Skip to main content

Advertisement

Log in

Machine monitoring system: a decade in review

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

In recent years, significant advancements have been achieved in the domain of machine monitoring as witnessed from the beginning of the new industrial revolution (IR) known as IR 4.0. This new revolution is characterized by complete automation, and an increase in the technological deployments and advanced devices used by various systems. As a result, considerable advancement has been reported by researchers and academia around the world by adopting and adapting the new technology related to the machine condition monitoring problem. For these reasons, it is important to highlight new findings and approaches in machine condition monitoring based on the wireless sensor solution and machine learning signal processing methodology that are relevant to assist in advancing this new revolution. This article presents a comprehensive review on tool condition monitoring (TCM), tool wear, and chatter based on vibration, cutting force, temperature, surface image, and smart label monitoring parameters from signal acquisition, signal processing methodology, and decision-making, particularly for the milling process. The paper also provides a brief introduction to the manufacturing industries and computer numerical control (CNC) machine tool demand and a review of machine monitoring and countries involvement in machine monitoring, as well as the approaches and a survey of machine monitoring. The aim is to contribute to this rapidly growing field of machine condition monitoring research by exploring the latest research findings on the solution approach for milling machine process monitoring, to help expedite future research, and to give some future direction that needs to be considered as a path to produce a standardized CNC machine platform.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  1. Y. Yusof, A. Adam, M. Iliyas, and Y. Saif, “Review on Manufacturing for Advancement of Industrial,” vol. 2011, no. 2018, pp. 93–98, 2018.

  2. Yusof Y, Tan NZZ, Kassim N (2009) Exploring the ISO 14649 (STEP-NC) for Intelligent Manufacturing System. Eur J Sci Res 36(3):445–457

    Google Scholar 

  3. Cha J-M, Suh S-H, Hascoet J-Y, Stroud I (2016) A roadmap for implementing new manufacturing technology based on STEP-NC. J Intell Manuf

  4. Rehorn AG, Jiang J, Orban PE (2005) State-of-the-art methods and results in tool condition monitoring: a review. Int J Adv Manuf Technol. 26(7–8):693–710

    Google Scholar 

  5. Ridwan F, Xu X, Liu G (2012) A framework for machining optimisation based on STEP-NC. J Intell Manuf 23(3):423–441

    Google Scholar 

  6. Rizal M, Ghani JA, Nuawi MZ, Haron CHC (2018) An embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling. Int J Adv Manuf Technol. 95(1–4):811–823

    Google Scholar 

  7. Yeo SH, Khoo LP, Neo SS (2000) Tool condition monitoring using reflectance of chip surface and neural network. J Intell Manuf 11(6):507–514

    Google Scholar 

  8. Kurada S, Bradley C (1997) A review of machine vision sensors for tool condition monitoring. Comput Ind

  9. Elias DM, Yusof Y, Minhat M (2013) CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation, pp 27–31

    Google Scholar 

  10. Latif K, Yusof Y, Nassehi A, Latif QBAI (2017) Development of a feature-based open soft-CNC system. Int J Adv Manuf Technol. 89(1–4):1013–1024

    Google Scholar 

  11. Zaretalab A, Haghighi HS, Mansour S, Sajadieh MS (2018) A mathematical model for the joint optimization of machining conditions and tool replacement policy with stochastic tool life in the milling process. Int J Adv Manuf Technol 96(5–8):2319–2339

    Google Scholar 

  12. Yang K, Wang G, Dong Y, Zhang Q, Sang L (2019) Early chatter identification based on an optimized variational mode decomposition. Mech Syst Signal Process 115:238–254

    Google Scholar 

  13. Zhao YF, Xu X (2010) Advanced engineering informatics enabling cognitive manufacturing through automated on-machine measurement planning and feedback. Adv Eng Informatics 24(3):269–284

    Google Scholar 

  14. Yusof Y, Latif K (2014) Survey on computer-aided process planning. Int J Adv Manuf Technol. 75(1–4):77–89

    Google Scholar 

  15. Latif K, Kadir AZA, Yusof Y (2019) The importance of STEP-NC in the IR 4.0 manufacturing systems. 8(4):1568–1570

  16. Xu X (2017) Machine Tool 4.0 for the new era of manufacturing. Int J Adv Manuf Technol 92(5–8):1893–1900

    Google Scholar 

  17. Luo M, Chong Z, Liu D (2018) Cutting Forces measurement for milling process by Using working tables with integrated PVDF thin-film sensors. Sensors (Basel) 18(11)

  18. Rizal M, Rizal M, Ghani JA, Nuawi MZ, Che Haron CH (2014) A wireless system and embedded sensors on spindle rotating tool for condition monitoring. Adv Sci Lett 20(10–12):1829–1832

    Google Scholar 

  19. Zhong RY, Wang L, Xu X (2017) An IoT-enabled real-time machine status monitoring approach for cloud manufacturing. Procedia CIRP 63:709–714

    Google Scholar 

  20. Zedong Z, Azman MA (2017) Towards Industry 4.0: sensorizing CNC machine. Singapore Polytechnic

  21. Hillman JB (1969) Graphic time-sharing with real-time data bases. In: Proceeding ACM ’69 Proceedings of the 1969 24th national conferenceg, pp 443–457

    Google Scholar 

  22. Holub M, Bradac F, Pokorny Z, Jelinek A (2018, 2018) Application of a ballbar fordiagnostics of cnc machine tools. MM Sci J (December):2601–2605

  23. I. O, Olalere MD (2018) Early fault detection of elevators using remote condition monitoring through IoT technology. South African J Ind Eng 29(December):17–32

    Google Scholar 

  24. Zhou Y, Xue W (2018) A multisensor fusion method for tool condition monitoring in milling. Sensors 18(11):3866

    Google Scholar 

  25. Sevilla-Camacho PY, Robles-Ocampo JB, Muñiz-Soria J, Lee-Orantes F (2015) Tool failure detection method for high-speed milling using vibration signal and reconfigurable bandpass digital filtering. Int J Adv Manuf Technol. 81(5–8):1187–1194

    Google Scholar 

  26. Rabah B, Benkedjouh T, Said R (2019) Tool wear condition monitoring based on blind source separation and wavelet transform. Lect Notes Electr Eng. 522:377–389

    Google Scholar 

  27. Dai Y, Zhu K (2018) A machine vision system for micro-milling tool condition monitoring. Precis. Eng. 52:183–191

    Google Scholar 

  28. Krishnakumar P, Rameshkumar K, Ramachandran KI (2018) Machine learning based tool condition classification using acoustic emission and vibration data in high speed milling process using wavelet features, vol 1, pp 1–18

    Google Scholar 

  29. Huang YX, Liu X, Liu CL, Li YM (2018) Intrinsic feature extraction using discriminant diffusion mapping analysis for automated tool wear evaluation. Front Inf Technol Electron Eng 19(11):1352–1361

    Google Scholar 

  30. Li W (2013) Study on feature selection and identification. Int J Smart Sens Intell Syst 6(2):448–465

    Google Scholar 

  31. Lauro CH, Brandão LC, Baldo D, Reis RA, Davim JP (2014) Monitoring and processing signal applied in machining processes - a review. Meas J Int Meas Confed. 58(December):73–86

    Google Scholar 

  32. Quintana G, Ciurana J (2011) Chatter in machining processes: a review. Int J Mach Tools Manuf 51(5):363–376

    Google Scholar 

  33. Wang G, Yang Y, Xie Q, Zhang Y (2014) Force based tool wear monitoring system for milling process based on relevance vector machine. Adv Eng Softw 71:46–51

    Google Scholar 

  34. Wang J, Xie J, Zhao R, Zhang L, Duan L (2017) Multisensory fusion based virtual tool wear sensing for ubiquitous manufacturing. Robot Comput Integr Manuf 45:47–58

    Google Scholar 

  35. Hong YS, Yoon HS, Moon JS, Cho YM, Ahn SH (2016) Tool-wear monitoring during micro-end milling using wavelet packet transform and Fisher’s linear discriminant. Int. J. Precis. Eng. Manuf. 17(7):845–855

    Google Scholar 

  36. Oliaei SNB, Karpat Y (2016) Influence of tool wear on machining forces and tool deflections during micro milling. Int J Adv Manuf Technol. 84(9–12):1963–1980

    Google Scholar 

  37. Jennings C, Terpenny J, Gao RX (2017) Cloud-based parallel machine learning for tool wear prediction. J Manuf Sci Eng (c)

  38. W. Yang, Q. Zhou, and K. Tsui, “Differential evolution-based feature selection and parameter optimisation for extreme learning machine in tool wear estimation,” vol. 7543, no. December, 2015.

  39. Wang M, Wang J (2012) CHMM for tool condition monitoring and remaining useful life prediction. Int J Adv Manuf Technol. 59(5–8):463–471

    Google Scholar 

  40. Kaya B, Oysu C, Ertunc HM (2011) Force-torque based on-line tool wear estimation system for CNC milling of Inconel 718 using neural networks. Adv Eng Softw 42(3):76–84

    Google Scholar 

  41. Javed K, Gouriveau R, Li X, Zerhouni N (2016) Tool wear monitoring and prognostics challenges : a comparison of connectionist methods toward an adaptive ensemble model. J Intell Manuf.

  42. Torabi Jahromi A, Er MJ, Li X, Lim BS (2016) Sequential fuzzy clustering based dynamic fuzzy neural network for fault diagnosis and prognosis. Neurocomputing 196:31–41

    Google Scholar 

  43. Yan HC, Zhou JH, Pang CK (2015) Gamma process with recursive MLE for wear PDF prediction in precognitive maintenance under aperiodic monitoring. Mechatronics

  44. Geramifard O, Xu J-X, Zhou J-H, Li X (2014) Multimodal hidden Markov model-based approach for tool wear monitoring. IEEE Trans Ind Electron 61(6):2900–2911

    Google Scholar 

  45. Zhu K, Vogel-Heuser B (2014) Sparse representation and its applications in micro-milling condition monitoring: noise separation and tool condition monitoring. Int J Adv Manuf Technol 70(1–4):185–199

    Google Scholar 

  46. Wang G, Yang Y, Li Z (2014) Force sensor based tool condition monitoring using a heterogeneous ensemble learning model. Sensors (Switzerland) 14(11):21588–21602

    Google Scholar 

  47. Abbas J, Al-Habaibeh A, Su DZ (2013) Investigating the design of condition monitoring systems to evaluate surface roughness under the variability in tool wear and fixturing conditions. Key Eng Mater 572:467–470

    Google Scholar 

  48. Bagci E (2011) Monitoring and analysis of MRR-based feedrate optimization approach and effects of cutting conditions using acoustic sound pressure level in free-form surface milling. Sci Res Essays 6(2):256–277

    Google Scholar 

  49. Cus F, Zuperl U (2011) Real-time cutting tool condition monitoring in milling. Stroj Vestnik/Journal Mech Eng 57(2):142–150

    Google Scholar 

  50. Girardin F, Rémond D, Rigal JF (2010) A new method for detecting tool wear and breakage in milling. Int J Mater Form. 3(SUPPL. 1):463–466

    Google Scholar 

  51. Cho S, Binsaeid S, Asfour S (2010) Design of multisensor fusion-based tool condition monitoring system in end milling. Int J Adv Manuf Technol. 46(5–8):681–694

    Google Scholar 

  52. Jauregui JC, Resendiz JR, Thenozhi S, Szalay T, Jacso A, Takacs M (2018) Frequency and time-frequency analysis of cutting force and vibration signals for tool condition monitoring. IEEE Access 6(c):6400–6410

    Google Scholar 

  53. Madhusudana CK, Budati S, Gangadhar N, Kumar H, Narendranath S (2016) Fault diagnosis studies of face milling cutter using machine learning approach. J Low Freq Noise Vib Act Control 35:128–138

    Google Scholar 

  54. Madhusudana CK, Kumar H, Narendranath S (2016) Condition monitoring of face milling tool using K-star algorithm and histogram features of vibration signal. Eng Sci Technol An Int J 19(3):1543–1551

    Google Scholar 

  55. Bisu CF, Zapciu M, Cahuc O, Gérard A, Anica M (2012) Envelope dynamic analysis: A new approach for milling process monitoring. Int J Adv Manuf Technol. 62(5–8):471–486

    Google Scholar 

  56. M. M. S. D. B. Srinivasa Prasad*, a (2011) Analysis of face milling operation using acousto optic emission. Jordan J Mech Ind Eng. 5(6):509–519

    Google Scholar 

  57. Friedrich B, Schorghofer P, Habersohn C (2018) In-Process Control with A Sensory Tool Holder to Avoid chatterc. J Mach Eng. 18(3):16–27

    Google Scholar 

  58. Harris K, Triantafyllopoulos K, Stillman E, McLeay T (2016) A multivariate control Chart for autocorrelated tool wear processes. Qual. Reliab. Eng. Int. 32(6):2093–2106

    Google Scholar 

  59. Zhang C, Yao X, Zhang J, Jin H (2016) Tool condition monitoring and remaining useful life prognostic based on awireless sensor in dry milling operations. Sensors (Switzerland) 16(6)

  60. Sevilla-Camacho PY, Robles-Ocampo JB, Jauregui-Correa JC, Jimenez-Villalobos D (2015) FPGA-based reconfigurable system for tool condition monitoring in high-speed machining process. Meas J Int Meas Confed.

  61. Li H, Jing X, Wang J (2014) Detection and analysis of chatter occurrence in micro-milling process. Proc Inst Mech Eng Part B J Eng Manuf. 228(11):1359–1371

    Google Scholar 

  62. Liu H, Lian L, Li B, Mao X, Yuan S, Peng F (2014) An approach based on singular spectrum analysis and the Mahalanobis distance for tool breakage detection. Proc Inst Mech Eng Part C J Mech Eng Sci 228(18):3505–3516

    Google Scholar 

  63. Wang GF, Yang YW, Zhang YC, Xie QL (2014) Vibration sensor based tool condition monitoring using ν support vector machine and locality preserving projection. Sensors Actuators, A Phys 209:24–32

    Google Scholar 

  64. Hsieh WH, Lu MC, Chiou SJ (2012) Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling. Int J Adv Manuf Technol 61(1–4):53–61

    Google Scholar 

  65. Milner JL, Roth JT (2010) Condition monitoring for indexable carbide end mill using acceleration data. Mach Sci Technol. 14(1):63–80

    Google Scholar 

  66. Deng C, Guo R, Zheng P, Liu C, Xu X, Zhong RY (2018) From open CNC systems to cyber-physical machine tools: a case study, vol 72, pp 1270–1276

    Google Scholar 

  67. Aghazadeh F, Tahan A, Thomas M (2017) Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process. Int J Mech Eng Robot Res 6(6):30–34

    Google Scholar 

  68. Shao H, Shi X, Li L (2011) Power signal separation in milling process based on wavelet transform and independent component analysis. Int J Mach Tools Manuf. 51(9):701–710

    Google Scholar 

  69. Drouillet C, Karandikar J, Nath C, Journeaux AC, El Mansori M, Kurfess T (2016) Tool life predictions in milling using spindle power with the neural network technique. J Manuf Process. 22:161–168

    Google Scholar 

  70. Ammouri AH, Hamade RF (2014) Current rise criterion: a process-independent method for tool-condition monitoring and prognostics. Int J Adv Manuf Technol. 72(1–4):509–519

    Google Scholar 

  71. Ritou M, Garnier S, Furet B, Hascoet JY (2014) Angular approach combined to mechanical model for tool breakage detection by eddy current sensors. Mech Syst Signal Process. 44(1–2):211–220

    Google Scholar 

  72. Sevilla-Camacho PY, Herrera-Ruiz G, Robles-Ocampo JB, Jáuregui-Correa JC (2011) Tool breakage detection in CNC high-speed milling based in feed-motor current signals. Int J Adv Manuf Technol. 53(9–12):1141–1148

    Google Scholar 

  73. Aghazadeh F, Tahan A, Thomas M (2018) Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process. Int J Adv Manuf Technol.

  74. Sivasakthivel PS, Sudhakaran R (2013) Optimization of machining parameters on temperature rise in end milling of Al 6063 using response surface methodology and genetic algorithm. Int J Adv Manuf Technol. 67(9–12):2313–2323

    Google Scholar 

  75. Sun W, Chen B, Yao B, Cao X, Feng W (2017) Complex wavelet enhanced shape from shading transform for estimating surface roughness of milled mechanical components. J Mech Sci Technol. 31(2):823–833

    Google Scholar 

  76. Zhou JH, Pang CK, Zhong ZW, Lewis FL (2011) Tool wear monitoring using acoustic emissions by dominant-feature identification. IEEE Trans Instrum Meas 60(2):547–559

    Google Scholar 

  77. Dutta S, Pal SK, Sen R (2016) Progressive tool condition monitoring of end milling from machined surface images. J Eng Manuf.

  78. Roth JT, Djurdjanovic D, Yang X, Mears L, Kurfess T (2010) Quality and inspection of machining operations: tool condition monitoring. J Manuf Sci Eng 132(4):041015

    Google Scholar 

  79. Liukkonen M, Tsai TN (2016) Toward decentralized intelligence in manufacturing: recent trends in automatic identification of things. Int J Adv Manuf Technol. 87(9–12):2509–2531

    Google Scholar 

  80. Domdouzis K, Kumar B (2007) Radio-frequency identification ( RFID ) applications : a brief introduction, vol 21, pp 350–355

    Google Scholar 

  81. Bhattacharyya P, Sengupta D, Mukhopadhyay S (2007) Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques. Mech Syst Signal Process. 21(6):2665–2683

    Google Scholar 

  82. Zhu KP, Wong YS, Hong GS (2009) Wavelet analysis of sensor signals for tool condition monitoring: a review and some new results. Int J Mach Tools Manuf

  83. Zhang JM, Harman M, Ma L, Liu Y (2020) Machine learning testing: survey, landscapes and horizons. IEEE Trans Softw Eng.:1–1

  84. Siddhpura A, Paurobally R (2013) A review of flank wear prediction methods for tool condition monitoring in a turning process. Int J Adv Manuf Technol.

  85. Lei Y, Li N, Guo L, Li N, Yan T, Lin J (2018) Machinery health prognostics: a systematic review from data acquisition to RUL prediction. Mech Syst Signal Process. 104(December 2017):799–834

    Google Scholar 

  86. Boutaba R et al (2018) Comprehensive survey machine learning. J OfInternet Serv Appl 9(16):99

    Google Scholar 

  87. Gajate A, Haber R, Del Toro R, Vega P, Bustillo A (2012) Tool wear monitoring using neuro-fuzzy techniques: a comparative study in a turning process. J Intell Manuf. 23(3):869–882

    Google Scholar 

  88. Miao Q, Huang HZ, Fan X (2007) A comparison study of support vector machines and hidden markov models in machinery condition monitoring. J Mech Sci Technol.

  89. Bhat NN, Dutta S, Vashisth T, Pal S, Pal SK, Sen R (2016) Tool condition monitoring by SVM classification of machined surface images in turning. Int J Adv Manuf Technol. 83(9–12):1487–1502

    Google Scholar 

  90. Bishop CM, Tipping ME, Cb C (2000) Variational relevance vector machines. In: Uncertainty in artifical intelligence proceedings 2000, pp 46–53

    Google Scholar 

  91. Tipping ME (2001) Sparse Bayesian Learning and the relevance vector machine. J Mach Learn Res. 1(3):211–244

    MathSciNet  MATH  Google Scholar 

Download references

Funding

This paper was partly sponsored by the Technical and Vocational Education Technology Research Grant Scheme, Prototype Development Research Grant (Grant code: G011), Ministry of Higher Education, the Malaysian Government under the Ministry of Education Malaysia (MOE), Universiti Tun Hussein Onn Malaysia (UTHM), Universiti Teknikal Malaysia Melaka (UTEM), Universiti Teknologi Malaysia (UTM), and Jabatan Pendidikan Politeknik dan Kolej Komuniti (JPPKK).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Maznah Iliyas Ahmad.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Iliyas Ahmad, M., Yusof, Y., Daud, M.E. et al. Machine monitoring system: a decade in review. Int J Adv Manuf Technol 108, 3645–3659 (2020). https://doi.org/10.1007/s00170-020-05620-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-020-05620-3

Keywords

Navigation