Abstract
The toppling deformation of a rock mass is an important form of rock slope failure that often occurs during the excavation process of anti-dip rock slopes. The toppling deformation is very important for controlling slope deformation, determining reasonable anchorage support modes and ensuring the effectiveness of support measures during construction and operation. In this paper, an indoor test was designed and an indoor test model was developed according to engineering practice and the analogy method to study the influence of the anchorage angle and find the most suitable anchoring method for a soft-hard interbedded toppling deformed rock mass. The effect of different anchorage angles on the anchorage effect of toppled deformation slopes was studied by indoor tests. The number of cracks, the number of broken fractures, the average depth of broken fractures, the number of toppling-bending slabs, and the average bending angle of the model were determined through the tests. According to the comprehensive results of the test analysis and analytic hierarchy process, an anchorage angle of 45° is optimal. The results obtained by the test analysis and the analytic hierarchy process were consistent. The test and analysis results have a guiding significance for engineering applications and help to select the best anchorage angle and anchorage mode for actual soft-hard interbedded toppling deformation slopes.
Similar content being viewed by others
References
Aydan Ö, Kawamoto T (1992) The stability of slopes and underground openings against flexural toppling and their stabilization. Rock Mechanics and Rock Engineering 25(3):143–165, DOI: https://doi.org/10.1007/BF01019709
Benmokrane B, Chennouf A, Mitri HS (1995) Laboratory evaluation of cement-based grouts and grouted rock anchors. International Journal of Rock Mechanics and MiningSciences & Geomechanics Abstracts 32(7):633–642, DOI: https://doi.org/10.1016/0148-9062(95)00021-8
Chen CX, Zheng Y, Sun CY (2016) An analytical approach on flexural toppling failure of counter-tilt slopes of layered rock. Chinese Journal of Rock Mechanics and Engineering 35(11):2175–2187, DOI: https://doi.org/10.13722/j.cnki.jrme.2016.1001 (in Chinese)
Dong ML, Kulatilake PHSW, Zhang FM (2018) Deformation and stability investigations in 3-D of an excavated rock slope in a hydroelectric power station in China. Computers and Geotechnics 96:132–149, DOI: https://doi.org/10.1016/j.compgeo.2017.10.019
Huang WS, Lin ML, Liu HC, Lin HH (2012) Abduction of toe-excavation induced failure process from LEM and FDM for a dip slope with rock anchorage in Taiwan. EGU general assembly 2012, April 22–27, Vienna, Austria, 6796, DOI: https://doi.org/10.1016/0002-9343(61)90060-2
Kulatilake PHSW, Shu B (2015) Prediction of rock mass deformations in three dimensions for a part of an open pit mine and comparison with field deformation monitoring data. Geotechnical and Geological Engineering 33(6):1551–1568, DOI: https://doi.org/10.1007/s10706-015-9921-5
Li C, Stillborg B (1999) Analytical models for rock bolts. International Journal of Rock Mechanics and Mining Sciences 36(8):1013–1029, DOI: https://doi.org/10.1016/S1365-1609(99)00064-7
Saaty TL, Vargas LG (2012) A new approach to the Middle East conflict: The analytic hierarchy process. Journal of Multi-Criteria Decision Analysis 175:203–247, DOI: https://doi.org/10.1007/978-1-4614-3597-6_15
Saaty TL, Vargas LG, Zoffer HJ (2015) A structured scientific solution to the Israeli-Palestinian conflict: The analytic hierarchy process approach. Decision Analytics 2(1):1–53, DOI: https://doi.org/10.1186/s40165-015-0017-3
Wang FL, Liu CH, Gong Z (2014) Mechanisms of bolt support for bedding rock slopes. Chinese Journal of Rock Mechanics and Engineering 6:1465–1470 (in Chinese)
Zhang Z, Liu G, Wu S, Tang H, Wang T (2015) Rock slope deformation mechanism in the Cihaxia Hydropower Station, Northwest China. Bulletin of Engineering Geology & the Environment 74(3):943–958, DOI: https://doi.org/10.1007/s10064-014-0672-y
Zheng Y, Chen CX, Liu TT, Zhang HN, Sun CY (2017) Analytical approach of counter tilt rock slopes locally reinforced by fully grouted bolts. Chinese Journal of Rock Mechanics and Engineering 36(X):1–12, DOI: https://doi.org/10.13722/j.cnki.jrme.2017.0532 (in Chinese)
Zhou S, Rabczuk T, Zhuang X (2018a) Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies. Advances in Engineering Software 122:31–49, DOI: https://doi.org/10.1016/j.advengsoft.2018.03.012
Zhou S, Zhuang X, Rabczuk T (2018b) A phase-field modeling approach of fracture propagation in poroelastic media. Engineering Geology 240:189–203, DOI: https://doi.org/10.1016/j.enggeo.2018.04.008
Zhou S, Zhuang X, Rabczuk T (2019) Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation. Computer Methods in Applied Mechanics and Engineering 355:729–752, DOI: https://doi.org/10.1016/j.cma.2019.06.021
Zhou S, Zhuang X, Zhu H, Rabczuk T (2018c) Phase field modelling of crack propagation, branching and coalescence in rocks. Theoretical and Applied Fracture Mechanics 96:174–192, DOI: https://doi.org/10.1016/j.tafmec.2018.04.011
Zhuang X, Zhou S, Sheng M, Li G (2020) On the hydraulic fracturing in naturally-layered porous media using the phase field method. Engineering Geology 266:105306, DOI: https://doi.org/10.1016/j.enggeo.2019.105306
Acknowledgements
Not Applicable
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dong, M., Zhang, F., Hu, M. et al. Study on the Influence of Anchorage Angle on the Anchorage Effect of Soft-Hard Interbedded Toppling Deformed Rock Mass. KSCE J Civ Eng 24, 2382–2392 (2020). https://doi.org/10.1007/s12205-020-2386-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-2386-y