Skip to main content
Log in

Chemical Bonding of Fe3O4 Nanoparticles on the Surface of Poly(acryloyl chloride) Functionalized Multiwalled Carbon Nanotubes

  • Research Paper
  • Published:
Iranian Journal of Science and Technology, Transactions A: Science Aims and scope Submit manuscript

Abstract

Poly(acryloyl chloride) (PAC) was first reacted with oxidized MWCNT to form oxidized MWCNT-g-PAC. Then, aminated MNP were bonded to the oxidized MWCNT-g-PAC to form oxidized MWCNT-g-PAC-g-aminated MNP. The chemical characterization for primary and the product materials was performed using FT-IR spectroscopy. SEM images and SEM–EDX were used for the surface morphology and elemental characterization, respectively. Vibrating sample magnetometer measurements showed that aminated MNP and oxidized MWCNT-g-PAC-g-aminated MNP have magnetic saturation values of 52.07 emu/g and 20.38 emu/g, respectively. Both of the two samples indicated the superparamagnetic nature. TGA measurements were accomplished to compare the thermal stability of materials. Also, the DSC measurements were performed to compare Tg temperatures. While AC conductivity values of the oxidized MWCNT-g-PAC and oxidized MWCNT-g-PAC-g-aminated MNP increased by increasing frequency, it has not changed with increasing temperature. This result indicates that these materials act as electrical insulators.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  • Alimirzalu S, Akbarzadeh A, Abbasian M, Alimohammadi S, Davaran S, Hanifehpour Y et al (2014) Synthesis and study of physicochemical characteristics of Fe3O4 magnetic nanocomposites based on poly(nisopropylacrylamide) for anti-cancer drugs delivery. Asian Pac J Cancer Prev 15:49–54

    Article  Google Scholar 

  • Cao Y (2015) Preparation and magnetic properties of a multi-walled carbon nanotube-iron oxide nanoparticle composite. Fullerenes Nanotubes Carbon Nanostruct 23:623–626

    Article  Google Scholar 

  • Correa-Duarte MA, Grzelczak M, Salgueirino-Maceira V, Giersig M, Liz-Marzan LM, Farle M et al (2005) Alignment of carbon nanotubes under low magnetic fields through attachment of magnetic nanoparticles. J Phys Chem B 109:19060–19063

    Article  Google Scholar 

  • Cunha C, Panseri S, Iannazzo D, Piperno A, Pistone A, Fazio M et al (2012) Hybrid composites made of multiwalled carbon nanotubes functionalized with Fe3O4 nanoparticles for tissue engineering applications. Nanotechnology 23:465102

    Article  Google Scholar 

  • De Oliveira H, Dos Santos M, Dos Santos C, De Melo C (2003) Preparation and electrical and dielectric characterization of PVA/PPY blends. Mater Charact 50:223–226

    Article  Google Scholar 

  • Deng J, Wen X, Wang Q (2012) Solvothermal in situ synthesis of Fe3O4-multi-walled carbon nanotubes with enhanced heterogeneous Fenton-like activity. Mater Res Bull 47:3369–3376

    Article  Google Scholar 

  • Harun MH, Saion E, Kassim A, Hussain MY, Mustafa IS, Omer MAA (2008) Temperature dependence of AC electrical conductivity of PVA-PPy-FeCl3 composite polymer films, Iskandar Shahrim Mustafa2 and Muhd Ahmad Ali Omer2. Malays Polym J 3:24–31

    Google Scholar 

  • Hegab N, El-Mallah H (2009) AC conductivity and dielectric properties of amorphous Te42As36Ge10Si12 Glass. Acta Phys Polon A 116:1048–1152

    Article  Google Scholar 

  • Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354:56–58

    Article  Google Scholar 

  • Kharisov BI, Dias HR, Kharissova OV, Jiménez-Pérez VM, Pérez BO, Flores BM (2012) Iron-containing nanomaterials: synthesis, properties, and environmental applications. RSC Adv 2:9325–9358

    Article  Google Scholar 

  • Kim IT, Tannenbaum A, Tannenbaum R (2011) Anisotropic conductivity of magnetic carbon nanotubes embedded in epoxy matrices. Carbon 49:54–61

    Article  Google Scholar 

  • Kirschvink JL, Jones DS, MacFadden BJ (2013) Magnetite biomineralization and magnetoreception in organisms: a new biomagnetism, vol 5. Springer, Berlin

    Google Scholar 

  • Korneva G, Ye H, Gogotsi Y, Halverson D, Friedman G, Bradley J-C, Kornev KG (2005) Carbon nanotubes loaded with magnetic particles. Nano Lett 5:879–884

    Article  Google Scholar 

  • Mo Z, Zhang C, Guo R, Meng S, Zhang J (2011) Synthesis of Fe3O4 nanoparticles using controlled ammonia vapor diffusion under ultrasonic irradiation. Ind Eng Chem Res 50:3534–3539

    Article  Google Scholar 

  • Mohammadi A, Barikani M (2014) Synthesis and characterization of superparamagnetic Fe3O4 nanoparticles coated with thiodiglycol. Mater Charact 90:88–93

    Article  Google Scholar 

  • Ren X, Chen C, Nagatsu M, Wang X (2011) Carbon nanotubes as adsorbents in environmental pollution management: a review. Chem Eng J 170:395–410

    Article  Google Scholar 

  • Rezay Marand Z, Helmi Rashid Farimani M, Shahtahmasebi N (2014) Study of magnetic and structural and optical properties of Zn doped Fe3O4 nanoparticles synthesized by co-precipitation method for biomedical application. Nanomed J 1:238–247

    Google Scholar 

  • Seckin T, Vural S, Köytepe S (2010) Preparation and structural properties of Fe3O4–polyimide hybrid nanocomposites. Polym Bull 64:115

    Article  Google Scholar 

  • Suwattanamala A, Bandis N, Tedsree K, Issro C (2017) Synthesis, characterization and adsorption properties of Fe3O4/MWCNT magnetic nanocomposites. Mater Today Proc 4:6567–6575

    Article  Google Scholar 

  • Wilson L, Kalu EE, Martin L, McHenry ME (2012) Decoration of carbon nanotubes with iron–cobalt (FeCo) alloy using polymer-stabilization and electroless deposition techniques for thermotherapy applications. J Mater Chem 22:595–601

    Article  Google Scholar 

  • Yang D, Yang F, Hu J, Long J, Wang C, Fu D, Ni Q (2009) Hydrophilic multi-walled carbon nanotubes decorated with magnetite nanoparticles as lymphatic targeted drug delivery vehicles. Chem Commun 29:4447–4449

    Article  Google Scholar 

  • Yin M, Wang M, Miao F, Ji Y, Tian Z, Shen H, Jia N (2012) Water-dispersible multiwalled carbon nanotube/iron oxide hybrids as contrast agents for cellular magnetic resonance imaging. Carbon 50:2162–2170

    Article  Google Scholar 

  • Zhou H, Zhang C, Li H, Du Z (2010) Decoration of Fe3O4 nanoparticles on the surface of poly(acrylic acid) functionalized multi-walled carbon nanotubes by covalent bonding. J Polym Sci Part A Polym Chem 48:4697–4703

    Article  Google Scholar 

  • Zhu L, Zeng X, Chen M, Yu R (2017) Controllable permittivity in 3D Fe3O4/CNTs network for remarkable microwave absorption performances. RSC Adv 7:26801–26808

    Article  Google Scholar 

  • Zilli D, Chiliotte C, Escobar M, Bekeris V, Rubiolo G, Cukierman A, Goyanes S (2005) Magnetic properties of multi-walled carbon nanotube–epoxy composites. Polymer 46:6090–6095

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the Scientific Research Support Fund of The Firat University, Elazıg, Turkey, Project No. (FUBAP FF.15.11).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mustafa Ersin Pekdemir.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Pekdemir, M.E., Coşkun, M. Chemical Bonding of Fe3O4 Nanoparticles on the Surface of Poly(acryloyl chloride) Functionalized Multiwalled Carbon Nanotubes. Iran J Sci Technol Trans Sci 44, 1001–1010 (2020). https://doi.org/10.1007/s40995-020-00912-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40995-020-00912-5

Keywords

Navigation