Skip to main content

Modeling sediment diagenesis processes on riverbed to better quantify aquatic carbon fluxes and stocks in a small watershed of the Mid-Atlantic region

Abstract

Background

Despite the widely recognized importance of aquatic processes for bridging gaps in the global carbon cycle, there is still a lack of understanding of the role of riverbed processes for carbon flows and stocks in aquatic environments. Here, we added a sediment diagenesis and sediment carbon (C) resuspension module into the SWAT-C model and tested it for simulating both particulate organic C (POC) and dissolved organic C (DOC) fluxes using 4 years of monthly observations (2014–2017) in the Tuckahoe watershed (TW) in the U.S. Mid-Atlantic region.

Results

Sensitivity analyses show that parameters that regulate POC deposition in river networks are more sensitive than those that determine C resuspension from sediments. Further analyses indicate that allochthonous contributions to POC and DOC are about 36.6 and 46 kgC ha−1 year−1, respectively, while autochthonous contributions are less than 0.72 kgC ha−1 year−1 for both POC and DOC (less than 2% of allochthonous sources). The net deposition of POC on the riverbed (i.e., 11.4 kgC ha−1 year−1) retained ca. 31% of terrestrial inputs of POC. In addition, average annual buried C was 0.34 kgC ha−1 year−1, accounting for only 1% of terrestrial POC inputs or 3% of net POC deposition. The results indicate that about 79% of deposited organic C was converted to inorganic C (CH4 and CO2) in the sediment and eventually released into the overlying water column.

Conclusion

This study serves as an exploratory study on estimation of C fluxes from terrestrial to aquatic environments at the watershed scale. We demonstrated capabilities of the SWAT-C model to simulate C cycling from uplands to riverine ecosystems and estimated C sinks and sources in aquatic environments. Overall, the results highlight the importance of including carbon cycle dynamics within the riverbed in order to accurately estimate aquatic carbon fluxes and stocks. The new capabilities of SWAT-C are expected to serve as a useful tool to account for those processes in watershed C balance assessment.

Background

Recent studies highlight that carbon (C) cycling across terrestrial and aquatic environments are critical for bridging gaps in the global carbon cycle [1, 2]. The amount of C from terrestrial ecosystems exported to the oceans is only a fraction of that entering inland waters, and another fraction of this C is outgassed to the atmosphere as CO2 or is buried in freshwater sediments after erosion and transport from its sources [3, 4]. There are large uncertainties in estimations of C export from land, burial in water bodies, and outgassing from inland waters [5]. For instance, global estimates of terrestrial to aquatic C fluxes vary between 1.7 and 5.7 Pg C year−1 [6,7,8]; aquatic C burial is estimated to range from 0.15 to 1.6 Pg C year−1 [3, 9, 10]; and C outgassing estimates range from 0.75 to 3.88 Pg C year−1 [11,12,13,14]. Reducing uncertainties in estimates of aquatic C sources and sinks is critical for accurate quantification of the global C budget [15,16,17,18].

The aquatic C cycle in most watershed models is often oversimplified [19,20,21,22,23,24], though terrestrial C fluxes can be simulated with different levels of complexity of biogeochemical processes [25, 26]. In contrast, many water quality models require inputs from terrestrial processes to drive their simulations of complex aquatic processes such as hydrodynamics and biochemical conversion processes in streams and lakes [27,28,29,30,31]. In order to fill the gaps between watershed models and water quality models with respect to C cycling across terrestrial and aquatic ecosystems, we have developed terrestrial-aquatic C cycling algorithms within the framework of the Soil and Water Assessment Tool (SWAT) [24]. The enhanced SWAT model (hereafter SWAT-C) can simulate terrestrial C cycle processes including C uptake by photosynthesis, C release by plant and soil respiration, organic matter decomposition and mineralization, and disturbance processes (e.g., human activities) [32,33,34]. Furthermore, the model also represents aquatic C cycle processes including generation and transportation of total inorganic C (TIC), dissolved organic C (DOC), and particulate organic C (POC) from land to water bodies through runoff, leaching, erosion, and biogeochemical transformation processes between those different forms of C in freshwater [35, 36]. However, an important component of C fluxes in the aquatic environment, i.e., sediment diagenesis, was missing because there is a lack of representation of benthic carbon cycle processes within the SWAT-C model.

Particulate organic matter (including POC and algae debris) that is deposited onto the sediment bed will undergo complex decomposition and mineralization processes, which are referred to as sediment diagenesis [37]. The generated inorganic nutrients in the sediment on the riverbed can be recycled back to the water column via diffusion or resuspension resulting in an increased concentration of solutes. Nutrient resuspension is the process by which sediment porewater with elevated solute concentrations is mixed with the overlying water column due to sediment resuspension [38]. Deposited organic matter is also subject to sediment resuspension leading to accelerated mineralization rates in the overlying water column [39, 40]. In general, sediment is characterized as an sink of nutrients over years or decades; meanwhile sediment can become a net source by releasing previously-deposited nutrients to the water column over seasons or years [41, 42]. Nutrients released from the sediment and the amount of oxygen consumed during the process [i.e., sediment oxygen demand (SOD)] can contribute significantly to eutrophication and harmful hypoxia [43]. It is critical to model SOD and nutrient releases at the sediment–water interface in order to understand and mitigate the eutrophication problem and hypoxia in water bodies [28]. Therefore, for long-term simulations, an important aspect of water quality modeling is to describe sediment diagenesis processes and to estimate sediment fluxes released from the bed via diffusion and resuspension [43].

The aim of this research effort is to develop a benthic sediment diagenesis and C resuspension module, integrate it into SWAT-C, and apply it to understand the role of benthic carbon cycle processes in regulating aquatic carbon fluxes and stocks. Specifically, we conducted the following efforts: (1) developed a sediment diagenesis module within the frame-work of SWAT-C; (2) included nutrient resuspension processes in the sediment diagenesis module; (3) evaluated performance of the integrated model on POC and DOC simulations in a small watershed in the U.S. Mid-Atlantic region; (4) conducted parameter sensitivity analyses to identify important factors regulating coupled terrestrial-aquatic C cycling; and (5) analyzed various C fluxes associated with aquatic carbon cycling that include terrestrial inputs, buried bed sediments, outflow at the outlet, and deposition/resuspension on the riverbed.

Data sources and methods

Description of SWAT-C

The SWAT model is a continuous, physically-based, watershed-scale water quality model. It has been successfully employed and tested for simulating watershed hydrology, land surface water and heat exchange, and nutrient cycles across terrestrial and aquatic environments in a wide range of watersheds [44,45,46,47,48,49]. SWAT has been widely-used to simulate watershed water quantity and quality as affected by land use practices and climate change [50,51,52,53,54,55,56,57]. Recently, the CENTURY model [58] has been added to the SWAT-C model [32,33,34] to better refine the depiction of dynamics of soil organic matter (SOM) and residues including addition, decomposition, transformation, and removal of each SOM-residue pool present in surface and subsurface soil layers [32]. Further development of the SWAT-C model included new DOC/POC modules to simulate DOC/POC generation and transport processes in terrestrial environments [33, 35], and DOC/POC cycling in river networks [35, 36]. SWAT-C was successfully tested in the Cannonsville watershed in upper New York for simulating DOC fluxes [35], and two small watersheds in the Chesapeake Bay for POC fluxes [36]. In general, the current DOC/POC modules in SWAT-C allow it to satisfactorily estimate overall soil DOC/POC production and transport to streams, and to reproduce DOC/POC fluxes at the watershed outlet [35, 36]. Detailed model development and evaluation can be found in related publications [32, 33, 35, 36].

Adding sediment diagenesis and sediment C resuspension processes into the SWAT-C model

A sediment diagenesis module was added to SWAT-C to depict the C fluxes between the river water column and the sediment bed. Sediment C fluxes are based on a model developed by Di Toro [59] and employed by QUAL2K [37, 41, 60]. Here, we further developed the sediment C resuspension process coupled with a sediment diagenesis model. A schematic of the sediment diagenesis and sediment C resuspension module coupled with DOC/POC modules in SWAT-C is depicted in Fig. 1. In the newly added sediment diagenesis model, sediments are divided into two layers: a thin (1 mm) surface aerobic layer underlain by a thicker (10 cm) lower anaerobic layer (Fig. 1). Organic C is delivered to the anaerobic sediments via the settling of particulate organic matter (i.e., floating algae and POC). The settled C is further categorized into three reactive fractions: labile (G1), slow reacting (G2) and non-reacting (G3). G1 and G2 fractions of settled organic C are subject to mineralization reactions. The mineralized organic C, after consumption by denitrification, is transformed into dissolved methane (CH4) in anaerobic sediments by the process of methanogenesis. Because methane is relatively insoluble, its saturation can be exceeded, and CH4 gas (as bubbles) may be produced in anaerobic sediments (Fig. 1). Dissolved CH4 are then transported to the aerobic layer where some of the CH4 is oxidized into CO2 and the remaining dissolved CH4 is transported to the overlying water column via diffusion. Generated CO2 gas (as bubbles) in the aerobic sediment and CH4 gas (as bubbles) in the anaerobic sediment are lost from the sediment by bubbling processes into the overlying water column. Labile (G1), slow reacting (G2), non-reacting (G3) settled organic C and dissolved CH4 are subject to resuspension processes (Fig. 1). A fraction of settled organic C is buried out of the sediment system. Mass balance for organic C and CH4 in the sediment is illustrated in Fig. 1.

Fig. 1
figure 1

Simulated DOC and POC processes from terrestrial to aquatic environments within the SWAT-C model. The newly added sediment diagenesis and C resuspension processes are depicted at the sediment–water interface

The mass balance for labile (G1), slow reacting (G2), and non-reacting (G3) organic C in the anaerobic sediment layer considering C resuspension is written as [37],

$$H_{2} \frac{{dPOC_{Gi} }}{dt} = J_{POC,Gi} - J_{{POC_{R} ,Gi}} - J_{{POC_{MIN} ,Gi}} - J_{{POC_{Bury} ,Gi}}$$
(1)

where POCGi is the concentration of the Gi (i = 1, 2, or 3) organic C in the anaerobic sediment layer (g m−3), H2 is the thickness of the anaerobic layer (= 0.1 m), dt is the time step (day), \(J_{POC,Gi}\) is the flux of Gi organic C delivered to the anaerobic layer (g m−2 day−1), \(J_{{POC_{R} ,Gi}}\) is the resuspension flux for Gi organic C (g m−2 day−1), \(J_{{POC_{MIN} ,Gi}}\) is the mineralization flux (g m−2 day−1), and \(J_{{POC_{Bury} ,Gi}}\) is the burial flux for Gi organic C (g m−2 day−1). Organic C resuspended from the sediment bed is calculated by [43],

$$J_{{POC_{R} ,Gi}} = \frac{{POC_{Gi} }}{{\rho_{sed} \cdot 1000000}} \cdot J_{SED\_R}$$
(2)

where \(\rho_{sed}\) is sediment density (Mg m−3), and JSED_R is the resuspended sediment flux (g m−2 day−1), which is calculated with the sediment deposition and resuspension algorithm in SWAT.

A CH4 mass balance can then be written for the aerobic layer as [37],

$$H_{1} \frac{{dCH_{4} }}{dt} = J_{CH4,d} - J_{CH4,w} - J_{CH4,R} - J_{CH4,o}$$
(3)

where CH4 is the methane concentration in the aerobic layer (g m−3), H1 is the thickness of the aerobic layer (= 0.001 m), \(J_{CH4,d}\) is the flux of dissolved CH4 that is generated in the anaerobic layer and delivered to the aerobic sediment (g m−2 day−1),\(J_{CH4,w}\) is the CH4 diffusion flux to the overlying water column (g m−2 day−1), \(J_{CH4,R}\) is the CH4 resuspension flux (g m−2 day−1), and \(J_{CH4,o}\) is the CH4 oxidation flux (CO2 gas as the product) in the aerobic sediment (g m−2 day−1). CH4 resuspended from the sediment bed is calculated by [43],

$$J_{CH4,R} = \frac{{CH_{4} }}{{\rho_{sed} \cdot 1000000}} \cdot J_{SED\_R}$$
(4)

The \(J_{CH4,d}\) is calculated in the anaerobic layer as [37],

$$J_{CH4,d} = J_{C} - J_{C,den} - J_{CH4,gas}$$
(5)

where \(J_{C}\) is the C diagenesis flux (g m−2 day−1; = \(J_{{POC_{MIN} ,G1}} + J_{{POC_{MIN} ,G2}} )\), \(J_{C,den}\) is the C flux consumed by denitrification (g m−2 day−1), \(J_{CH4,gas}\) is the CH4 gas flux generated in the anaerobic layer when \(J_{C}\) is sufficiently large (g m−2 day−1). Detailed information regarding the calculation of various C fluxes in the aerobic and anaerobic layers can be found in [37]. It is worth noting that default values were adopted in the present study for all the coefficients and transformation rates used for associated sediment diagenesis flux calculations [37].

SWAT-C parameterization

Within the SWAT-C model, Du et al. [35] identified six calibration parameters controlling DOC cycling. Qi et al. [36] further sorted out eight calibration parameters for POC cycling. Based on the results from Qi et al. [36], two DOC and three POC associated parameters were identified as the most sensitive. The following five parameters were chosen to calibrate DOC and POC cycling: the DOC percolation coefficient (βDOC) which specifies the concentration of DOC in surface runoff as a fraction of the concentration in percolation; the liquid–solid partition coefficient (kOC) which determines the production of DOC in soil solution; the POC enrichment ratio (ERPOC) which is defined as the ratio of the concentration of POC in eroded soils to the concentration of soil organic C in the soil surface layer; and the LPOC and RPOC settling velocity (Vlpoc and Vrpoc, respectively) which control the deposition of POC (Table 1).

Table 1 Calibrated model parameter values for flow rate and sediment, POC and DOC loads in the study watershed

Study area and data collection

We used a small watershed, i.e., the Tuckahoe Watershed (TW; 220.7 km2), defined by the United States Geological Survey gauging station (USGS#01491500) at Tuckahoe Creak near Ruthsburg, MD (Fig. 2), to simulate C fluxes from terrestrial to riverine ecosystems. The TW is located in the headwaters of the Choptank River Watershed (CRW) in the coastal plain of the Chesapeake Bay (Fig. 2). The major land uses in the TW are agriculture (54.0%) and forestry (32.8%), and it is dominated by well-drained soils (56.1%; Hydrologic Soil Group, HSG-A&B) [61]. The Othello soil series (fine-silty) and the Mattapex soil series (fine-silty) are two commonly found cropland soil types in the TW [62]. Topography within the TW is relatively flat, with most areas having less than 2% slopes. The study area is characterized by a temperate and humid climate with an average annual temperature of 15.4 °C and an average annual amount of ca. 1200 mm precipitation [63, 64].

Fig. 2
figure 2

The location of Tuckahoe Watershed and USGS gauging station at the outlet of the watershed

We used a soil map based on the Soil Survey Geographic Database (SSURGO) from the United States Department of Agriculture (USDA), Natural Resources Conservation Service (NRCS) to provide soil properties information, and a 10-m Light Detection and Ranging (LiDAR)-based Digital Elevation Model (DEM) to provide topographic information. At the same time, the scheduling of crop rotations was generated using 2008–2012 data from the USDA-National Agriculture Statistics Service (NASS) Cropland Data Layer (CDL). High resolution (~ 1/8°) National Astronautics and Space Administration (NASA) North-American Land Data Assimilation System 2 (NLDAS2) climate forcing data [65] were used to provide daily weather inputs including precipitation, temperature, solar radiation, relative humidity, and wind speed [66]. For more information regarding SWAT model setup in the TW, please refer to Lee, Yeo [61].

We conducted monitoring of riverine total organic C (TOC) and DOC concentrations at the Ruthsburg USGS gauging station for the TW (Fig. 2). The in situ instrument packages containing full spectrum (200 to 700 nm) spectrophotometer probes (S-CAN Instruments; Vienna Austria) which perform water quality sampling at 30-min intervals were used. Multiwavelength calibrations were used for TOC and DOC in the stream water [67]. Fine time-resolution TOC and DOC data were aggregated to a monthly time scale for SWAT-C calibration and validation. POC was derived by subtracting DOC from TOC. Sediment data were collected from the United States Environmental Protection Agency (USEPA) Chesapeake Bay Program (CBP) water quality database [68]. In total, there are only 37 sediment concentration data from 2014 to 2017. We calculated daily sediment load by multiplying sediment concentration by stream flow of the sampling day.

Model calibration, validation, and sensitivity analysis

The sampling period (Jan. 2014–Oct. 2017) was divided for calibration (2014–2015) and validation (2016–2017) purposes. Before the calibration period, we used a 2-year (2012–2013) warm-up period to initialize the SWAT-C model. We chose the most frequently calibrated parameters for monthly flow rate based on previous studies conducted in the study watersheds [36, 69]. We adopted a multi-step procedure provided by the previous study to calibrate POC and DOC loads [36]. The first step was to calibrate streamflow because DOC and POC loads are closely associated with water flow. After POC load calibration, DOC load is finally calibrated. In the present study, we used limited sediment data to calibrate sediment related parameters to reduce the uncertainty of predicting POC which is closely associate with sediment generation, transport, and deposition from the uplands to the watershed outlet.

We used the Sequential Uncertainty Fitting algorithm version 2 (SUFI-2) method in SWAT-CUP [70] to conduct auto-calibration for monthly flow rate and POC and DOC loads. We used the global sensitivity analysis method for sensitivity analysis. The global sensitivity analysis approach is a multiple regression system given as:

$${\text{g}} =\upalpha + \mathop \sum \limits_{i = 1}^{m} \beta_{i} \cdot b_{i}$$
(6)

where g is the objective function value, α and βi are regression coefficients, bi is the calibrated value of the ith parameter, and m is the number of parameters considered. We employed the Nash–Sutcliffe coefficient-NS [71] as the objective function (g = NS) because it is a commonly used goodness-of-fit coefficient in hydrologic modeling studies. Further, model performance evaluation criteria have been established by Moriasi, Arnold [72] for the NS metric. A student t-test was used to quantify the statistical significance of each parameter, with a p-value < 0.05 indicating a parameter as sensitive in the present study. We also provided parameter sensitivity rankings based on p-value for additional sensitivity analysis.

Model performance evaluation

Two widely-used statistical criteria, i.e., percent bias (Pbias) and NS, are used for model evaluation and given as:

$$P_{bias} = 100 \cdot \frac{{\left( {O_{avg} - P_{avg} } \right)}}{{O_{avg} }}$$
(7)
$$NS = 1 - \frac{{\mathop \sum \nolimits_{i = 1}^{n} (O_{i} - P_{i} )^{2} }}{{\mathop \sum \nolimits_{i = 1}^{n} (O_{i} - O_{avg} )^{2} }}$$
(8)

where Oi and Pi are the observed and predicted values, and Oavg and Pavg are the average of the observed and predicted values, respectively.

Results and discussion

Model performance and sensitive analysis

Calibrated parameter values with respect to the three water quantity and quality variables in the study watershed are shown in Table 1. Model performance for simulation of monthly flow rate and POC and DOC loads as indicated by NS and Pbias during calibration and validation are shown in Table 2. Because there is no established criteria for model performance evaluation for POC and DOC, we assumed the widely-accepted criteria for nitrogen (N) and phosphorus (P) loads from Moriasi, Arnold [72] were applicable to POC and DOC. As a result, model simulation can be judged as satisfactory if NS > 0.50 at a monthly time step, while − 25% < Pbias < 25% for streamflow and − 70% < Pbias < 70% for POC and DOC regardless of simulation time step [72].

Table 2 Model performance on monthly flow rate and POC and DOC loads in the study watershed

In general, the calibration results demonstrate satisfactory model performance for the three water quantity and quality variables based on two statistics during both calibration and validation (Table 2). Model performance for streamflow during validation was slightly better than that during calibration. In contrast, model performance for POC and DOC loads during calibration was slightly better than that during validation (Table 2). We also found that POC and DOC loads were underestimated during validation compared with calibration results (as indicated by positive Pbias values). This is understandable because only 2 years of water quality data were used for calibration which may not sufficiently account for different hydroclimatic and management conditions.

Simulated vs. observed monthly flow rate and POC and DOC loads are shown in Fig. 3 during calibration and validation. In general, simulated monthly variation of streamflow and POC and DOC loads matched observations well. The results were consistent with the previous study conducted in the same watershed with only 2 years of measurement [36]. As that study pointed out, the SWAT-C model tended to underestimate some high flows which were dominated by surface runoff in the watershed. It has been widely reported that the SWAT model tends to underestimate surface runoff especially under wet conditions [73, 74]. Not surprisingly, peak DOC and POC loads were also underestimated (Fig. 3c) because of the dependency of DOC and POC fluxes on streamflow [35].

Fig. 3
figure 3

Simulated vs. observed monthly flow rate (a) and POC (b) and DOC (c) loads during calibration and validation in the Tuckahoe Watershed

Since we only have 37 daily sediment load data during 2014-2017, we calibrated sediment-related parameters at the daily time step (Table 1), and the simulation vs. observation result is shown in Fig. 4. Note that we did not conduct calibration and validation for sediment in the same manner for flow rate, POC, and DOC because of limited data points. The simulated sediment loads explained about 40% of the variation in the observed data (R2 = 39%) and the regression line between simulation and observation was very close to 1:1 line indicating acceptable model performance (Fig. 4). The purpose of calibrating sediment-related parameters is to reduce POC prediction uncertainty mainly due to two major processes: (1) POC mobilization and transport from the uplands by erosion and (2) POC resuspension from sediments of riverbed. Sediment-related parameters controlling the former include USLE_K, USLE_P, and ADJ_PKR, and parameters controlling the latter include PRF, SPCON, and SPEXP (Table 1). Auto-calibration method (SUFI-2) was initially used to calibrate daily sediment loads by adjusting values of these six parameters. The calibrated values of USLE_K, USLE_P, and ADJ_PKR were significantly lower than default values indicating less sediment yields from the uplands. However, subsequent POC calibration generated unrealistic values of POC enrichment ratio (ERPOC > 3.5) and settling velocities for LPOC and RPOC (Vlpoc and Vppoc < 0.01 m day−1) which indicates underestimation of terrestrial POC. As a result, we adopted default values for upland sediment-related parameters and only calibrated main channel parameters (Table 1). The result suggests that soil erosion processes have significant impacts on POC generation and transport on the uplands, and simultaneous calibration of sediment and POC are recommended.

Fig. 4
figure 4

Simulated vs. observed daily sediment loads during 2014–2017 in the Tuckahoe Watershed (including 37 observed data points)

Using the global sensitivity analysis approach only reveals the “partial truth” about parameter sensitivity since it provides relative sensitivity about certain parameters. However, the relative parameter sensitivity provides valuable information on the relative importance of different physical and biogeochemical processes within the whole system. This analysis improves our understanding of the model performance as well as the underlying physical processes. Thus, we conducted parameter sensitivity analyses to investigate the relative importance of POC settling and resuspension processes in the TW (Table 3). Three sediment deposition and resuspension parameters related to C resuspension processes in a reach segment are the peak rate adjustment factor (PRF) and the linear and exponential calibration parameters (SPCON and SPEXP, respectively). Sensitivity analysis results indicated that the two most sensitive parameters were Vlpoc and Vrpoc with p-values less than 0.05 indicating significant sensitivity to POC load, while other sediment-related parameters had insignificant impacts (with p-value > 0.05). The results suggest that parameters that regulate POC deposition are more sensitive than those determining POC resuspension from sediments indicating the dominance of POC settling processes in the watershed.

Table 3 Sensitivity analysis of POC deposition and C resuspension parameters to POC loads

Analyzing riverine POC and DOC fluxes and stocks

Averaged annual POC and DOC fluxes from terrestrial to aquatic environments (including fluxes from uplands, buried in sediments, outflow at the outlet, and deposition/resuspension) in the study watershed are summarized over 2014–2017 (Table 4). In general, POC in riverine environments mainly originates from two sources including erosion of soil organic carbon and autochthonous production, which vary with distance from the headwaters, land use types, and hydrological conditions [75]. For the TW, model simulated average annual POC fluxes derived from various land use types (allochthonous sources) was about 36.6 kgC ha−1 year−1 during 2014–2017 at the watershed scale. In comparison, POC fluxes originating from river systems (autochthonous sources) was about 0.05 kgC ha−1 year−1 which is negligible. These results are consistent with the conclusion that soil erosion plays a dominant role in POC export [76]. Although it was estimated that autochthonous production provides approximately 8–28% of POC in large rivers [77, 78], for a small headwater watershed such as the TW, it is reasonable that POC from allochthonous sources dominates.

Table 4 Average annual POC and DOC fluxes from terrestrial to aquatic environments in the study watershed summarized over 2014-2017

About 24.5 kgC ha−1 year−1 POC leaves the outlet of the TW, which accounts for 67% of total POC from the uplands to the rivers (Table 4). Net deposition (equal to deposition–resuspension) of POC on the sediment bed was about 11.4 kgC ha−1 year−1 which accounted for 31% of total POC coming from the uplands. More detailed breakdown numbers are: 11.44 kgC ha−1 year−1 POC deposited and 0.04 kgC ha−1 year−1 POC resuspended. The resuspended POC only accounted for 0.4% of total deposited POC in the watershed confirming the conclusion from sensitivity analysis that the POC settling rather than C resuspension is the dominating C cycling process in the TW. We also found that net deposition of POC represents 47% of POC fluxes exported from the watershed, indicating the very important role of POC deposition for aquatic carbon fluxes. Annual POC export from the watershed is also within the reported values for forested and agricultural watersheds from literatures [79,80,81]

For DOC, about 46 kgC ha−1 year−1 was exported annually from the uplands via surface and subsurface water flow to the watershed river system, and about 0.72 kgC ha−1 year−1 was generated within the river system, which is less than 2% of the amount generated from the uplands (Table 4). Simulation results indicate the majority of DOC loads originated from terrigenous sources in the study watershed which is consistent with conclusions from many other studies [82, 83]. This result agrees with POC and confirms the argument that the dominant source of DOC and POC to most rivers is of terrestrial origin [84]. Previous studies with similar climate to our study estimated 10 kgC ha−1 year−1 DOC export from a small forested watershed (12 ha) [81] and more than 22 kgC ha−1 year−1 DOC export (based on only two extreme storms within 1 year) from a small agricultural watershed (21 ha) [85], which are consistent with our estimated average annual DOC export from the TW which is a mixed land use watershed with about 54% agriculture lands and 33% forestry lands.

About 46.3 kgC ha−1 year−1 of DOC was transported to the outlet of the watershed. DOC could be lost by mineralization (DOC converted to DIC), and its concentration in the river system could increase as a result of algae mortality and POC dissolution (Fig. 1). Simulation results show that most DOC comes from uplands and indigenously generated DOC was lost from the watershed and caused marginal changes to DOC concentration during the study period. The estimated annual DOC export from the watershed is also within the range of 10 to 100 kgC ha−1 year−1 reported in a review of 40 catchments worldwide by Hope, Billett [86]. The higher ratio of POC to DOC fluxes at the outlet of the watershed compared with that from the uplands was mainly caused by net deposition of POC on the sediment bed. In addition, the result is consistent with the general conclusion that organic C exported from terrestrial to aquatic environments has a high percentage of DOC [84, 87].

Estimation of burial C

Average annual burial C was estimated to be about 0.34 kgC ha−1 year−1 during 2014–2017 in the study watershed, which accounted for about 0.9% of POC fluxes from uplands, 1.4% of POC transported to the outlet, or 3% of net POC deposition, respectively (Table 4). Compared with studies in lakes and coastal environments, the annual C burial rates in this study watershed were considerably smaller [88,89,90,91,92]. One possible reason is that the value for burial rate used in the sediment diagenesis model is lower than those used in other studies. For example, the default burial velocity for CE-QUAL-W2 [30] is 0.001 m day−1 while the value adopted here is 6.85E−06 m day−1 [37]. Considering the large range of burial velocities reported in inland waters and coastal environments [93,94,95], we could expect large uncertainty regarding estimation of buried C at the watershed scale without observed data.

Quantification of the benthic carbon cycle processes

To illustrate the importance of benthic carbon cycle processes, we summarized major components of sediment C fluxes over the riverbed in the TW as shown in Fig. 5, including total organic C deposited on the river bed, resuspension C, burial C, and total inorganic C lost from the sediment (equal to CH4 + CO2 through diffusion and bubbling processes). The percentages of resuspended C, burial C, total inorganic C lost, and accumulated sediment C in total organic C deposited on the riverbed (%) are also shown in Fig. 6. In general, total organic C (including terrestrial POC and algae debris) deposited on sediment bed was about 11.5 kgC ha−1 year−1 (accounting for about 47% of outflow POC) over the 4 years in the TW. About 0.04 and 0.34 kgC ha−1 year−1 organic C were resuspended into the overlying water column and buried out of the sediment system, respectively, accounting for 0.35 and 3% of total deposited organic C in the TW. Combined CH4 and CO2 transport from sediment to the overlying water column was 9.05 kgC ha−1 year−1 (equal to 0.85 gC m−2 day−1 over the water surface area) accounting for 79% of total deposited organic C (Fig. 5), indicating that most of deposited organic C were converted into CO2 + CH4 in the sediment. These results are comparable to numerical simulation results from Di Toro [59] and observations in the Upper Potomac Estuary [59, 96]. By subtracting C losses from the total deposited C in the sediment, about 2.02 kgC ha−1 year−1 (accumulated sediment C) remained on the riverbed, which accounted for 18% of total deposited organic C. Simulation results indicate that a large portion of deposited organic C was converted to inorganic C in the sediment and released into the overlying water column. The release of CO2 and CH4 fluxes will result in elevated concentration of CO2 and CH4 in the water column and critical sources to atmospheric greenhouse gases. Quantification of CO2 and CH4 outgassing from inland waters is an important step to fill the gaps in the C budget at the regional or global scale. The result demonstrates the importance of quantification of sediment fluxes for constraining C cycles in aquatic ecosystems and sediment diagenesis processes in water quality modeling. Future development of SWAT-C will include CH4 and CO2 transformation and transfer processes in the water column and at the water–air interface.

Fig. 5
figure 5

Benthic carbon cycle fluxes for the TW from 2014 to 2017. Unit: kg ha−1 year−1

Fig. 6
figure 6

Benthic carbon cycle budget for the TW from 2014 to 2017. The figure also includes percentage of inorganic C (CO2 + CH4), burial C, resuspension C, and accumulated C fluxes in the total deposited organic C flux in TW

Conclusion

This study developed a sediment diagenesis and sediment carbon (C) resuspension module within the framework of the SWAT-C model to improve the simulation of riverine organic C cycling. The new version of SWAT-C was tested for simulating both particulate organic C (POC) and dissolved organic C (DOC) fluxes against 4 years of monthly observations (2014–2017) in a small watershed, i.e., the Tuckahoe watershed (TW) in the U.S. Mid-Atlantic region. Evaluated with the two statistical metrics (i.e., percent bias and the Nash–Sutcliffe coefficient), the SWAT-C model satisfactorily simulated monthly POC and DOC fluxes during both calibration and validation. We also conducted sensitivity analyses for parameters that regulate POC settling and sediment C resuspension. The results show that POC deposition parameters tended to be more sensitive than parameters associated with C resuspension, suggesting that POC settling processes were the main factors controlling POC fate in the study watershed.

Based on simulation results, we summarized and analyzed average annual POC and DOC, and fluxes from terrestrial to aquatic environments (including fluxes from uplands, buried in sediments, outflow at the outlet, and deposition/resuspension) in the TW. We found that annual POC and DOC fluxes were about 36.6 and 46 kgC ha−1 from allochthonous sources and both were less than 0.72 kgC ha−1 from autochthonous sources (< 2% of allochthonous sources) in the river system. Simulation results show that net deposition (equal to deposition–resuspension) of POC on the sediment bed was 11.4 kgC ha−1 year−1 which accounts for 31% of total POC coming from uplands. In addition, average annual buried C in the sediment bed of the watershed was 0.34 kgC ha−1 year−1 accounting for 1% of POC fluxes from uplands and 3% of net POC deposition. We further quantified sediment C fluxes by summarizing inputs to, and losses from, the sediment in the TW. Results indicate that a large portion (about 79%) of deposited organic C was converted to inorganic C (CH4 and CO2) in the sediment and eventually released into the overlying water column. We also confirmed that there is considerable uncertainty regarding estimation of buried C at the watershed scale due to the large range of burial velocities reported in inland waters and coastal environments.

This study serves as an exploratory study on estimation of C fluxes from terrestrial to aquatic environments at the watershed scale. We demonstrated capabilities of the SWAT-C model to simulate C cycling from uplands to riverine ecosystems and simulation results showed that the newly developed SWAT-C model can be used to simulate C sinks and sources in aquatic environments. Given the importance of sediment diagenesis processes, the results point to the need of future development of the SWAT-C model to includes a water column CH4 module, gas aeration (CO2, CH4, and O2) algorithms, and a total inorganic C cycling module. The SWAT-C model will be a useful tool to inform C related ecosystem services for watershed assessment and planning.

Availability of data and materials

The observed riverine particulate and dissolved organic carbon data are provided in Fig. 3.

Abbreviations

ADJ_PKR:

Peak rate adjustment factor in tributary channels

ALPHA_BF:

Baseflow alpha factor

C:

Carbon

CBP:

Chesapeake Bay Program

CDL:

Cropland Data Layer

CN2:

Curve number

CRW:

Choptank River Watershed

DOC:

Dissolved organic carbon

ESCO:

Soil evaporation compensation factor

GW_DELAY:

Groundwater delay

NASA:

National Astronautics and Space Administration

NASS:

National Agriculture Statistics Service

NLDAS2:

North-American Land Data Assimilation System 2

NRCS:

Natural Resources Conservation Service

POC:

Particulate Organic Carbon

PRF:

Peak rate adjustment factor in main channels

SFTMP:

Snowfall temperature

SLSOIL:

Slope length for lateral flow

SOD:

Sediment oxygen demand

SPCON:

Linear parameter for sediment routing in main channels

SPEXP:

Exponent parameter for sediment routing in main channels

SSURGO:

Survey Geographic Database

SURLAG:

Surface runoff lag coefficient

SWAT:

Soil and Water Assessment Tool

TIC:

Total inorganic carbon

TW:

Tuckahoe watershed

USDA:

United States Department of Agriculture

USEPA:

United States Environmental Protection Agency

USGS:

United States Geological Survey

USLE:

Universal soil loss equation

References

  1. Butman D, Stackpoole S, Stets E, McDonald CP, Clow DW, Striegl RG. Aquatic carbon cycling in the conterminous United States and implications for terrestrial carbon accounting. Proc Natl Acad Sci. 2016;113(1):58–63.

    CAS  Google Scholar 

  2. Regnier P, Friedlingstein P, Ciais P, Mackenzie FT, Gruber N, Janssens IA, et al. Anthropogenic perturbation of the carbon fluxes from land to ocean. Nat Geosci. 2013;6(8):597.

    CAS  Google Scholar 

  3. Aufdenkampe AK, Mayorga E, Raymond PA, Melack JM, Doney SC, Alin SR, et al. Riverine coupling of biogeochemical cycles between land, oceans, and atmosphere. Front Ecol Environ. 2011;9(1):53–60.

    Google Scholar 

  4. Tranvik LJ, Downing JA, Cotner JB, Loiselle SA, Striegl RG, Ballatore TJ, et al. Lakes and reservoirs as regulators of carbon cycling and climate. Limnol Oceanogr. 2009;54(6part2):2298–314.

    CAS  Google Scholar 

  5. Drake TW, Raymond PA, Spencer RG. Terrestrial carbon inputs to inland waters: a current synthesis of estimates and uncertainty. Limnol Oceanogr Lett. 2018;3(3):132–42.

    CAS  Google Scholar 

  6. Ciais P, Sabine C, Bala G, Bopp L, Brovkin V, Canadell J, et al. Carbon and other biogeochemical cycles. Cambridge: Cambridge University Press; 2013.

    Google Scholar 

  7. Tranvik LJ, Downing JA, Cotner JB, Loiselle SA, Striegl RG, Ballatore TJ, et al. Lakes and reservoirs as regulators of carbon cycling and climate. Limnol Oceanogr. 2009;54:2298–314.

    CAS  Google Scholar 

  8. Wehrli B. Conduits of the carbon cycle. Nature. 2013;503:9–10.

    Google Scholar 

  9. Stallard RF. Terrestrial sedimentation and the carbon cycle: coupling weathering and erosion to carbon burial. Glob Biogeoch. 1998;12:231–57.

    CAS  Google Scholar 

  10. Mendonça R, Müller RA, Clow D, Verpoorter C, Raymond P, Tranvik LJ, et al. Organic carbon burial in global lakes and reservoirs. Nat Commun. 2017;8(1):1694.

    Google Scholar 

  11. Sawakuchi HO, Neu V, Ward ND, Barros MdLC, Valerio AM, Gagne-Maynard W, et al. Carbon dioxide emissions along the lower Amazon River. Front Mar Sci. 2017;4:76.

    Google Scholar 

  12. Raymond PA, Hartmann J, Lauerwald R, Sobek S, McDonald C, Hoover M, et al. Global carbon dioxide emissions from inland waters. Nature. 2013;503(7476):355.

    CAS  Google Scholar 

  13. Cole JJ, Prairie YT, Caraco NF, McDowell WH, Tranvik LJ, Striegl RG, et al. Plumbing the global carbon cycle: integrating inland waters into the terrestrial carbon budget. Ecosystems. 2007;10(1):172–85.

    Google Scholar 

  14. Bastviken D, Tranvik LJ, Downing JA, Crill PM, Enrich-Prast A. Freshwater methane emissions offset the continental carbon sink. Science. 2011;331(6013):50.

    CAS  Google Scholar 

  15. Richey JE, Melack JM, Aufdenkampe AK, Ballester VM, Hess LL. Outgassing from Amazonian rivers and wetlands as a large tropical source of atmospheric CO 2. Nature. 2002;416(6881):617.

    CAS  Google Scholar 

  16. Billett M, Moore T. Supersaturation and evasion of CO2 and CH4 in surface waters at Mer Bleue peatland, Canada. Hydrol Process Int J. 2008;22(12):2044–54.

    CAS  Google Scholar 

  17. Ciais P, Borges A, Abril G, Meybeck M, Folberth G, Hauglustaine D, et al. The impact of lateral carbon fluxes on the European carbon balance. Biogeosciences. 2008;5(5):1259–71.

    CAS  Google Scholar 

  18. Ciais P, Sabine C, Bala G, Bopp L, Brovkin V, Canadell J, et al. Carbon and other biogeochemical cycles. Climate change 2013: the physical science basis. Contribution of working group i to the fifth assessment report of the intergovernmental panel on climate change. Cambridge: Cambridge University Press; 2013. p. 465–570.

  19. Bicknell BR, Imhoff JC, Kittle Jr JL, Jobes TH, Donigian Jr AS, Johanson R. Hydrological simulation program-Fortran: HSPF version 12 user’s manual. AQUA TERRA Consultants, Mountain View, California; 2001. p. 845.

  20. Leonard R, Knisel W, Still D. GLEAMS: groundwater loading effects of agricultural management systems. Trans ASAE. 1987;30(5):1403–18.

    Google Scholar 

  21. Laflen JM, Lane LJ, Foster GR. WEPP: a new generation of erosion prediction technology. J Soil Water Conserv. 1991;46(1):34–8.

    Google Scholar 

  22. Young RA, Onstad C, Bosch D, Anderson W. AGNPS: a nonpoint-source pollution model for evaluating agricultural watersheds. J Soil Water Conserv. 1989;44(2):168–73.

    Google Scholar 

  23. Smith RA, Schwarz GE, Alexander RB. Regional interpretation of water-quality monitoring data. Water Resour Res. 1997;33(12):2781–98.

    CAS  Google Scholar 

  24. Arnold JG, Srinivasan R, Muttiah RS, Williams JR. Large area hydrologic modeling and assessment part I: model development. JAWRA J Am Water Resour Assoc. 1998;34(1):73–89.

    CAS  Google Scholar 

  25. Sun P, Wu Y, Xiao J, Hui J, Hu J, Zhao F, et al. Remote sensing and modeling fusion for investigating the ecosystem water-carbon coupling processes. Science Total Environ. 2019;697:134064.

    CAS  Google Scholar 

  26. Zhao F, Wu Y, Yao Y, Sun K, Zhang X, Winowiecki L, et al. Predicting the climate change impacts on water-carbon coupling cycles for a loess hilly-gully watershed. J Hydrol. 2020;581:124388.

    Google Scholar 

  27. Chapra SC, Pelletier G, Tao H. QUAL2K: a modeling framework for simulating river and stream water quality: Documentation and users manual. Medford: Civil and Environmental Engineering Dept, Tufts University; 2003. p. 121.

    Google Scholar 

  28. Wool TA, Ambrose RB, Martin JL, Comer EA, Tech T. Water quality analysis simulation program (WASP). User’s Manual, Version; 2006. p. 6.

  29. Hamrick JM. User’s manual for the environmental fluid dynamics computer code. Gloucester Point: Virginia Institute of Marine Science, College of William and Mary; 1996.

    Google Scholar 

  30. Cole TM, Wells SA. CE-QUAL-W2: a two-dimensional, laterally averaged, hydrodynamic and water quality model, version 3.5; 2006.

  31. Knightes CD, Ambrose RB Jr, Avant B, Han Y, Acrey B, Bouchard DC, et al. Modeling framework for simulating concentrations of solute chemicals, nanoparticles, and solids in surface waters and sediments: WASP8 Advanced Toxicant Module. Environ Model Softw. 2019;111:444–58.

    Google Scholar 

  32. Zhang X, Izaurralde RC, Arnold JG, Williams JR, Srinivasan R. Modifying the soil and water assessment tool to simulate cropland carbon flux: model development and initial evaluation. Sci Total Environ. 2013;463:810–22.

    Google Scholar 

  33. Zhang X. Simulating eroded soil organic carbon with the SWAT-C model. Environ Model Softw. 2018;102:39–48.

    Google Scholar 

  34. Yang Q, Zhang X. Improving SWAT for simulating water and carbon fluxes of forest ecosystems. Sci Total Environ. 2016;569:1478–88.

    Google Scholar 

  35. Du X, Zhang X, Mukundan R, Hoang L, Owens EM. Integrating terrestrial and aquatic processes toward watershed scale modeling of dissolved organic carbon fluxes. Environ Pollut. 2019;249:125–35.

    CAS  Google Scholar 

  36. Qi J, Du X, Zhang X, Lee S, Wu Y, Deng J, et al. Modeling riverine dissolved and particulate organic carbon fluxes from two small watersheds in the northeastern United States. Environ Model Softw. 2019;124:104601.

    Google Scholar 

  37. Chapra S, Pelletier G, Tao Lu H. QUAL2K: a modeling framework for simulating river and stream water quality, version 2.11: documentation and users manual; 2008.

  38. Dadi T, Wendt-Potthoff K, Koschorreck M. Sediment resuspension effects on dissolved organic carbon fluxes and microbial metabolic potentials in reservoirs. Aquat Sci. 2017;79(3):749–64.

    CAS  Google Scholar 

  39. Tengberg A, Almroth E, Hall P. Resuspension and its effects on organic carbon recycling and nutrient exchange in coastal sediments: in situ measurements using new experimental technology. J Exp Mar Biol Ecol. 2003;285:119–42.

    Google Scholar 

  40. Wainright S, Hopkinson C Jr. Effects of sediment resuspension on organic matter processing in coastal environments: a simulation model. J Mar Syst. 1997;11(3–4):353–68.

    Google Scholar 

  41. Di Toro DM, Paquin PR, Subburamu K, Gruber DA. Sediment oxygen demand model: methane and ammonia oxidation. J Environ Eng. 1990;116(5):945–86.

    Google Scholar 

  42. Zhang Z, Sun B, Johnson BE. Integration of a benthic sediment diagenesis module into the two dimensional hydrodynamic and water quality model–CE-QUAL-W2. Ecol Model. 2015;297:213–31.

    CAS  Google Scholar 

  43. Ji Z-G. Hydrodynamics and water quality: modeling rivers, lakes, and estuaries. Hoboken: John Wiley & Sons; 2017.

    Google Scholar 

  44. Qi J, Li S, Jamieson R, Hebb D, Xing Z, Meng F-R. Modifying SWAT with an energy balance module to simulate snowmelt for maritime regions. Environ Model Softw. 2017;93:146–60.

    Google Scholar 

  45. Qi J, Li S, Yang Q, Xing Z, Meng F-R. SWAT setup with long-term detailed landuse and management records and modification for a micro-watershed influenced by freeze-thaw cycles. Water Resour Manage. 2017;31(12):3953–74.

    Google Scholar 

  46. Srinivasan R, Zhang X, Arnold J. SWAT ungauged: hydrological budget and crop yield predictions in the Upper Mississippi River Basin. Trans ASABE. 2010;53(5):1533–46.

    CAS  Google Scholar 

  47. Zhang X, Srinivasan R, Debele B, Hao F. Runoff simulation of the headwaters of the Yellow River using the SWAT model with three snowmelt algorithms. JAWRA J Am Water Resour Assoc. 2008;44(1):48–61.

    Google Scholar 

  48. Abbaspour KC, Vaghefi SA, Srinivasan R. A guideline for successful calibration and uncertainty analysis for soil and water assessment: a review of papers from the 2016 international SWAT conference. Multidisciplinary Digital Publishing Institute; 2017.

  49. Qi J, Zhang X, Wang Q. Improving hydrological simulation in the Upper Mississippi River Basin through enhanced freeze-thaw cycle representation. J Hydrol. 2019;571:605–18.

    Google Scholar 

  50. Li Q, Qi J, Xing Z, Li S, Jiang Y, Danielescu S, et al. An approach for assessing impact of land use and biophysical conditions across landscape on recharge rate and nitrogen loading of groundwater. Agric Ecosyst Environ. 2014;196:114–24.

    CAS  Google Scholar 

  51. Qi J, Li S, Bourque CP, Xing Z, Fan-Rui M. Developing a decision support tool for assessing land use change and BMPs in ungauged watersheds based on decision rules provided by SWAT simulation. Hydrol Earth Syst Sci. 2018;22(7):3789–806.

    CAS  Google Scholar 

  52. Zhang C, Li S, Qi J, Xing Z, Meng F. Assessing impacts of riparian buffer zones on sediment and nutrient loadings into streams at watershed scale using an integrated REMM-SWAT model. Hydrol Process. 2017;31(4):916–24.

    Google Scholar 

  53. Liang K, Qi J, Liu E, Jiang Y, Li S, Meng F-R. Estimated potential impacts of soil and water conservation terraces on potato yields under different climate conditions. J Soil Water Conserv. 2019;74(3):225–34.

    Google Scholar 

  54. Betrie GD, Mohamed YA, Griensven AV, Srinivasan R. Sediment management modelling in the Blue Nile Basin using SWAT model. Hydrol Earth Syst Sci. 2011;15(3):807–18.

    Google Scholar 

  55. Bracmort KS, Arabi M, Frankenberger J, Engel BA, Arnold JG. Modeling long-term water quality impact of structural BMPs. Trans ASABE. 2006;49(2):367–74.

    CAS  Google Scholar 

  56. Ficklin DL, Luo Y, Luedeling E, Zhang M. Climate change sensitivity assessment of a highly agricultural watershed using SWAT. J Hydrol. 2009;374(1–2):16–29.

    CAS  Google Scholar 

  57. Zhao F, Wu Y, Wang L, Liu S, Wei X, Xiao J, et al. Multi-environmental impacts of biofuel production in the US Corn Belt: a coupled hydro-biogeochemical modeling approach. J Clean Prod. 2020;251:119561.

    CAS  Google Scholar 

  58. Parton WJ, Ojima DS, Cole CV, Schimel DS. A general model for soil organic matter dynamics: sensitivity to litter chemistry, texture and management. Quant Model Soil Form Proces. 1994;39:147–67.

    CAS  Google Scholar 

  59. Di Toro DM. Sediment flux modeling. New York: Wiley; 2001.

    Google Scholar 

  60. Di Toro D, Fitzpatrick J. Chesapeake Bay sediment flux model. Tech. Report EL-93-2; 1993.

  61. Lee S, Yeo I-Y, Sadeghi AM, McCarty GW, Hively WD, Lang MW. Impacts of watershed characteristics and crop rotations on winter cover crop nitrate-nitrogen uptake capacity within agricultural watersheds in the Chesapeake Bay region. PLoS ONE. 2016;11(6):e0157637.

    Google Scholar 

  62. Hively W, Lang M, McCarty G, Keppler J, Sadeghi A, McConnell L. Using satellite remote sensing to estimate winter cover crop nutrient uptake efficiency. J Soil Water Conserv. 2009;64(5):303–13.

    Google Scholar 

  63. Ator SW, Denver JM, Krantz DE, Newell WL, Martucci SK. A surficial hydrogeologic framework for the Mid-Atlantic Coastal Plain. Reston: US Geological Survey; 2005.

    Google Scholar 

  64. Yeo I-Y, Lee S, Sadeghi AM, Beeson PC, Hively WD, McCarty GW, et al. Assessing winter cover crop nutrient uptake efficiency using a water quality simulation model. Hydrol Earth Syst Sci. 2014;18(12):5239.

    Google Scholar 

  65. Xia Y, Mitchell K, Ek M, Sheffield J, Cosgrove B, Wood E, et al. Continental-scale water and energy flux analysis and validation for the North American Land Data Assimilation System project phase 2 (NLDAS-2): 1. Intercomparison and application of model products. J Geophys Res Atmos. 2012. https://doi.org/10.1029/2011JD016048.

    Article  Google Scholar 

  66. Qi J, Wang Q, Zhang X. On the use of NLDAS2 weather data for hydrologic modeling in the Upper Mississippi River Basin. Water. 2019;11(5):960.

    Google Scholar 

  67. Avagyan A, Runkle BR, Kutzbach L. Application of high-resolution spectral absorbance measurements to determine dissolved organic carbon concentration in remote areas. J Hydrol. 2014;517:435–46.

    CAS  Google Scholar 

  68. Olson M, Malone M, Ley M. Guide to using Chesapeake Bay program water quality monitoring data. MD, Chesapeake Bay Program: M Mallonee Annapolis; 2012.

    Google Scholar 

  69. Qi J, Lee S, Zhang X, Yang Q, McCarty GW, Moglen GE. Effects of surface runoff and infiltration partition methods on hydrological modeling: a comparison of four schemes in two watersheds in the Northeastern US. J Hydrol. 2020;581:124415.

    Google Scholar 

  70. Abbaspour K, Vejdani M, Haghighat S, editors. SWAT-CUP calibration and uncertainty programs for SWAT. In: MODSIM 2007 International Congress on Modelling and Simulation, Modelling and Simulation Society of Australia and New Zealand; 2007.

  71. Nash J, Sutcliffe J. River flow forecasting through conceptual models part I—a discussion of principles. J Hydrol. 1970;10(3):282–90.

    Google Scholar 

  72. Moriasi DN, Arnold JG, Van Liew MW, Bingner RL, Harmel RD, Veith TL. Model evaluation guidelines for systematic quantification of accuracy in watershed simulations. Trans ASABE. 2007;50(3):885–900.

    Google Scholar 

  73. Qi J, Zhang X, McCarty GW, Sadeghi AM, Cosh MH, Zeng X, et al. Assessing the performance of a physically-based soil moisture module integrated within the Soil and Water Assessment Tool. Environ Model Softw. 2018;109:329–41.

    Google Scholar 

  74. Mapfumo E, Chanasyk DS, Willms WD. Simulating daily soil water under foothills fescue grazing with the soil and water assessment tool model (Alberta, Canada). Hydrol Process. 2004;18(15):2787–800.

    Google Scholar 

  75. Yang Q, Zhang X, Xu X, Asrar GR, Smith RA, Shih J-S, et al. Spatial patterns and environmental controls of particulate organic carbon in surface waters in the conterminous United States. Sci Total Environ. 2016;554:266–75.

    Google Scholar 

  76. Galy V, Peucker-Ehrenbrink B, Eglinton T. Global carbon export from the terrestrial biosphere controlled by erosion. Nature. 2015;521(7551):204.

    CAS  Google Scholar 

  77. Howarth R, Schneider R, Swaney D. Metabolism and organic carbon fluxes in the tidal freshwater Hudson River. Estuaries. 1996;19(4):848–65.

    CAS  Google Scholar 

  78. Veyssy E, Etcheber H, Lin R, Buat-Menard P, Maneux E. Seasonal variation and origin of particulate organic carbon in the lower Garonne River at La Reole (southwestern France). Hydrobiologia. 1998;391(1–3):113–26.

    CAS  Google Scholar 

  79. Jeong JJ, Bartsch S, Fleckenstein JH, Matzner E, Tenhunen JD, Lee SD, et al. Differential storm responses of dissolved and particulate organic carbon in a mountainous headwater stream, investigated by high-frequency, in situ optical measurements. J Geophys Res Biogeosci. 2012. https://doi.org/10.1029/2012JG001999.

    Article  Google Scholar 

  80. Oeurng C, Sauvage S, Coynel A, Maneux E, Etcheber H, Sánchez-Pérez JM. Fluvial transport of suspended sediment and organic carbon during flood events in a large agricultural catchment in southwest France. Hydrol Process. 2011;25(15):2365–78.

    CAS  Google Scholar 

  81. Dhillon GS, Inamdar S. Extreme storms and changes in particulate and dissolved organic carbon in runoff: entering uncharted waters? Geophys Res Lett. 2013;40(7):1322–7.

    CAS  Google Scholar 

  82. Goñi MA, Teixeira MJ, Perkey DW. Sources and distribution of organic matter in a river-dominated estuary (Winyah Bay, SC, USA). Estuar Coast Shelf Sci. 2003;57(5–6):1023–48.

    Google Scholar 

  83. Tesi T, Langone L, Giani M, Ravaioli M, Miserocchi S. Source, diagenesis, and fluxes of particulate organic carbon along the western Adriatic Sea (Mediterranean Sea). Mar Geol. 2013;337:156–70.

    CAS  Google Scholar 

  84. Raymond PA, Bauer JE. Riverine export of aged terrestrial organic matter to the North Atlantic Ocean. Nature. 2001;409(6819):497.

    CAS  Google Scholar 

  85. Caverly E, Kaste JM, Hancock GS, Chambers RM. Dissolved and particulate organic carbon fluxes from an agricultural watershed during consecutive tropical storms. Geophys Res Lett. 2013;40(19):5147–52.

    CAS  Google Scholar 

  86. Hope D, Billett M, Cresser M. A review of the export of carbon in river water: fluxes and processes. Environ Pollut. 1994;84(3):301–24.

    CAS  Google Scholar 

  87. Ludwig W, Probst JL, Kempe S. Predicting the oceanic input of organic carbon by continental erosion. Global Biogeochem Cycles. 1996;10(1):23–41.

    CAS  Google Scholar 

  88. Omengo FO, Geeraert N, Bouillon S, Govers G. Deposition and fate of organic carbon in floodplains along a tropical semiarid lowland river (Tana River, Kenya). J Geophys Res Biogeosci. 2016;121(4):1131–43.

    CAS  Google Scholar 

  89. Gualtieri C, editor. Sediments burial velocity estimation in Venice Lagoon. XXVIII IAHR Congress; 1999.

  90. Hobbs WO, Engstrom DR, Scottler SP, Zimmer KD, Cotner JB. Estimating modern carbon burial rates in lakes using a single sediment sample. Limnol Oceanogr Methods. 2013;11(6):316–26.

    CAS  Google Scholar 

  91. Brunskill G, Zagorskis I, Pfitzner J. Carbon burial rates in sediments and a carbon mass balance for the Herbert River region of the Great Barrier Reef continental shelf, North Queensland, Australia. Estuar Coast Shelf Sci. 2002;54(4):677–700.

    CAS  Google Scholar 

  92. Sun K, Chen X, Dong X, Yang X. Spatiotemporal patterns of carbon sequestration in a large shallow lake, Chaohu Lake: evidence from multiple-core records. Limnologica. 2020;81:125748.

    CAS  Google Scholar 

  93. Boudreau BP. Is burial velocity a master parameter for bioturbation? Geochim Cosmochim Acta. 1994;58(4):1243–9.

    CAS  Google Scholar 

  94. Ruiz CE, Aziz NM, Schroeder PR. RECOVERY: a contaminated sediment-water interaction model. Environ Model Assess. 2001;6(3):151–8.

    Google Scholar 

  95. Mackay D, Diamond M, Stiver W. The case for modeling sediment-water interactions in aquatic and marine systems. Org Subst Sedim Water. 1991;3:43–63.

    Google Scholar 

  96. Boynton WR, Barnes JM, Weaver BJ, Magdeburger L, Sampou P. Sediment-water fluxes and sediment analyses in Chesapeake Bay: tidal fresh potomac river and Maryland Main Stem. Solomons: Maryland Dept of Research and Education Solomons Chesapeake Biological Lab; 1996.

    Google Scholar 

  97. Abbaspour KC. SWAT-CUP 2012: SWAT calibration and uncertainty programs—a user manual. Dübendorf: Eawag; 2013. p. 103.

    Google Scholar 

Download references

Acknowledgements

The authors thank all those that provided the geospatial data for preparing inputs to drive the SWAT-C model (as mentioned in the Data Sources and Methods Section), as well as anonymous reviewers who provided helpful comments on the manuscript. This research was a contribution from the Long-Term Agroecosystem Research (LTAR) network. LTAR is supported by the United States Department of Agriculture.

Funding

The funding support for this project was provided by National Aeronautics and Space Administration (NNH13ZDA001N, NNX17AE66G, and 18-CMS18-0052), the United States Department of Agriculture (2017-67003-26485 and 2017-67003-26484), and the National Science Foundation (1639327). Funding was also provided in part by the United States Department of Agriculture, Natural Resources Conservation Service—Conservation Effects Assessment Project (NRCS-CEAP).

Author information

Authors and Affiliations

Authors

Contributions

JQ incorporated sediment diagenesis and C resuspension code into SWAT-C, performed model calibration and validation, conducted data analyses, and drafted the manuscript. XZ framed the study and provided technical and scientific supervision for model development and manuscript preparation. SL created the SWAT project for the study watershed. YW and GEM discussed the analysis results and helped to prepare the manuscript. GWM collected the riverine carbon data used in this study and provided comments on the technical approach. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Xuesong Zhang.

Ethics declarations

Competing interests

The authors declare that they have no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Qi, J., Zhang, X., Lee, S. et al. Modeling sediment diagenesis processes on riverbed to better quantify aquatic carbon fluxes and stocks in a small watershed of the Mid-Atlantic region. Carbon Balance Manage 15, 13 (2020). https://doi.org/10.1186/s13021-020-00148-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13021-020-00148-1

Keywords