Abstract
The shaping of axisymmetric parts of uniform thickness such as caps from sheet of variable thickness is considered.
Similar content being viewed by others
REFERENCES
Chumadin, A.S., Improvement of pipe distribution process, Kuznechno-Shtampovochnoe Proizvod., 1990, no. 8, pp. 29–30.
Baburin, M.A., Baskakov, V.D., Tarasov, V.A., and Zarubina, O.V., The evaluation of the maximum degree hood of cylindrical parts from the disk blanks with variable thickness, Kuznechno-Shtampovochnoe Proizvod.–Obrab. Mater. Davleniem, 2015, no. 1, pp. 3–6.
Greditor, M.A., Davitel’nye raboty i rotatsionnoe vydavlivanie (Pressing and Rotary Extrusion), Moscow: Mashinostroenie, 1971.
Popov, O.V., Izgotovlenie tsel’noshtampovannykh tonkostennykh detalei peremennogo secheniya (Production of Whole-Presses Thin-Wall Parts with Variable Section), Moscow: Mashinostroenie, 1974.
Titlyanov, A.E. and Radyuk, A.G., Calculation of sheet blank thickness for axisymmetric molding, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1968, no. 11, pp. 154–155.
Chumadin, A.S. and Ershov, V.I., Axisymmetric molding of bottom-like parts from sheet material, Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., 1988, no. 3, pp. 56–60.
Chumadin, A.S., Teoriya i raschety protsessov listovoi shtampovki (dlya inzhenerov) (Theory and Calculations of Sheet Pressing: For Engineers), Moscow: Mosk. Aviats. Tekhnol. Inst., 2014.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Chumadin, A.S., Shemonaeva, E.S. Producing Parts of Uniform Thickness from Sheet of Variable Thickness. Russ. Engin. Res. 40, 522–525 (2020). https://doi.org/10.3103/S1068798X20060088
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20060088