Issue 43, 2020, Issue in Progress

A lauric acid-hybridized bentonite composite phase-changing material for thermal energy storage

Abstract

In this study, a form-stable composite phase-changing material (PCM) was synthesised by a vacuum impregnation method. Natural Na-bentonite and lauric acid (LA) were used as the supporting material and PCM, respectively. In addition, flake graphite (FG) was used for enhancing the thermal conductivity of the form-stable composite PCM, besides for blocking the leakage of the PCM. Notably, with the addition of FG, the period of melting and freezing of the composite PCM decreased to a certain extend. Meanwhile, the heat-transfer characteristic of the composite increased. Moreover, the as-prepared form-stable composite PCM showed good thermal reliability after 200 cycles of thermal-cold treatment and has the potential to be used in thermal energy storage systems.

Graphical abstract: A lauric acid-hybridized bentonite composite phase-changing material for thermal energy storage

Supplementary files

Article information

Article type
Paper
Submitted
05 Sep 2019
Accepted
23 Jun 2020
First published
08 Jul 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 25864-25873

A lauric acid-hybridized bentonite composite phase-changing material for thermal energy storage

S. Liu, J. Han, L. Wang, Y. Gao, H. Sun and W. Li, RSC Adv., 2020, 10, 25864 DOI: 10.1039/C9RA06936D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements