018).
E. G. Sokolova, “Improving the operational properties and technology of plywood with increased water resistance, made using melamine urea formaldehyde resins,” Izv. S.-Peterb. Lesotekh. Akad., No. 221, 282–293 (2017).
E. G. Sokolova, “Modification of phenol-formaldehyde resin with melamine carbamide-formaldehyde resin for gluing plywood,” Sist., Metody, Tekhnol., No. 2, 111–115 (2018).
E. G. Sokolova, “Substantiation of veneer bonding modes in the production of plywood made using modified phenol-formaldehyde resin,” Sist., Metody, Tekhnol., No. 4, 125–131 (2018).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by K. Lazarev
Rights and permissions
About this article
Cite this article
Rusakov, D.S., Ivanov, A.M., Varankina, G.S. et al. An Investigation of Gluing and Facing Plywood with a Microthin Veneer Using Powder Adhesive. Polym. Sci. Ser. D 13, 282–285 (2020). https://doi.org/10.1134/S1995421220030144
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421220030144