Skip to main content
SpringerLink
Log in

A Study on the Electrochemical Synthesis and Characterization of CuInSe2 Thin Films on Mo and Si Substrates

  • Research Article-Chemistry
  • Published:
Arabian Journal for Science and Engineering Aims and scope Submit manuscript

Abstract

Solar cells based on Cu(In,Ga)Se2 alloys as the absorber layer continue to attract attention in research and industry. In order to reduce production costs, several deposition techniques have been employed, one of which is the electrochemical way. The paper reports on the synthesis in a single bath of low cost electrochemically thin films of the ternary semiconductor compound CuInSe2 without the need to post-annealing treatments. We have studied the optimal parameters required for the electrodeposition of thin films on both molybdenum-coated glass (Mo) and silicon wafer substrates (Si). Metals salts of CuCl2, InCl3 and SeCl4 without added complexing agent were used to prepare close to stoichiometric composition of the chalcopyrite compound CuInSe2. Thin films were electrodeposited at two imposed potentials − 0.4 and − 1 V/SCE. In addition to the electrochemical characterization methods, we have characterized our films using the X-ray diffraction technique (XRD), scanning electron microscope (SEM) and atomic force microscopy (AFM). The results indicate that the best films in terms of elemental composition, structure, crystallite size and morphology have been obtained with the imposed potential of − 1 V/SCE.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Kodigala, S.R.: Thin films and nanostructures Cu(In1−xGax)Se2 based thin film solar cells. Academic Press, Burlington (2010)

    Google Scholar 

  2. http://nrel.gov/pv/assets/best-research-cell-efficiency-records. Accessed 20 November 2019

  3. Green, M.A.; Hishikawa, Y.; Dunlop, E.D.; Levi, D.H.; Hohl-Ebinger, J.; Yoshita, M.; Ho-Baillie, A.W.Y.: Solar cell efficiency tables (Version 53). Prog. Photovolt. Res. Appl. 27, 3–12 (2019)

    Google Scholar 

  4. Bouima, H.; Zegadi, A.; Satour, F.Z.; Zouaoui, A.; Hassam, A.: CuIn(Se, S)2 thin films synthesis and characterization from a single-bath electrodeposition method. J. Electron. Mater. 48, 4099–4106 (2019)

    Google Scholar 

  5. Esmaeili-Zare, M.; Behpour, M.; Zahedifar, M.: Electrodeposition of CIGS nanostructure photovoltaic absorber layers: effect of deposition time. J. Mater. Sci. Mater. Electron. 27, 1645 (2016)

    Google Scholar 

  6. Bhattacharya, R.N.; Oh, M.-K.; Kim, Y.: CIGS-based solar cells prepared from electrodeposited precursor films. Sol. Energy Mater. Sol. Cells 98, 198–202 (2012)

    Google Scholar 

  7. Zhang, L.; Jiang, F.D.; Feng, J.Y.: Formation of CuInSe2 and Cu(In, Ga)Se2 films by electrodeposition and vacuum annealing treatment. Sol. Energy Mater. Sol. Cells 80, 483–490 (2003)

    Google Scholar 

  8. Mandati, S.; Sarada, B.V.; Dey, S.R.; Joshi, S.V.: Pulsed electrochemical deposition of CuInSe2 and Cu(In,Ga)Se2 semiconductor thin films. In: Inguanta, R., Sunseri, C. (eds.) Semiconductors—Growth and Characterization, pp. 109–132. IntechOpen (2018)

  9. Bhattacharya, R.N.: Solution growth and electrodeposited CuInSe2 thin films. J. Electrochem. Soc. 130, 2040–2042 (1983)

    Google Scholar 

  10. Lincot, D.: Electrodeposition of semiconductors. Thin Solid Films 487, 40–48 (2005)

    Google Scholar 

  11. Roussel, O.; Ramdani, O.; Chassaing, E.; Grand, P.-P.; Lamirand, M.; Etcheberry, A.; Kerrec, O.; Guillemoles, J.-F.; Lincot, D.: First stages of CuInSe2 electrodeposition from Cu(II)–In(III)–Se(IV) acidic solutions on polycrystalline Mo films. J. Electrochem. Soc. 155, D141–D148 (2008)

    Google Scholar 

  12. Hodes, G.; Engelhard, T.; Cahen, D.; Kazmerski, L.L.; Herrington, C.R.: Electroplated CuInS2 and CuInSe2 layers: preparation and physical and photovoltaic characterization. Thin Solid Films 128, 93–106 (1985)

    Google Scholar 

  13. Bhattacharya, R.N.; Rajeshwar, K.: Electrodeposition of CuInX (X = Se, Te) thin films. Solar Cells 16, 237–243 (1986)

    Google Scholar 

  14. Pottier, D.; Maurin, G.: Preparation of polycrystalline thin films of CuInSe2 by electrodeposition. J. Appl. Electrochem. 19, 361–367 (1989)

    Google Scholar 

  15. Herrero, J.; Ortega, J.: Electrodeposition of Cu-In alloys for preparing CuInS2 thin films. Sol. Energy Mater. 20, 53–65 (1990)

    Google Scholar 

  16. Al-Bassam, A.A.I.: Electrodeposition of CuInSe2 thin films and their characteristics. Physica B Condens. Matter 266, 192–197 (1999)

    Google Scholar 

  17. Hamrouni, S.; AlKhalifa, M.S.; Boujmil, M.F.; Ben Saad, K.: Preparation and characterization of CuInSe2 electrodeposited thin films annealed in vacuum. Appl. Surf. Sci. 292, 231–236 (2014)

    Google Scholar 

  18. Aksu, S.; Pinarbasi, M.: Electrodeposition of Cu-In-Ga films for the preparation of CIGS solar cells. In: 2010 35th IEEE Photovoltaic Specialists Conference, Honolulu, HI, pp. 794–798 (2010). http://doi.org/10.1109/PVSC.2010.5617115

  19. Bhattacharya, R.N.: CIGS-based solar cells prepared from electrodeposited stacked Cu/In/Ga layers. Sol. Energy Mater. Sol. Cells 113, 96–99 (2013)

    Google Scholar 

  20. Benamrani, H.; Satour, F.Z.; Zegadi, A.; Zouaoui, A.: Photoacoustic spectroscopy analysis of silicon crystals. J. Lum. 132, 305–312 (2012)

    Google Scholar 

  21. Khaniche, B.; Benamrani, H.; Zouaoui, A.; Zegadi, A.: Preparation and properties of the composite material silicon/polypyrrole-copper for electronic devices applications. Mater. Sci. Semicond. Process. 27, 689–694 (2014)

    Google Scholar 

  22. Khaniche, B.; Zouaoui, A.; Zegadi, A.: Structural study and electrochemical deposition of a copper layer on N–Si. Emerging Mater. Res. 9, 1–6 (2020)

    Google Scholar 

  23. Valderrama, R.C.; Miranda-Hernández, M.; Sebastian, P.J.; Ocampo, A.L.: Electrodeposition of indium onto Mo/Cu for the deposition of Cu(In, Ga)Se2 thin films. Electrochim. Acta 53, 3714–3721 (2008)

    Google Scholar 

  24. Lai, Y.; Liu, F.; Zhang, Z.; Liu, J.; Li, Y.; Kuang, S.; Li, J.; Liu, Y.: Cyclic voltammetry study of electrodeposition of Cu(In, Ga)Se2 thin films. Electrochim. Acta 54, 3004–3010 (2009)

    Google Scholar 

  25. Lui, F.-y., Lu, Y., Zhang, Z.-a., Lai, Y.-q., Li, J., Lui, Y.-x.: Pulse-plating electrodeposition and annealing treatment of CuInSe2 films, Trans. Nonferrous Met. Soc. China 18, 884-889 (2008)

  26. Hermann, A.M.; Mansour, M.; Badri, V.; Pinkhasov, B.; Gonzales, C.; Fickett, F.; Calixto, M.E.; Sebastian, P.J.; Marshall, C.H.; Gillespie, T.J.: Deposition of smooth Cu(In, Ga)Se2 films from binary multilayers. Thin Solid Films 361–362, 74–78 (2000)

    Google Scholar 

  27. Sharifirad, M.; Omrani, A.; Rostami, A.A.; Khoshroo, M.: Electrodeposition and characterization of polypyrrole films on copper. J. Electroanal. Chem. 645, 149–158 (2010)

    Google Scholar 

  28. Patterson, A.: The Scherrer formula for X-ray particle size determination. Phys. Rev. 56, 978–982 (1939)

    MATH  Google Scholar 

  29. Borchert, H.; Shevchenko, E.V.; Robert, A.; Mekis, I.; Kornowski, A.; Grübel, G.; Weller, H.: Determination of nanocrystal sizes: a comparison of TEM, SAXS, and XRD studies of highly monodisperse CoPt3 particles. Langmuir 21, 1931–1936 (2005)

    Google Scholar 

  30. Tallapally, V.; Nakagawara, T.A.; Demchenko, D.O.; Özgürb, Ü.; Arachchige, I.U.: Ge1−xSnx alloy quantum dots with composition-tunable energy gaps and near-infrared photoluminescence. Nanoscale 10, 20296 (2018)

    Google Scholar 

Download references

Acknowledgements

The authors acknowledge the support from the Directorate-General for Scientific Research and Technological Development (DGRSDT-Algeria).

Author information

Authors and Affiliations

  1. Laboratoire Croissance et Caractérisation de Nouveaux Semiconducteurs (LCCNS), Université Ferhat Abbas Sétif 1, Sétif, Algeria

    Yassine Haddad, Fatima Zohra Satour, Haithem Bouima, Ahmed Zouaoui & Ameur Zegadi

  2. Laboratoire Systèmes Intelligents (LSI). Département d’Electronique, Faculté de Technologie, Université Ferhat Abbas Sétif 1, 19000, Sétif, Algeria

    Abdelouahab Hassam

Authors
  1. Yassine Haddad
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Fatima Zohra Satour
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Haithem Bouima
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Abdelouahab Hassam
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ahmed Zouaoui
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Ameur Zegadi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ameur Zegadi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Haddad, Y., Satour, F.Z., Bouima, H. et al. A Study on the Electrochemical Synthesis and Characterization of CuInSe2 Thin Films on Mo and Si Substrates. Arab J Sci Eng 46, 301–308 (2021). https://doi.org/10.1007/s13369-020-04734-w

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13369-020-04734-w

Keywords

Search

Navigation