Abstract
The surface structure of a cutting insert of the standard (Ti,W)C–WC–6Co cemented carbide, T15K6, has been studied after interaction with a TiC–Ni based powder mixture. It has been shown that an external layer with two-phase (Ті,W)С–(Co,Ni) and intermediate (Ti,W)C–WC–6(Co,Ni) structures of variable composition is formed on the surface of this insert. The formation of the (Ti, W)С–(Co, Ni) structure in the external layer occurs as a result of Co, W, and C diffusion from the volume of an insert onto its surface and counter Ni diffusion from the surface of an insert into its volume.
Similar content being viewed by others
Notes
Hereinafter, the content is given in wt %.
REFERENCES
Tret’yakov, V.I., Osnovy metallovedeniya i tekhnologii proizvodstva spechennykh tverdykh splavov (Fundamentals of Metallurgical Science and the Production Technology of the Baked Firm Alloys), Moscow: Metallurgiya, 1976.
Chaporova, I.N. and Cherniavskii, K.S., Struktura spechennykh tverdykh splavov (Structure of Sintered Hard Alloys), Moscow: Metallurgiya, 1975.
Trent, E.M., Metal Cutting, London: Butterworth, 1976.
Cheburaeva, P.F. and Chaporova, I.N., Role of tantalum in the TiC–WC–TaC–Co hard metals. I. Effect of tantalum concentration on the composition and properties of the carbide and cobalt phases in the TiC–WC–TaC–Co hard metals, Powder Metall. Met. Ceram., 1986, vol. 25, no. 4, pp. 327–331.
Kubel, E. and Lux, D., Influence of substitution of NbC or HfC/NbC in cemented carbide milling grades, Int. J. Refract. Met. Hard Mater., 1984, vol. 3, no. 4, pp. 192–196.
Shuster, L.M., Adgezionnoe vzaimodeistvie instrumenta s obrabatyvaemym materialom (Adhesive Interaction of a Tool with Processed Material), Moscow: Mashinostroenie, 1988.
Humenik, M. and Moskowitz, D., US Patent 3878592, 1975.
Bonny, K., De Baets, P., van Wittenberghe, J., Perez Delgado, Y., Vleugels, J., van der Biest, O., and Lauwers, B., Influence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide, Tribol. Int., 2010, vol. 43, pp. 2333–2344.
Ettmayer P., Hard metals and cermets, Ann. Rev. Mater. Sci., 1989, vol. 9, pp. 145–164.
Bellosi, A., Calravarini, R., Faga, M., Monteverde, G.F., Zancolò, C., and D’Errico, G.E., Characterization and application of titanium carbonitride-based cutting tools, J. Mater. Proc. Technol., 2003, vols. 143–144, pp. 527–532.
Bodrova, L.G., Kramar, G.M., Mul, O.V., Koval, I.V., and Sushynskiy, V.I., Effect of nano-WC alloying additions on the structure formation of TiC–5VC–18NiCr cermets, Proc. World PM2010 Congr. and Exhibition, Chantilly: Eur. Powder Metall. Assoc., 2010, vol. 3, pp. 479–484.
Jung, J., Effect of ultra-fine powders on the microstructure of Ti(C,N)–xWC–Ni cermets, Acta Mater., 2004, vol. 52, pp. 1379–1386.
Vereshchaka, A.S. and Tret’yakov, I.P., Rezhushchie insturmenty s iznosostoikimi pokrytiyami (Cutting Tools with Wear-Resistant Coatings), Moscow: Mashinostroenie, 1986.
Novikov, N.V., Prokopiv, N.M., Tkach, V.N., Kharchenko, O.V., Chepurnoi, A.D., and Terekhov, P.A., The structure and properties of cutting blades from T15K6 alloys after thermocompression treatment, in Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya i primeneniya (Rock Cutting and Metalworking Tools: Equipment and Production and Implementation Technologies), Kyiv: Inst. Sverkhtverd. Mater. im. V.N. Bakulya, 2007, no. 9, pp. 337–344.
Serdyuk, Yu.D., Semizhon, O.A., Prokopiv, N.M., Petasyuk, G.A., Kharchenko, O.V., and Omel’chuk, T.V., The influence of thermal compression treatment parameters on quality characteristics and wear mechanisms of T5K10 carbide inserts in rough turning, J. Superhard Mater., 2011, vol. 33, no. 2, pp. 120–128.
Zakhariev, Z., Petrov, K., and Christov, M., Preparation and some properties of boride diffusion lauers herd WC–TiC–Co alloys, J. Less-Common Met., 1981, vol. 82, pp. 57–62.
Chernega, S.M., Poliakov, I.A., and Krasovskiy, M.A., Increasing the wear resistance of the T15K6 hard alloy by boriding and complex saturation with boron and copper, J. Superhard Mater., 2016, vol. 38, no. 3, pp. 190–196.
Lisovsky, A.F., Gracheva, T.E., and Kulakovsky, V.N., Composition and properties of (Ti,W)C–WC–Co sintered carbides alloyed by MMT-process, Int. J. Refract. Met. Hard Mater., 1995, vol. 13, no. 6, pp. 379–383.
Prokopiv, M.M., Formation of layer WC-(Co,Ni,Al) structure on the cutting plate surface of WC–7(W,Ti)C–10Co cemented carbide in the contact area with Ni3Al melt, J. Superhard Mater., 2019, vol. 41, no. 3, pp. 149–156.
Lisovsky, A.F., Some problems on technical use of the phenomenon of metal melts imbibition of sintered composites, Powder Metal. Int., 1989, vol. 21, no. 6, pp. 7–10.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by E. Glushachenkova
About this article
Cite this article
Prokopiv, M.M. Formation of a Spherical Structure on the Surface of the 79WC–15TiC–6Co Cemented Carbide upon Interaction with a TiC–20Ni Powder Mixture. J. Superhard Mater. 42, 101–107 (2020). https://doi.org/10.3103/S1063457620020082
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457620020082