Skip to main content
Log in

Optimal design of a coil gun projectile by analyzing the drag coefficient and electromagnetic force on the projectile

  • Original Article
  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

The shape of a projectile greatly affects its velocity when fired from a coil gun. A magnetic field is generated when the capacitor is discharged and current flows through a solenoid coil, and the magnitude of the resulting magnetic force depends on the projectile shape. A projectile has different amounts of drag depending on its shape. We analyzed the magnetic force and drag coefficient of a coil gun projectile according to its shape. The shape of the projectile was optimally designed to obtain high magnetic force and a small drag coefficient. ANSYS CFD was used to analyze the drag coefficient, and the electromagnetic simulation program Maxwell was used to analyze the magnetic force. The projectile design was optimized carried out using the commercial PIDO tool PIAnO. The optimal projectile was fabricated, and an experiment was conducted to measure the final velocity and verify the performance.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. S. Noh, J. Kim and J. Bang, A numerical study on the effect of the tail wing of a projectile on the base drag, Journal of the Korea Institute of Military Science and Technology, 22(5) (2019) 625–636.

    Google Scholar 

  2. E. Elawwad et al., Flow computations past a triangular boat-tailed projectile, Defence Technology, 16(3) (2020) 712–719.

    Article  Google Scholar 

  3. T. Taha and Z. F. Cui, CFD modelling of slug flow in vertical tubes, Chemical Engineering Science, 61(2) (2006) 676–687.

    Article  Google Scholar 

  4. S. J. Kim, T. H. Chung and S. H. Bae, Striation and plasma bullet propagation in an atmospheric pressure plasma jet, Physics of Plasmas, 17(5) (2010) 053504.

    Article  Google Scholar 

  5. J.-W. Park et al., Computational flow analysis and drag coefficient research for angle of attack in slocum underwater glider, Journal of Ocean Engineering and Technology, 30(5) (2016) 381–388.

    Article  Google Scholar 

  6. M. A. Sohail, M. Ismail and S. A. Ali, CFD analysis of jet plume shock and sonic boom signatures interaction with different nozzle pressure ratios, 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST), IEEE (2019) 796–805.

  7. Z. Yadong, W. Ying and R. Jiangjun, Capacitor-driven coil-gun scaling relationships, IEEE Transactions on Plasma Science, 39(1) (2010) 220–224.

    Article  Google Scholar 

  8. H. M. Mohamed et al., Overlapped electromagnetic coilgun for low speed projectiles, Journal of Magnetics, 20(3) (2015) 322–329.

    Article  Google Scholar 

  9. S.-S. Gao et al., The test and analysis of a 3-stage reconnection coilgun, IEEE Transactions on Magnetics, 35(1) (1999) 142–147.

    Article  Google Scholar 

  10. S.-J. Lee, J. H. Kim and S.-H. Kim, Design and experiments of multi-stage coil gun system, Journal of Vibroengineering, 18(4) (2016) 2053–2060.

    Article  Google Scholar 

  11. S.-J. Lee et al., Coil gun electromagnetic launcher (EML) system with multi-stage electromagnetic coils, Journal of Magnetics, 18(4) (2013) 481–486.

    Article  Google Scholar 

  12. S.-J. Lee et al., Design optimization of coil gun to improve muzzle velocity, Journal of Vibroengineering, 17(2) (2015) 554–561.

    Google Scholar 

  13. Y. Hu, Y. Wang, Z. Yan, M. Jiang and L. Liang, Experiment and analysis on the new structure of the coilgun with stepped coil winding, IEEE Transactions on Plasma Science, 46 (2018) 2170–2174.

    Article  Google Scholar 

  14. M. A. Abdalla and H. M. Mohamed, Asymmetric multistage synchronous inductive coilgun for length reduction, higher muzzle velocity, and launching time reduction, IEEE Transactions on Plasma Science, 44(5) (2016) 785–789.

    Article  Google Scholar 

  15. X. Niu, W. Li and J. Feng, Nonparametric modeling and parameter optimization of multistage synchronous induction coilgun, IEEE Transactions on Plasma Science, 47(7) (2019) 3246–3255.

    Article  Google Scholar 

  16. V. Thakur, T. Yadav and B. Rajiv, Drag optimization of bluff bodies using CFD for aerodynamic applications, International Journal of Computational Engineering Research, 7 (4) (2017).

  17. B. H. Lim et al., The effect of projectile nose shape on the critical velocity of high-performance yarn, Fibers, 7(4) (2019) 29.

    Article  Google Scholar 

  18. K. M. Kpenyigba et al., Influence of projectile shape on dynamic behavior of steel sheet subjected to impact and perforation, Thin-Walled Structures, 65 (2013) 93–104.

    Article  Google Scholar 

  19. C. T. Lim, V. B. C. Tan and C. H. Cheong, Perforation of high-strength double-ply fabric system by varying shaped projectiles, International Journal of Impact Engineering, 27(6) (2002) 577–591.

    Article  Google Scholar 

  20. V. B. C. Tan, C. T. Lim and C. H. Cheong, Perforation of high-strength fabric by projectiles of different geometry, International Journal of Impact Engineering, 28(2) (2003) 207–222.

    Article  Google Scholar 

  21. B. G. Karpov, The Effect of Various Boattail Shapes on Base Pressure and Other Aerodynamic Characteristics of a 7-caliber Long Body of Revolution at M Equals 1.70, Army Ballistic Research Lab Aberdeen Proving Ground MD (1965).

  22. A. Mariotti, G. Buresti and M. V. Salvetti, Separation delay through contoured transverse grooves on a 2D boat-tailed bluff body: Effects on drag reduction and wake flow features, European Journal of Mechanics-B/Fluids, 74 (2019) 351–362.

    Article  MathSciNet  Google Scholar 

  23. K. Gemba, Shape Effects on Drag, Department of Aerospace Engineering, California State University, Long Beach, California (2007) 90840.

    Google Scholar 

Download references

Acknowledgments

This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (2017R1D1A3B0 3032139) and a Yeungnam University Research Grant in 2019.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jinho Kim.

Additional information

Recommended by Editor Seungjae Min

Se-Jong Kim is a senior student in the Department of Mechanical Engineering of Yeungnam University. His research interests are electric motor and actuator.

Jin-Ho Kim is a Professor in the Department of Mechanical Engineering of Yeungnam University. His research interest is electric motor and actuator.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kim, S., Kim, J. Optimal design of a coil gun projectile by analyzing the drag coefficient and electromagnetic force on the projectile. J Mech Sci Technol 34, 2903–2911 (2020). https://doi.org/10.1007/s12206-020-0622-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-020-0622-5

Keywords

Navigation