Energy recovery linear accelerators (ERLs) rely upon single-axis superconducting radio frequency (SRF) cavities to be an efficient source of relativistic electrons for high energy and nuclear physics. SRF cavities are also considered relevant for next-generation photon factories and radio-isotope production facilities. The ultimate energy recovery capability for the accelerator would be the ability to operate with a sufficiently spent beam and decrease the energy of the beam before the beam dump to a value lower than the beam injection energy. This is especially important for high current accelerators, where the beam injection energy could be as high as several MeV, and systems where partial beam loss can be expected. The efficient operation of energy recovery in linear accelerators is adversely affected by the typical degradation of the beam quality and current loss. This hinders the application of the ERLs in research and industry, and enabling the use of spent (partially lost current), degraded beams should broaden their application. We suggest that the use of the asymmetric operating mode observed in the dual-axis asymmetric cavities will enable such ultimate capabilities. We discuss the advantages of the application of fields of different amplitude along the cavity accelerating and decelerating axes and demonstrate that the fields can be tuned separately in each axis of the dual-axis cavity. The design of such a cavity and ways to optimize the energy recovery of a spent electron beam by tuning the dual-axis asymmetric SRF cavity are discussed.

• Received 13 March 2020
• Accepted 22 June 2020

DOI:https://doi.org/10.1103/PhysRevAccelBeams.23.071601

Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Published by the American Physical Society