Next Article in Journal
Variable Angle Spectroscopic Ellipsometry Characterization of Reduced Graphene Oxide Stabilized with Poly(Sodium 4-Styrenesulfonate)
Next Article in Special Issue
Surface Modification of 316L SS Implants by Applying Bioglass/Gelatin/Polycaprolactone Composite Coatings for Biomedical Applications
Previous Article in Journal
Effects of Substrate Rotation Speed on Structure and Adhesion Properties of CrN/CrAlSiN Multilayer Coatings Prepared Using High-Power Impulse Magnetron Sputtering
Previous Article in Special Issue
Hydrothermal Synthesis of Cobalt Ruthenium Sulfides as Promising Pseudocapacitor Electrode Materials
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Coatings
Volume 10
Issue 8
10.3390/coatings10080741
coatings-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Preparation and Characterization of Self-Dispersing Phthalocyanine Blue 15:4 Pigment for Dyeing of Wool Textiles

by
Lun Nie
,
Guangtao Chang
* and
Ruoxin Li
*
College of Textile and Clothing Engineering, Soochow University, 199 Renai Road, Suzhou 215123, China
*
Authors to whom correspondence should be addressed.
Coatings 2020, 10(8), 741; https://doi.org/10.3390/coatings10080741
Submission received: 3 July 2020 / Revised: 21 July 2020 / Accepted: 26 July 2020 / Published: 29 July 2020
(This article belongs to the Special Issue Synthesis and Characterization of Nanostructures and Nanomaterials)
Browse Figures
Versions Notes

Abstract

:
A self-dispersing pigment was produced by a diazonium coupling reaction; the pigment reacted with aromatic diazonium salts which were generated by the reaction of p-aminobenzene sulfonic acid and sodium nitrite. The surface of the pigment particles was negatively charged due to sulfonic acid groups on the pigment surface. The pigment particle size and zeta potential were, respectively, 134.5 nm and −45.4 mV at neutral pH. The wool surface was positively charged by adjusting the pH; then the anionic self-dispersing pigment dyed the cationic wool. The results show that self-dispersing pigment can adhere well without a binder, and that the K/S value is closely related to pH, dyeing time, and the amount of pigment. The color fastness of the wool was good and the light fastness of the wool was grade 5, which is better than acid dyes. Self-dispersing pigments are potential candidates for dyeing high-weather-resistance textiles.

1. Introduction

Traditionally, wool colorants are usually acid dyes, most of which contain sulfonate groups and are soluble in water [1,2,3]. Wool is mainly composed of protein, and has many carboxyl and amino groups. The isoelectric point of wool is about 4.2 to 4.8. The wool surface will remain neutral when the pH is at isoelectric point. When the pH is lower than the isoelectric point, the amino groups on the wool surface are protonated and the wool surface becomes positive. When the pH is higher than the isoelectric point, the carboxyl groups on the wool surface are ionized and the wool surface is negatively charged. Acid dyes bind to wool fabrics by ionic bonds under acidic conditions [4,5,6,7]. Dyeing wool fabrics is a solution-based process that consumes an excessive amount of water and energy, and pollutes the environment [8,9,10,11,12,13]. Azo dyes in acid dyes are banned because of the risk of carcinogenesis [14,15]. In recent years, new colorants and dyeing methods have been developed [16,17].
Pigments have strong coloring power, bright color, complete color spectrum, acid/alkali resistance, good weather resistance, and are widely used in textile, paint, ink, plastic, rubber, and other industries [18,19,20,21,22,23,24]. Pigments are widely used in textile printing and coating dyeing because they are suitable for coloring different fibers and because they are eco-friendly. Pigment dyeing connects the pigment with fabric mostly by latex binders [25,26,27]. The fabric dyeing performance obviously depends on the quality of pigment dispersion, mainly the degree of dispersion and stability [28,29]. In recent years, the development of pigment products with high dispersion and stability has been the subject of a number of studies mainly involved in treating pigment with dispersant to reduce particle size [30,31,32]; for example, superfine pigments with an average particle size of 100–500 nm. Fabrics dyed with pigments having smaller particle size can achieve higher color intensity and soft-touch performance [33]. For example, Wang researched the dyeing of wool, acrylic, and other fabrics with ultra-fine pigments [34,35]. In addition, Xu has made good progress in the research of electrochemical dyeing technology for pigments [36].
In recent years, applying pigment to fabric dyeing in a water bath has been a hot research topic [37,38]. Water-based self-dispersing pigment is produced by surfaces modified with water-soluble groups [39,40,41,42]. The particle size of water-based self-dispersing pigment is smaller than that of superfine pigment, and can reach nanometer scale [43]. Dyes are easier to use because they do not need to be treated with dispersants. High-performance, water-based, self-dispersing pigments for dyeing fabrics have the advantage of good weather resistance, high fastness, softness and comfort, simple process, less waste water, and environmental safety. In 1996, Cabot Company applied water-based self-dispersing pigments modified by sulfonic acid diazotization to the inkjet industry [44]. In 2014, Stanovich treated the pigment with five-membered heterocycle diazo to produce a pigment with smaller particle size and better dispersion [45]. At present, there are few research groups, and a small number of innovative technologies on water-based self-dispersing pigments are under investigation.
Here we first studied fabric dyeing with self-dispersed pigments without binder, and compared them with acid dyes. The phthalein cyanine pigment was grafted with a hydrophilic sulfonic group, and the pigment surface was modified with negative charges. Water-based self-dispersing pigment was stabilized by electrostatic repulsion, and reaction impurities were removed by dialysis. We researched the effects of wool fabric dyeing with different dye bath pH, dyeing times, and pigment dosage on dyeing absorbance, K/S value, and color fastness. We compared the differences of dyeing fastness and coloring agent distribution between water-based self-dispersing pigment and acid dye, and found there are some merits in the self-dispersing pigment dyeing method, detailed in the following sections.

2. Materials and Methods

2.1. Materials

Wool fabric (plain weave, 125 g/m2) was supplied by Shanghai Textile Industry Institute of Technical Supervision, Shanghai, China. p-Aminobenzene sulfonic acid was supplied by Shanghai Macklin Biochemical Ltd., Shanghai, China. Sodium nitrite was analytically pure and obtained from China Sun Specialty Products Company, Changshu, China. Pigment Blue 15:4 (7101F) was supplied by BASF. Acid Blue 93 was supplied by Shandong Usolf Chemical Technology Co., Ltd., Linyi, China. Hydrochloric acid (analytically pure) was obtained from China Sun Specialty Products Company, Changshu, China. Citric acid and disodium hydrogen phosphate were analytically pure and obtained from Sinopharm Chemical Reagent Co., Ltd., Shanghai, China.

2.2. Preparation of Self-Dispersing Pigment

First, 260 g water and 6.76 g p-aminobenzene sulfonic acid were added to the mill, the mixture was dispersed for 5 min with 2000 revolutions per minute (RPM). Then, 0.3 g hydrochloric acid was added to adjust the solution pH to below 2, and 20 g water-solution with 2.73 g sodium nitrite was added to the mixture. Subsequently, 30 g Pigment Blue was added. The mixture was dispersed for 20 min with 4000 RPM at 20 °C. Next, 1200 g of zirconium bead was added to the mill to grind for 1 h. The reaction scheme is shown in Figure 1. Lastly, the impurity was removed by dialysis over 3 days, and 2% aqueous self-dispersing pigment was obtained.

2.3. Dyeing Procedure

Wool fiber dyed with water-based self-dispersing pigments was treated at a liquor ratio of 1:50; the method is shown in Figure 2. As for dyeing with Acid Blue 93, samples were dyed using dyes instead of pigment under the same heating process shown in Figure 2. The pH was adjusted by buffer solution composed of Na2HPO4 and citric acid.

2.4. Testing and Measurements

2.4.1. Particle Size, PDI, and Zeta Potential

The particle diameter, and PDI, and the zeta potential of pigment dispersions were determined by dynamic light scattering using a Zetasizer Nano ZS Nano-Zeta potential analyzer (Malvern Panalytical Co., Malvern, UK). The dispersions were diluted before measurement.

2.4.2. Absorption of Pigment and Pigment Uptake

The absorbance was measured at a selected time t on a SPECORD S600 spectrophotometer (Analytik Jena AG, Jena, Germany) at the wavelength of maximum absorption (619 nm) of the pigment. The pigment uptake was calculated according to the following equation:
Et = (1 − D/D0) × 100%
where Et is pigment uptake at time t, D is the absorbance of the dye bath at time t, and D0 is the absorbance of the original dye bath.

2.4.3. X-ray Photoelectron Spectroscopy (XPS) Measurements

XPS measurements were taken in a Thermo Kalpha (Thermo Fisher Scientific Inc., Waltham, MA, USA) using a monochromatic Al Kα X-ray source to analyze the compositions of samples.

2.4.4. Color Strength

The K/S values indicate the depth of shade reflected from the dyed fabric surface. K/S = (1 − R2)/2R. R is the reflectance of the dyed fabric at the maximum absorption wavelength, and K/S is the ratio of the absorption coefficient (K) and the scattering coefficient (S). The larger the K/S value, the darker the color—that is, the higher the concentration of colored substances, the smaller the K/S value and the lighter the color. The measurement was carried out using a Hunterlab Ultrascan PRO reflectance spectrophotometer (HunterLab. Co., Ltd, Reston, VA, USA) under illuminant D65 using the 10° standard observer. Color strength (K/S) was calculated using the Kubelka–Munk equation.

2.4.5. Rubbing Fastness

To evaluate the rubbing fastness of dyed wool fabrics, samples were tested by a Y571B rubbing fastness tester (Nantong Hongda Experiment Instruments Co., Ltd., Nantong, China) using both dry and wet processes. The grade of rubbing fastness was determined according to the standard ISO 105-X12:2001.

2.4.6. Light Fastness

Light fastness was analyzed by exposing the dyed wool yarns for 40 h in a light fastness tester ATLAS-150S (ATLAS Co., Ltd., Essen, Germany). Light fastness was determined according to the standard ISO 105-B02:2000.

2.4.7. Dye Permeability

An SEM S-4800 (Hitachi, Tokyo, Japan) was used to observe the dyeing and morphology of the fabric at an acceleration voltage of 3 kV.

3. Results and Discussion

3.1. Particle Size, PDI, and Zeta Potential

The particle size has an effect on the permeability, coating, and color fastness of the pigment. The polydispersity index (PDI) provides information about the width of particle size distribution and affects the saturation of colored fabrics. Zeta potential influences the stability of pigment dispersion. Table 1 shows the results of water-based self-dispersing pigment modified by p-aminobenzene sulfonic acid. Here we combined physical sand milling technology and chemical modification technology. We successfully prepared the water-based self-dispersing nanoparticles at a size of 134.5 nm, which is significantly smaller than the traditional dispersing particle size of 0.5–1.5 um [34]. Data are summarized in Table 1.
The PDI of 0.216 shows that the pigment was uniform enough for dyeing. The self-dispersing pigment presented a zeta potential of −45.4 mV at neutral pH, indicating that pigment particles carried plenty of negative charge. Through a diazotization reaction, the hydrophilic sulfonic acid group was grafted to the pigment surface, so that the pigment surface had a large amount of negative charge. Electrostatic repulsion had the effect of forming a stable, highly dispersed pigment in the water. After the removal of impurities by dialysis, dyeing pastes were obtained.

3.2. UV–Vis Absorption

We knew that if the color of the modified pigment changed greatly, it would cause a lot of trouble for later application, modification, and development of other pigments. The objective was for the color to remain the same, and to achieve the maximum retention of the optical properties before and after modification. Therefore, in order to verify whether the color of the modified pigment was changed, an absorption vs. wavelength curve was obtained with a UV–visible spectrophotometer, as shown in Figure 3. It can be seen from the figure that the curve was basically the same, and that the modified pigment had the same color as the unmodified pigment.

3.3. XPS

The prepared water-based self-dispersing pigment (modified pigment) and unmodified pigment were dried to a powder at 80 °C for one hour, and samples were measured using a monochromatic Al Kα X-ray source to analyze the compositions. Compared with the physical absorption of dispersants used in the traditional method of dispersing pigments, the modification method in this paper was a chemical modification with the addition of a sulfonic acid group, so the chemical element composition of pigments was bound to change. Changes to oxygen and sulfur content have important characterization significance. As can be seen from Table 2, the content of oxygen increased from 3.07% to 10.19%, and the content of sulfur increased from 0.21% to 1.74%. The increase of oxygen and sulfur showed that the sulfonic acid group reacted to the surface of the pigment. Combined with the above comprehensive verification, it can be concluded that the water-based self-dispersing pigments were successfully prepared.

3.4. Effect of Dyebath pH on Uptake

The most critical factor influencing wool dyeing is pH, because wool has an isoelectric point [34]. This is the key variable regarding exploration of the impact of pH on wool dyeing, and this article explores changes in pH from 2.5 to 8, at a dyeing time of 60 min, and with 2% owf modified pigment. Figure 4 shows that with the increase of pH, the uptake of pigments decreased. The highest uptake was 91.2% with pH 2.5, so we can say that the rate of dyeing increased as pH decreased. Dyeing under the condition of acid or alkali will produce larger damage to fabric, so a pH of 2.5 should be chosen to reach a better result.

3.5. Effect of Dyeing Time on Uptake

Higher uptakes and shorter dyeing times have a great impact on actual production. If uptakes can reach 100% in a short period of time, the treatment of wastewater from dyeing and finishing processes will be greatly improved and will have a measurable impact on the goal of water conservation. Therefore, we studied the change of uptake over time at pH 2.5 and with 2% owf modified pigment, as shown in Figure 5. We can see that the uptake increased with the increase of dyeing time. When the dyeing time was 100 min, the dyeing rate reached 98%, or close to 100%. So, the dyeing method is feasible.

3.6. Effect of Dyeing Time on K/S Value

K/S value is often used to indicate the apparent color depth of dyed fabrics. When the value is higher, the dyeing color is better. We studied the change of K/S over time at pH 2.5 and with 2% owf modified pigment. As shown in Figure 6, it can be seen that the K/S value increased with the extension of dyeing time. At 80 min, the K/S value of the fabric reached 13.19, indicating that the fabric was deeply dyed [34,35,36]. Considering the influence of too-long dyeing times on production and processing, the dyeing time of 80 min was able to achieve a better effect.

3.7. Effect of Pigment Amount on K/S Value

The amount of pigment can affect the contact probability between pigment and fabric, as well as the complete dyeing of fabric. Therefore, at pH 2.5 and a dyeing time 60 min, we analyzed the change of K/S value with the amount of pigment. As shown in Figure 7, the K/S value was maximum at 1% owf. When the amount of pigment was increased, the K/S decreased and did not have the expected effect. Considering the influence of dyeing fastness on color fading in later tests, the data from the experiment and the color depth of dyeing liquid after dyeing were used to comprehensively determine that the pigment dosage at 2% owf could achieve a better effect.

3.8. Comparison of Distribution on Dyed Fabric

In order to compare the chromaticity distribution of modified pigment and dye on dyed wool yarn, the dyed fabric, with modified pigment and Acid Blue 93, was sliced and observed by SEM. The result is shown in Figure 8. The modified pigment was obviously present on the surface of the fiber, and there was a large number of concentrated large particles deposited on the fiber, indicating that the pigment could be properly dyed on the fiber [38]. The Acid Blue 93 dyeing fiber had no obvious large particle deposition on the surface, and the wool scale layer could also be clearly seen, indicating that more dye had entered into the fiber, so the permeability was better. The reason is that the particle size of the modified pigment was larger than the dye.

3.9. Comparison of Fastness

It can be seen from Figure 9 and Table 3 that the color of wool fabrics dyed by modified pigments showed little change, while the color of wool fabrics dyed by acid dyes showed great change. So, we can conclude that the color fastness of the modified-pigment-dyed fabric was better than that of the fabric dyed with the acid dye [34,35,36,38]. The chemical bond energy of pigments is high and the resistance to light is strong, which is the reason for the high light fastness. However, when dyes are chosen for colorants, the light damage to them is greater, and the fastness to light is even worse. The two colorants have no difference in rubbing fastness.

4. Conclusions

By physical grinding and chemical modification, the hydrophilic sulfonic acid group on p-aminobenzene sulfonic acid was successfully grafted through a diazotization reaction under the action of high-speed grinding, and a water-based self-dispersing pigment with a particle size of 134.5 nm, a PDI of 0.216, and a zeta potential −45.4 mV was successfully prepared. The uptake of dyed wool fabric reached 90% with a pH of 2.5, a dyeing temperature of 90 °C, a dyeing time of 80 min, and a pigment dosage of 2% owf. The K/S value reached 13.19, resulting in a better dyeing effect. When the dyeing time was extended to 100 min, the uptake reached 98%, close to 100%. At the same time, the evenness of dyeing was good and the weather resistance was excellent. Dry-rubbing fastness and wet-rubbing fastness were nearly the same compared to acid dyes used for dying textiles. The self-dispersed pigment dying method may be a useful tool for producing high-grade light-fast fabrics.

Author Contributions

Conceptualization, L.N. and R.L.; Funding acquisition, R.L. and G.C.; Investigation, L.N., R.L., and G.C.; Project administration, R.L. and G.C.; Supervision, R.L. and G.C.; Visualization, L.N.; Writing—original draft, L.N.; Writing—review and editing, R.L. and G.C. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the Research Funding of Soochow University (Q411500218) and Soochow University-Suzhou Central Asia Ink Co., Ltd. Co-innovation Center Co-Construction Agreement (P111500219).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Burkinshaw, S.M.; Kumar, N. The mordant dyeing of wool using tannic acid and FeSO4, Part 1: Initial findings. Dyes Pigment. 2009, 80, 53–60. [Google Scholar] [CrossRef]
  2. Fakin, D.; Ojstrsek, A.; Benkovic, S.C. The impact of corona modified fibres’ chemical changes on wool dyeing. J. Mater. Process. Technol. 2009, 209, 584–589. [Google Scholar] [CrossRef]
  3. Zhang, Y.Z.; Hou, W.F.; Tan, Y.P. Structure and dyeing properties of some anthraquinone violet acid dyes. Dyes Pigment. 1997, 34, 25–35. [Google Scholar] [CrossRef]
  4. Wang, H.Y.; Wang, G.W.; Zheng, C.L.; Zhou, T.J.; Sun, J. Synthesis of acid dyes containing polyetheramine moieties and their low-temperature dyeing properties on wool fiber. J. Appl. Polym. Sci. 2018, 135, 9. [Google Scholar] [CrossRef]
  5. Cai, Z.S.; Qiu, Y.P. Dyeing properties of wool fabrics treated with atmospheric pressure plasmas. J. Appl. Polym. Sci. 2008, 109, 1257–1261. [Google Scholar] [CrossRef]
  6. Abdelrahman, M.S.; Nassar, S.H.; Mashaly, H.; Mahmoud, S.; Maamoun, D.; El-Sakhawy, M.; Khattab, T.A.; Kamel, S. Studies of Polylactic Acid and Metal Oxide Nanoparticles-Based Composites for Multifunctional Textile Prints. Coatings 2020, 10, 58. [Google Scholar] [CrossRef] [Green Version]
  7. Assefi Pour, R.; He, J. Surface Functionalization of Wool via Microbial-Transglutaminase as Bio-Mordant to Improve Dyeability with Madder in the Presence of Alum. Coatings 2020, 10, 78. [Google Scholar] [CrossRef] [Green Version]
  8. Shams-Nateri, A. Reusing wastewater of madder natural dye for wool dyeing. J. Clean. Prod. 2011, 19, 775–781. [Google Scholar] [CrossRef]
  9. Ozturk, E.; Karaboyaci, M.; Yetis, U.; Yigit, N.O.; Kitis, M. Evaluation of Integrated Pollution Prevention Control in a textile fiber production and dyeing mill. J. Clean. Prod. 2015, 88, 116–124. [Google Scholar] [CrossRef]
  10. Tigini, V.; Prigione, V.; Giansanti, P.; Mangiavillano, A.; Pannocchia, A.; Varese, G.C. Fungal Biosorption, an Innovative Treatment for the Decolourisation and Detoxification of Textile Effluents. Water 2010, 2, 550–565. [Google Scholar] [CrossRef]
  11. Zhou, L.; Zhou, H.J. Evaluation of textile industry wastewater treatment and reuse in China. Desalin. Water Treat. 2019, 144, 330–338. [Google Scholar] [CrossRef]
  12. Bisschops, I.; Spanjers, H. Literature review on textile wastewater characterisation. Environ. Technol. 2003, 24, 1399–1411. [Google Scholar] [CrossRef]
  13. Liang, W.; Hu, H.Y.; Song, Y.D.; Wang, H.; Guo, Y.F. Effects of thiamine on treatment performance of textile wastewater. Desalination 2009, 242, 110–114. [Google Scholar] [CrossRef]
  14. Wang, C.; Fang, K.; Ji, W. Superfine pigment dyeing of silk fabric by exhaust process. Fibers Polym. 2007, 8, 225–229. [Google Scholar] [CrossRef]
  15. Hao, L.Y.; Cai, Y.Q.; Wang, R. Preparation of Ultrafine Pigment Dispersion and Investigation of its Adsorption Performance on Cationized Flax Substrate. Adsorpt. Sci. Technol. 2011, 29, 875–885. [Google Scholar] [CrossRef] [Green Version]
  16. Ma, W.; Du, S.; Yan, S.; Yu, X.; Zhang, Z.; Zhang, S. Salt-Free Dyeing of Modified Cotton through Graft Polymerization with Highly Enhanced Dye Fixation and Good Strength Properties. Polymers 2020, 12, 462. [Google Scholar] [CrossRef] [Green Version]
  17. Wang, M.; Wang, X.; Guo, C.; Zhao, T.; Li, W. A Feasible Method Applied to One-Bath Process of Wool/Acrylic Blended Fabrics with Novel Heterocyclic Reactive Dyes and Application Properties of Dyed Textiles. Polymers 2020, 12, 285. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  18. Sun, J.Z.; Wei, X.F.; Huang, P.Q.; Liu, Q.L. Preparation of the Plastic Water-Based Gravure Primary Ink with High Pigment. Adv. Mater. Res. 2011, 380, 15–19. [Google Scholar] [CrossRef]
  19. Vega Gutierrez, S.M.; He, Y.; Cao, Y.; Stone, D.; Walsh, Z.; Malhotra, R.; Chen, H.-L.; Chang, C.-H.; Robinson, S.C. Feasibility and Surface Evaluation of the Pigment from Scytalidium cuboideum for Inkjet Printing on Textiles. Coatings 2019, 9, 266. [Google Scholar] [CrossRef] [Green Version]
  20. Rocha, S.; Freitas, L., Jr.; Costa, C. Smart, Photocatalytic and Self-Cleaning Asphalt Mixtures: A Literature Review. Coatings 2019, 9, 696. [Google Scholar] [CrossRef] [Green Version]
  21. Chiloeches, A.; Echeverría, C.; Fernández-García, M.; Muñoz-Bonilla, A. Influence of Polymer Composition and Substrate on the Performance of Bioinspired Coatings with Antibacterial Activity. Coatings 2019, 9, 733. [Google Scholar] [CrossRef] [Green Version]
  22. Saleemi, S.; Naveed, T.; Riaz, T.; Memon, H.; Awan, J.A.; Siyal, M.I.; Xu, F.; Bae, J. Surface Functionalization of Cotton and PC Fabrics Using SiO2 and ZnO Nanoparticles for Durable Flame Retardant Properties. Coatings 2020, 10, 124. [Google Scholar] [CrossRef] [Green Version]
  23. Rossi, S.; Russo, F.; Bouchakour Rahmani, L. Study of the Durability and Aesthetical Properties of Powder Coatings Admixed with Pearlescent Pigments. Coatings 2020, 10, 229. [Google Scholar] [CrossRef] [Green Version]
  24. Kasaw, E.; Haile, A.; Getnet, M. Conductive Coatings of Cotton Fabric Consisting of Carbonized Charcoal for E-Textile. Coatings 2020, 10, 579. [Google Scholar] [CrossRef]
  25. Gorgieva, S.; Virant, N.; Ojstrsek, A. Complementary Assessment of Commercial Photoluminescent Pigments Printed on Cotton Fabric. Polymers 2019, 11, 1216. [Google Scholar] [CrossRef] [Green Version]
  26. Hakeim, O.A.; Abdelghaffar, F.; Haroun, A.A. UV-curable hyperbranched polyester acrylate encapsulation of phthalocyanine pigments for high performance synthetic fabrics printing. Dyes Pigment. 2020, 177. [Google Scholar] [CrossRef]
  27. Gao, D.; Feng, J.; Ma, J.; Lu, B.; Lin, J.; Zhang, J. Synthesis of cationic binder through surfactant-free emulsion polymerization for textile pigment applications. Prog. Org. Coat. 2014, 77, 1834–1840. [Google Scholar] [CrossRef]
  28. El-Shishtawy, R.M.; Nassar, S.H. Cationic pretreatment of cotton fabric for anionic dye and pigment printing with better fastness properties. Color. Technol. 2002, 118, 115–120. [Google Scholar] [CrossRef]
  29. Hakeim, O.A.; Abdou, L.A.W.; El-Gammal, M.S.; El-Naggar, A.M. An approach for vat color printing on cotton and polyester fabrics with electron beam irradiation curable formulations. Carbohydr. Polym. 2012, 87, 1467–1475. [Google Scholar] [CrossRef]
  30. Fang, K.; Jiang, X.; Wang, C.; Wu, M.; Yan, Y. Properties of the nanoscale hydrophilic cationic pigment based on quaternary surfactant. J. Dispers. Sci. Technol. 2008, 29, 52–57. [Google Scholar] [CrossRef]
  31. Cao, L.; Fei, X.; Zhao, H.; Huang, C. Preparation of phthalocyanine blue/rutile TiO2 composite pigment with a ball milling method and study on its NIR reflectivity. Dyes Pigment. 2020, 173. [Google Scholar] [CrossRef]
  32. Zhang, B.L.; Zhang, Z.Z.; Fei, X.N.; Gu, Y.C.; Yu, L. Preparation and properties of CI Pigment Red 170 modified with silica fume. Pigment. Resin. Technol. 2016, 45, 141–148. [Google Scholar] [CrossRef]
  33. Hao, L.; Wang, R.; Liu, J.; Liu, R. Ultrasound-assisted adsorption of anionic nanoscale pigment on cationised cotton fabrics. Carbohydr. Polym. 2012, 90, 1420–1427. [Google Scholar] [CrossRef]
  34. Li, Y.; Ren, J.; Chen, S.; Fan, F.; Shen, Q.; Wang, C. Cationic Superfine Pigment Dyeing for Wool Using Exhaust Process by pH Adjustment. Fibers Polym. 2015, 16, 67–72. [Google Scholar] [CrossRef]
  35. Wang, K.; Wang, C.; Wang, C. Acrylic yarns dyeing properties of cationic ultra-fine pigment modified by TDBAC. Colloids Surf. A 2013, 431, 114–119. [Google Scholar] [CrossRef]
  36. Cao, G.; Lu, X.; Xu, W.; Wang, X. Electrochemical Pigment Coloring of Wool Fabrics. Fibers Polym. 2018, 19, 65–70. [Google Scholar] [CrossRef]
  37. Li, M.; Zhang, L.; Qiu, M.; Zhang, Y.; Fu, S. Dyeing property of fluorescent pigment latex on cationic knitted cotton fabrics. Text. Res. J. 2019, 89, 422–433. [Google Scholar] [CrossRef]
  38. Ma, T.; Cao, Y.; Chen, H. Synthesis and characterization of cationic carbon black pigment with quaternary ammonium groups and its dyeing properties for wool fabrics. Colloids Surf. A 2018, 549, 43–49. [Google Scholar] [CrossRef]
  39. Eshkalak, S.K.; Khatibzadeh, M.; Kowsari, E.; Chinnappan, A.; Ramakrishna, S. A novel surface modification of copper (II) phthalocyanine with ionic liquids as electronic ink. Dyes Pigment. 2018, 154, 296–302. [Google Scholar] [CrossRef]
  40. Eshkalak, S.K.; Khatibzadeh, M.; Kowsari, E.; Chinnappan, A.; Ramakrishna, S. Application of ionic liquids as charge control agents of pigments and preparation of microcapsules as electronic inks through electrospraying. Opt. Mater. 2018, 84, 73–81. [Google Scholar] [CrossRef]
  41. Leelajariyakul, S.; Noguchi, H.; Kiatkamjornwong, S. Surface-modified and micro-encapsulated pigmented inks for ink jet printing on textile fabrics. Prog. Org. Coat. 2008, 62, 145–161. [Google Scholar] [CrossRef]
  42. Li, D.; Sun, G. Coloration of textiles with self-dispersible carbon black nanoparticles. Dyes Pigment. 2007, 72, 144–149. [Google Scholar] [CrossRef]
  43. Nagose, S.; Rose, E.; Joshi, A. Study on wetting and dispersion of the Pigment Yellow 110. Prog. Org. Coat. 2019, 133, 55–60. [Google Scholar] [CrossRef]
  44. Yu, Y.; Gambale, R.J.; Amici, R.M. Process for Preparing Surface-Modified Pigments and Applications for Ink Jet Ink. Patent WO2000052102A1, 8 September 2000. [Google Scholar]
  45. Shakhnovich, A.I. Modified Pigments. U.S. Patent 8,771,411B2, 8 July 2014. [Google Scholar]
Coatings 10 00741 g001 550
Figure 1. Chemical structure of (a) Pigment Blue 15:4; (b) p-aminobenzene sulfonic acid; (c) Acid Blue 93; and (d) reaction scheme.
Figure 1. Chemical structure of (a) Pigment Blue 15:4; (b) p-aminobenzene sulfonic acid; (c) Acid Blue 93; and (d) reaction scheme.
Coatings 10 00741 g001
Coatings 10 00741 g002 550
Figure 2. Dyeing process for wool with self-dispersing pigment.
Figure 2. Dyeing process for wool with self-dispersing pigment.
Coatings 10 00741 g002
Coatings 10 00741 g003 550
Figure 3. Absorption of visible light of unmodified pigments (a) and modified pigments (b).
Figure 3. Absorption of visible light of unmodified pigments (a) and modified pigments (b).
Coatings 10 00741 g003
Coatings 10 00741 g004 550
Figure 4. Effect of dyebath pH on uptake.
Figure 4. Effect of dyebath pH on uptake.
Coatings 10 00741 g004
Coatings 10 00741 g005 550
Figure 5. Effect of dyeing time on uptake of the self-dispersing pigments.
Figure 5. Effect of dyeing time on uptake of the self-dispersing pigments.
Coatings 10 00741 g005
Coatings 10 00741 g006 550
Figure 6. Effect of dyeing time on K/S value.
Figure 6. Effect of dyeing time on K/S value.
Coatings 10 00741 g006
Coatings 10 00741 g007 550
Figure 7. Effect of pigment amount on K/S value.
Figure 7. Effect of pigment amount on K/S value.
Coatings 10 00741 g007
Coatings 10 00741 g008 550
Figure 8. SEM of modified pigments (a) and the dye Acid Blue 93 (b).
Figure 8. SEM of modified pigments (a) and the dye Acid Blue 93 (b).
Coatings 10 00741 g008
Coatings 10 00741 g009 550
Figure 9. Fabric dyed with modified pigment without a light fastness test (a) and with a light fastness test (b); fabric dyed with acid dye without a light fastness test (c) and with a light fastness test (d).
Figure 9. Fabric dyed with modified pigment without a light fastness test (a) and with a light fastness test (b); fabric dyed with acid dye without a light fastness test (c) and with a light fastness test (d).
Coatings 10 00741 g009
Table
Table 1. Particle size, polydispersity index (PDI), and zeta potential of the modified pigment.
Table 1. Particle size, polydispersity index (PDI), and zeta potential of the modified pigment.
Particle Size (nm)PDIZeta Potential (mV)
134.50.216−45.4
Table
Table 2. Element amount of unmodified pigments (UP) and modified pigments (MP).
Table 2. Element amount of unmodified pigments (UP) and modified pigments (MP).
SampleC (%)N (%)O (%)S (%)
UP80.0916.633.070.21
MP75.6112.4510.191.74
Table
Table 3. Comparison of the fastness of modified pigment (MP) and Acid Blue 93 Dye.
Table 3. Comparison of the fastness of modified pigment (MP) and Acid Blue 93 Dye.
SampleLight FastnessDry Rubbing FastnessWet Rubbing Fastness
MP533
Dye333

Share and Cite

MDPI and ACS Style

Nie, L.; Chang, G.; Li, R. Preparation and Characterization of Self-Dispersing Phthalocyanine Blue 15:4 Pigment for Dyeing of Wool Textiles. Coatings 2020, 10, 741. https://doi.org/10.3390/coatings10080741

AMA Style

Nie L, Chang G, Li R. Preparation and Characterization of Self-Dispersing Phthalocyanine Blue 15:4 Pigment for Dyeing of Wool Textiles. Coatings. 2020; 10(8):741. https://doi.org/10.3390/coatings10080741

Chicago/Turabian Style

Nie, Lun, Guangtao Chang, and Ruoxin Li. 2020. "Preparation and Characterization of Self-Dispersing Phthalocyanine Blue 15:4 Pigment for Dyeing of Wool Textiles" Coatings 10, no. 8: 741. https://doi.org/10.3390/coatings10080741

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop