Skip to main content
SpringerLink
Log in

Theoretical Investigation of the Influence of Combined Machining Modes on the Value and Character of Residual Stresses in the Surface Layer of Cylindrical Friction Pairs

  • RELIABILITY, STRENGTH, WEAR RESISTANCE OF MACHINES AND STRUCTURES
  • Published:
Journal of Machinery Manufacture and Reliability Aims and scope Submit manuscript

Abstract

In this paper, analysis of influence of residual stresses in the surface layer of cylindrical friction pairs on the operational wear resistance index is carried out. Stresses of the first kind after application of combined machining are investigated. Combined machining is consecutive electromechanical machining and diamond burnishing. A formula for calculation of residual stresses originating in the surface layer after the combined machining is obtained. For computational convenience, a computer program calculating the residual stress parameter is written in Visual studio 2017 C#. The combined machining method creates a potential for improving performance indices due to creation of compressive residual stresses.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.

Similar content being viewed by others

REFERENCES

  1. Pozdeev, A.A., Nyashin, Yu.I., and Trusov, P.V., Ostatochnye napryazheniya: teoriya i prilozhenie (Residual Stresses: Theory and Application), Moscow, 1982.

  2. Kosarev, V.A., Azikov, N.S., and Alipov, A.E., A method for solution of physically nonlinear problems of structural strength with stress risers, Aviats. Prom-st', 2014, no. 2, p. 26.

  3. Guo, X., Leung, A.Y.T., Chen, A.Y., Ruan, H.H., and Lu, J., Investigation of non-local cracking in layered stainless steel with nanostructured interface, Scr. Mater., 2010, vol. 63, no. 4, p. 403.

    Article  Google Scholar 

  4. Haghpanah, B., Nayeb-Hashemi, H., and Vaziri, A., Elasto-plastic stresses in a functionally graded rotating disk, ASME J. Eng. Mater. Technol., 2012, vol. 134, no. 2, p. 021004.

    Article  Google Scholar 

  5. Li, D.F., Li, C.F., Shu, S.Q., Wang, Z.X., and Lu, J., A fast and accurate analysis of the interacting cracks in linear elastic solids, Int. J. Fract., 2008, vol. 151, p. 169.

    Article  Google Scholar 

  6. Azikov, N.S. and Gaidarzhi, Yu.V., Load-carrying capacity of skew composite panels, Konstrukts. Kompoz. Mater., 2015, no. 1 (137), p. 3.

  7. Birger, I.A., Ostatochnye napryazheniya (Residual Stress), 2nd ed., Moscow: LENAND, 2015.

  8. Albagachiev, A.Yu. and Preobrazhenskaya, E.V., Research of residual stresses during joint finishing and hardening processing of machine parts, in Materialy nauchno-tekhnicheskoi konferentsii MGAPI Novye materialy i tekhnologii (Proceedings of the Conference of SAIECS on New Materials and Technologies), Moscow, 2001, p. 19.

  9. Yakovleva, A.P., Analysis of the properties of steel parts surface layer strengthened by electromechanical processing, Aviats. Prom-st', 2012, no. 2, p. 8.

  10. Yakovleva, A.P., Increasing the life of friction pairs of metal cutting equipment, in Mashinostroenie: innovatsionnye aspekty razvitiya, Materialy I mezhdunarodnoi nauchno-prakticheskoi konferentsii (Proceedings of the 1st International Conference on Engineering: Innovative Aspects of Development), 2018, p. 102.

  11. Yakovleva, A.P., Efficacy of integration on lathes CNC, Sprav. Inzhen. Zh., 2018, no. 11, p. 36. https://doi.org/10.14489/hb.2018.11.Đ.036

  12. Suslov, A.G., Part surface engineering - a reserve to increase the competitiveness of machines, Sprav. Inzhen. Zh., 2001, no. 4.

  13. Bez"yazychnyi, V.F., The effect of the quality of the surface layer after machining on the operational properties of machine parts, Sprav. Inzhen. Zh., 2001, no. 4, p. 9.

  14. Suslov, A.G., Technological support and improvement of operational properties of machine parts, technological equipment and tools, Sprav. Inzhen. Zh., 2000, no. 1, p. 6.

  15. Albagachiev, A.Yu. and Irevli, S.V., Effektivnye tekhnologicheskie metody obespecheniya kachestva detalei mashin (Effective Technological Methods for Ensuring the Quality of Machine Parts), Moscow: MGAPI, 2002.

  16. Albagachiev, A.Yu. and Irevli, S.V., Resource-saving method for processing machine parts, in Sbornik trudov mezhdunarodnoi nauchno-prakticheskoi konferentsii Proizvodstvo-tekhnologiya-ekologiya (Proceedings of the International Conference on Production Technology Ecology), Moscow: MGTU STANKIN, 2008, vol. 1, p. 15.

  17. Fadeev, P.L. and Albagachiev, A.Yu., Povyshenie nadezhnosti detalei mashin (Improving the Reliability of Machine Parts), Moscow: Mashinostroenie, 1993.

Download references

Author information

Authors and Affiliations

  1. Bauman Moscow State Technical University, 105005, Moscow, Russia

    A. P. Yakovleva

  2. Blagonravov Mechanical Engineering Research Institute, Russian Academy of Sciences, 101990, Moscow, Russia

    A. Yu. Albagachiev

Authors
  1. A. P. Yakovleva
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. Yu. Albagachiev
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. P. Yakovleva.

Ethics declarations

The authors declare they have no conflict of interest.

Additional information

Translated by N. Semenova

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yakovleva, A.P., Albagachiev, A.Y. Theoretical Investigation of the Influence of Combined Machining Modes on the Value and Character of Residual Stresses in the Surface Layer of Cylindrical Friction Pairs. J. Mach. Manuf. Reliab. 49, 237–242 (2020). https://doi.org/10.3103/S1052618820020144

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1052618820020144

Keywords:

Search

Navigation