To read this content please select one of the options below:

Solution of direct and inverse conduction heat transfer problems using the method of fundamental solutions and differential evolution

Adam Basílio (School of Chemical Engineering, Federal University of Uberlândia, Uberlândia, Brazil)
Fran Sérgio Lobato (School of Chemical Engineering, Federal University of Uberlândia, Uberlândia, Brazil)
Fábio de Oliveira Arouca (School of Chemical Engineering, Federal University of Uberlândia, Uberlândia, Brazil)

Engineering Computations

ISSN: 0264-4401

Article publication date: 3 June 2020

Issue publication date: 28 October 2020

120

Abstract

Purpose

The study of heat transfer mechanisms is an area of great interest because of various applications that can be developed. Mathematically, these phenomena are usually represented by partial differential equations associated with initial and boundary conditions. In general, the resolution of these problems requires using numerical techniques through discretization of boundary and internal points of the domain considered, implying a high computational cost. As an alternative to reducing computational costs, various approaches based on meshless (or meshfree) methods have been evaluated in the literature. In this contribution, the purpose of this paper is to formulate and solve direct and inverse problems applied to Laplace’s equation (steady state and bi-dimensional) considering different geometries and regularization techniques. For this purpose, the method of fundamental solutions is associated to Tikhonov regularization or the singular value decomposition method for solving the direct problem and the differential Evolution algorithm is considered as an optimization tool for solving the inverse problem. From the obtained results, it was observed that using a regularization technique is very important for obtaining a reliable solution. Concerning the inverse problem, it was concluded that the results obtained by the proposed methodology were considered satisfactory, as even with different levels of noise, good estimates for design variables in proposed inverse problems were obtained.

Design/methodology/approach

In this contribution, the method of fundamental solution is used to solve inverse problems considering the Laplace equation.

Findings

In general, the proposed methodology was able to solve inverse problems considering different geometries.

Originality/value

The association between the differential evolution algorithm and the method of fundamental solutions is the major contribution.

Keywords

Acknowledgements

The authors would like to thank the CAPES, FAPEMIG and CNPq agencies for the financial support for this research.

Citation

Basílio, A., Lobato, F.S. and Arouca, F.d.O. (2020), "Solution of direct and inverse conduction heat transfer problems using the method of fundamental solutions and differential evolution", Engineering Computations, Vol. 37 No. 9, pp. 3293-3319. https://doi.org/10.1108/EC-01-2020-0017

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles