Design of a Novel Second-Order Prediction Differential Model Solved by Using Adams and Explicit Runge–Kutta Numerical Methods

Sabir, Zulqurnain; Guirao, Juan L. G.; Saeed, Tareq; Erdoğan, Fevzi

doi:https://doi.org/10.1155/2020/9704968

Mathematical Problems in Engineering

On this page

Abstract Introduction Results Conclusions Data Availability Conflicts of Interest References Copyright Related Articles

Special Issue

Recent Trends in Special Functions and Analysis of Differential Equations

View this Special Issue

Research Article | Open Access

Volume 2020 | Article ID 9704968 | https://doi.org/10.1155/2020/9704968

Design of a Novel Second-Order Prediction Differential Model Solved by Using Adams and Explicit Runge–Kutta Numerical Methods

Zulqurnain Sabir,¹Juan L. G. Guirao,²Tareq Saeed,³and Fevzi Erdoğan⁴

Guest Editor: Praveen Agarwal

Received21 Feb 2020

Accepted09 Jun 2020

Published10 Jul 2020

Abstract

In this study, a novel second-order prediction differential model is designed, and numerical solutions of this novel model are presented using the integrated strength of the Adams and explicit Runge–Kutta schemes. The idea of the present study comes to the mind to see the importance of delay differential equations. For verification of the novel designed model, four different examples of the designed model are numerically solved by applying the Adams and explicit Runge–Kutta schemes. These obtained numerical results have been compared with the exact solutions of each example that indicate the performance and exactness of the designed model. Moreover, the results of the designed model have been presented numerically and graphically.

1. Introduction

The historical delay differential equations (DDEs) are applied in the pioneer work of Newton and Leibnitz in the last years of the 16^th century. To understand the worth and importance of the DDEs, one can see their extensive and wide-ranging applications in the field of scientific wonders. Few mentioned applications are population dynamics, economical systems, engineering systems, transports, and communication models [1–4]. Many researchers worked to solve DDEs in different years, e.g., Kondorse studied DDEs in the seventh decade of the 17^th century, but properly used the applications of DDEs in the 19^th century. Kuang [2] and Hale and LaSalle [5] presented the detailed theory, solution schemes, and applications of DDEs. Perko [6] studied linear/nonlinear differential models for the dynamical system and configuration. Beretta and Kuang [7] worked on the geometric constancy of DDEs with the constraints of delay values. Frazier [8] explained the DDEs of the second kind by applying the wavelet Galerkin scheme. Rangkuti and Noorani [9] established the exact solution of DDEs by applying the iterative method named as a coupled variation scheme with the support of the Taylor series method. Chapra [10] discussed the scheme of Runge–Kutta for solving both types of differential delay and nondelay models. Adel and Sabir [11] presented the numerical solutions of a nonlinear second-order Lane–Emden pantograph delay differential model via the Bernoulli collocation method. Sabir et al. [12, 13] solved the nonlinear functional differential models of second and third order. Erdogan et al. [14] applied the finite difference method on a layer-adapted mesh for singularly perturbed DDEs. Some more details of DDEs are provided in references [15–20]. The literature form of the second-order DDE is given as follows [21]:where is used for the initial condition and is the delayed term in the abovementioned equation. It is clear in understanding that the appearance of this term in any differential equation shows the DDE that means to subtract some values from time. The question arises here when we add some values in time then what happens, i.e., . This clearly indicates the prediction and aim of the present work is related to design a new model based on the prediction differential equation. The general form of the new second-order prediction differential model along with initial conditions is presented aswhere is used as a prediction term in equation (2). This prediction differential model can be used to forecast the weather, transport, engineering, stock markets, technology, biological models, astrophysics, and many more. Moreover, the obtained numerical results from both of the schemes have been compared with the exact solution to verify the correctness and exactness of the designed model presented in equation (2).

Some salient features of the designed model are given as follows:(i)The novel prediction model is successfully designed by considering the worth of the delay differential model(ii)For verification of the designed model, the obtained numerical results have been compared with the exact solutions(iii)Easily comprehensible procedures with effortless implementation, conserved accuracy in close locality of the input interval, broader, and extendibility applicability are other considerable advantages.

The remaining parts of the paper are organized as follows. Section 2 shows the designed methodology. Section 3 represents the detailed results. The conclusions and future research directions of the present study are provided in the last section.

2. Methodology

In the present study, the strength of predictor-corrector Adams technique [22, 23] and explicit Runge–Kutta numerical technique [24, 25] is exploited to solve the second-order prediction differential model.

2.1. Predictor-Corrector Adams Numerical Scheme

To find the numerical solutions of the novel designed prediction differential model, the predictor-corrector numerical technique is applied, which takes further two steps to complete. Step 1: the approximate measures of prediction are accomplished Step 2: to find if the numerical solutions of correction are capable with the similar contributions of prediction.

The generalized Adams–Bashforth two-step numerical scheme using the predictor-corrector techniques is given as

The Adams-Moulton two-step corrector scheme is shown as follows:

The 4-step predictor-corrector scheme is provided as follows:

The Adams–Bashforth–Moulton 4-step scheme is written as follows:

2.2. Explicit Runge–Kutta Numerical Scheme

The explicit Runge–Kutta scheme is applied to solve the novel designed second-order prediction model. The general form of the explicit Runge–Kutta scheme is considered as

The first step is to consider the obtained initial results, and slopes for all variables are predictable. These attained numerical conclusions for slopes (the) at the middle point of the interval domain are taken to make the dependent variable designs, while in the second phase, the slopes of the central point (the) are obtained by using these accomplished values based on the middle points. The calculated numerical values for slopes are twisted back using the first point of the other set of central point values that are instigated for the new slope of predictions at the central point (the). These numerical calculated values are complementary functional to make the predictions to develop the slopes at the ending point of the interval domain (the). Similarly, all the numerical values for are accomplished to make an additional set of growth functions and, finally, take the initial point to make the last prediction.

3. Simulations and Results

In this section of the study, the prediction differential model presented in equation (2) is solved by using the four numerical examples based on the predictor-corrector Adams technique and explicit Runge–Kutta method. Furthermore, the obtained numerical results using both the schemes have been compared with the exact solutions of each example.

Example 1. Consider the second-order prediction differential equation along with the initial conditions given as follows:The exact solution of equation (9) is .

Example 2. Consider the second-order prediction differential equation along with boundary conditions given as follows:The exact solution of equation (10) is .

Example 3. Consider the second-order prediction differential equation involving trigonometric functions along with initial conditions given as follows:The exact solution of equation (11) is .

Example 4. Consider the second-order prediction differential equation along with initial conditions given as follows:The exact solution of equation (12) is .
It is clearly seen that the prediction term is involved in the form of , in Examples 1 and 2, respectively. The prediction terms are involved four times in Example 3, i.e., , , , and . Moreover, the prediction terms appeared twice in Example 4, i.e., and .
The graphic illustration based on the numerical results for all four examples is provided in Figure 1. The explicit Runge–Kutta scheme is used to find the graphical values for all the examples. The plots of Figures 1(a) to 1(d) are based on Examples 1 to 4. Figure 1(a) is plotted in the domain of [0, 30], and the results are found to be positive in all intervals. The plots of Figure 1(b) are plotted in the domain of [0, 3]. The results represent positive values in most of the intervals. However, negative values have been noticed in the subinterval [1, 2]. Figures 1(c) and 1(d) are plotted in the domain of [0, ] and [0, 1], respectively. It is noticed in the table that positive results have seen in both Examples 3 and 4. For comparison of the results, the plots of exact and numerical solutions have been drawn in Figure 2. The overlapping of the results shows the exactness and accurateness of the designed model. For more clear results of all the examples, the numerical results of exact solutions and the predictor-corrector Adams numerical scheme are tabulated in Tables 1 and 2. The comparison of the Adams numerical results and exact solutions are same up to a higher level.

(a)

(b)

(c)

(d)

(a)

(b)

(c)

(d)

4. Conclusions

The present study is carried out to design a novel second-order prediction differential model by manipulating the strength of the Adams numerical scheme and explicit Runge–Kutta scheme. The designed novel prediction differential model will be very useful and can be applied in many applications. Four different variants of the designed model have been solved by using the Adams and Runge–Kutta schemes and compared the obtained numerical results with the exact solutions. The overlapping of the exact and numerical reference solutions show the worth and accuracy of the novel designed prediction differential model. It is clear in understanding that the proposed methods are valuable and suitable for solving the second-order prediction differential model due to accurate results for all the examples of the second-order prediction differential model. For solving all four examples, the proposed Adams and explicit Runge–Kutta schemes are found to be very good in terms of accuracy and convergence. Software used for solving the prediction differential model is MATLAB R 2017(a) package and Mathematica 10.4.

In future, the nonlinear prediction Lane–Emden model and nonlinear prey-predator singular prediction model can be designed and solved via an artificial neural network [26–33].

Data Availability

Our manuscript is not data-based.

Conflicts of Interest

The authors declare that they have no conflicts of interest.

References

D. S. Li and M. Z. Liu, “Exact solution properties of a multi–pantograph delay differential equation,” Journal of Harbin Institute of Technology, vol. 32, no. 3, pp. 1–3, 2000.
View at: Google Scholar
Y. Kuang, Ed.in Delay Differential Equations: with Applications in Population Dynamics, vol. 191, Academic Press, Cambridge, CA, USA, 1993.
S. I. Niculescu, Delay Effects on Stability: A Robust Control Approach, vol. 269, Springer Science & Business Media, Berlin, Germany, 2001.
W. Li, B. Chen, C. Meng et al., “Ultrafast all-optical graphene modulator,” Nano Letters, vol. 14, no. 2, pp. 955–959, 2014.
View at: Publisher Site | Google Scholar
J. K. Hale and J. P. LaSalle, “Differential equations: linearity vs. nonlinearity,” SIAM Review, vol. 5, no. 3, pp. 249–272, 1963.
View at: Publisher Site | Google Scholar
L. Perko, Differential Equations and Dynamical Systems: Numerical Algorithms, Springer, New York, NY, USA, 3rd edition, 2001.
E. Beretta and Y. Kuang, “Geometric stability switch criteria in delay differential systems with delay dependent parameters,” SIAM Journal on Mathematical Analysis, vol. 33, no. 5, pp. 1144–1165, 2002.
View at: Publisher Site | Google Scholar
M. W. Frazier, Background: Complex Numbers and Linear Algebra. An Introduction to Wavelets through Linear Algebra, Springer, New York, NY, USA, 1999.
Y. M. Rangkuti and M. S. M. Noorani, “The exact solution of delay differential equations using coupling variational iteration with taylor series and small term,” Bulletin of Mathematics, vol. 4, no. 01, pp. 1–15, 2012.
View at: Google Scholar
S. C. Chapra, Applied Numerical Methods, McGraw-Hill, Columbus, Ohio, 4th edition, 2012.
W. Adel and Z. Sabir, “Solving a new design of nonlinear second–order lane–emden pantograph delay differential model via bernoulli collocation method,” The European Physical Journal Plus, vol. 135, no. 6, p. 427, 2020.
View at: Publisher Site | Google Scholar
Z. Sabir, H. A. Wahab, M. Umar, and F. Erdoğan, “Stochastic numerical approach for solving second order nonlinear singular functional differential equation,” Applied Mathematics and Computation, vol. 363, Article ID 124605, 2019.
View at: Publisher Site | Google Scholar
Z. Sabir, H. Günerhan, and J. L. Guirao, “On a new model based on third–order nonlinear multisingular functional differential equations,” Mathematical Problems in Engineering, vol. 2020, 9 pages, 2020.
View at: Publisher Site | Google Scholar
F. Erdogan, M. G. Sakar, and O. Saldır, “A finite difference method on layer-adapted mesh for singularly perturbed delay differential equations,” Applied Mathematics and Nonlinear Sciences, vol. 5, no. 1, Article ID 1683961, pp. 425–436, 2020.
View at: Publisher Site | Google Scholar
J. M. Sanz–Serna and B. Zhu, “Word–series high–order averaging of highly oscillatory differential equations with delay,” 2019, https://arxiv.org/abs/1906.06944.
View at: Google Scholar
N. Valliammal, C. Ravichandran, and J. H. Park, “On the controllability of fractional neutral integrodifferential delay equations with nonlocal conditions,” Mathematical Methods in the Applied Sciences, vol. 40, no. 14, pp. 5044–5055, 2017.
View at: Publisher Site | Google Scholar
A. Shvets and A. Makaseyev, “Deterministic chaos in pendulum systems with delay,” Applied Mathematics and Nonlinear Sciences, vol. 4, no. 1, pp. 1–8, 2019.
View at: Publisher Site | Google Scholar
T. Caraballo, M. A. Diop, and A. Mane, “Controllability for neutral stochastic functional integrodifferential equations with infinite delay,” Applied Mathematics and Nonlinear Sciences, vol. 1, no. 2, pp. 493–506, 2016.
View at: Publisher Site | Google Scholar
C. Ravichandran, N. Valliammal, and J. J. Nieto, “New results on exact controllability of a class of fractional neutral integro-differential systems with state-dependent delay in banach spaces,” Journal of the Franklin Institute, vol. 356, no. 3, pp. 1535–1565, 2019.
View at: Publisher Site | Google Scholar
M. A. Alqudah, C. Ravichandran, T. Abdeljawad, and N. Valliammal, “new results on caputo fractional–order neutral differential inclusions without compactness,” Advances in Difference Equations, vol. 2019, no. 1, Article ID 528, pp. 1–14, 2019.
View at: Publisher Site | Google Scholar
H. Y. Seong and Z. Abdul Majid, “Solving second order delay differential equations using direct two-point block method,” Ain Shams Engineering Journal, vol. 8, no. 1, pp. 59–66, 2017.
View at: Publisher Site | Google Scholar
M. Umar, Z. Sabir, and M. A. Z. Raja, “Intelligent computing for numerical treatment of nonlinear prey-predator models,” Applied Soft Computing, vol. 80, pp. 506–524, 2019.
View at: Publisher Site | Google Scholar
M. Calvo, J. I. Montijano, and L. Rández, “A new stepsize change technique for Adams methods,” Applied Mathematics and Nonlinear Sciences, vol. 1, no. 2, pp. 547–558, 2016.
View at: Publisher Site | Google Scholar
M. Umar, Z. Sabir, F. Amin, J. L. G. Guirao, and M. A. Z. Raja, “Stochastic numerical technique for solving HIV infection model of CD4+ T cells,” The European Physical Journal Plus, vol. 135, no. 6, p. 403, 2020.
View at: Publisher Site | Google Scholar
C. A. Kennedy and M. H. Carpenter, “Higher-order additive runge-kutta schemes for ordinary differential equations,” Applied Numerical Mathematics, vol. 136, pp. 183–205, 2019.
View at: Publisher Site | Google Scholar
N. İnce and A. Shamilov, “An application of new method to obtain probability density function of solution of stochastic differential equations,” Applied Mathematics and Nonlinear Sciences, vol. 5, no. 1, pp. 337–348, 2020.
View at: Publisher Site | Google Scholar
M. A. Z. Raja, M. Umar, Z. Sabir, J. A. Khan, and D. Baleanu, “A new stochastic computing paradigm for the dynamics of nonlinear singular heat conduction model of the human head,” The European Physical Journal Plus, vol. 133, no. 9, p. 364, 2018.
View at: Publisher Site | Google Scholar
Z. Sabir, M. A. Manzar, M. A. Z. Raja, M. Sheraz, and A. M. Wazwaz, “Neuro-heuristics for nonlinear singular thomas-fermi systems,” Applied Soft Computing, vol. 65, pp. 152–169, 2018.
View at: Publisher Site | Google Scholar
M. A. Z. Raja, J. Mehmood, Z. Sabir, A. K. Nasab, and M. A. Manzar, “Numerical solution of doubly singular nonlinear systems using neural networks-based integrated intelligent computing,” Neural Computing and Applications, vol. 31, no. 3, pp. 793–812, 2019.
View at: Publisher Site | Google Scholar
Z. Sabir, M. A. Z. Raja, M. Umar, and M. Shoaib, “Design of neuro-swarming-based heuristics to solve the third-order nonlinear multi-singular emden–fowler equation,” The European Physical Journal Plus, vol. 135, no. 6, p. 410, 2020.
View at: Publisher Site | Google Scholar
M. A. Z. Raja, Z. Sabir, N. Mehmood, E. S. Al-Aidarous, and J. A. Khan, “Design of stochastic solvers based on genetic algorithms for solving nonlinear equations,” Neural Computing and Applications, vol. 26, no. 1, pp. 1–23, 2015.
View at: Publisher Site | Google Scholar
Z. Sabir, F. Amin, D. Pohl, and J. L. Guirao, “Intelligence computing approach for solving second order system of emden-fowler model,” Journal of Intelligent & Fuzzy Systems, vol. 38, no. 6, pp. 7391–7406, 2020.
View at: Publisher Site | Google Scholar
Z. Sabir and M. A. Z. Raja, “Numeric treatment of nonlinear second order multi-point boundary value problems using ANN, GAs and sequential quadratic programming technique,” International Journal of Industrial Engineering Computations, vol. 5, no. 3, pp. 431–442, 2014.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2020 Zulqurnain Sabir et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

728

Downloads

715

Citations