Abstract
The Fe-rich intermetallic compounds in Al–17Si–2Fe were modified via Al–Mn–Ti quasicrystal master alloy. The effect of master alloy content on the Fe-rich phase morphology was studied by scanning electron microscope (SEM) and thermodynamic calculation. Results show that the microstructure of the Al–Mn–Ti master alloy consists of binary quasicrystal matrix and ternary AlMnTi secondary phase. The evolutive tendency of Fe-rich intermetallic compounds with content of quasi-crystal Al–Mn–Ti master alloy increasing can be described as follows: long needle-shaped β phase for Al–17Si–2Fe alloy, long plate-shaped ternary δ phase for 3 wt% master alloy addition, Chinese-script and polyhedral α phases for 4 wt% master alloy addition and finer plate-shaped quaternary δ phase with α phases for 5 wt% master alloy addition. The ultimate tensile strength of the Al–17Si–2Fe alloy with 4 wt% master alloy addition (a mass ratio of wMn/wFe ≈ 0.7) increases by 23.8% and the friction coefficient decreases from 0.45 to 0.35 compared with those of Mn-free alloy. α-Fe phases have less negative effect on the matrix compared with the long needle-shaped β phase and the plate-shaped δ phase.
Graphic abstract
Similar content being viewed by others
References
Jiao XY, Wang J, Liu CF, Guo ZP, Tong GD, Ma SL, Bi Y, Zhang YF, Xiong SM. Characterization of high-pressure die-cast hypereutectic Al–Si alloys based on microstructural distribution and fracture morphology. J Mater Sci Technol. 2019;35(6):1099.
Wang J, Guo Z, Song JL, Hu WH, Li JC, Xiong SM. On the growth mechanism of the primary silicon particle in a hypereutectic Al–20 wt%Si alloy using synchrotron X-ray tomography. Mater Des. 2018;137:176.
Wu YY, Liu XF, Jing BG, Huang CZ. Eutectic nucleation in Al–25wt%Si alloy through DSC. Rare Met. 2010;29(1):62.
Zhang ZK, Guo YC, Xia F, Li JP. Iron-rich phase in Al–Si alloy affected by Ce-Rich rare earths and ultrasonic field. Chin J Rare Met. 2019;43(2):219.
Chanyathunyaroj K, Patakham U, Kou S, Limmaneevichitr C. Mechanical properties of squeeze-cast Al–7Si–0.3Mg alloys with Sc-modified Fe-rich intermetallic compounds. Rare Met. 2018;37(9):769.
Wu YN, Liao HC. Corrosion behavior of extruded near eutectic Al–Si–Mg and 6063 alloys. J Mater Sci Technol. 2013;29(4):380.
Srivastava AK, Srivastava VC, Gloter A, Ojha SN. Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy. Acta Mater. 2006;54(7):1741.
Lin C, Wu SS, Zhong G, Wan L, An P. Effect of ultrasonic vibration on Fe-containing intermetallic compounds of hypereutectic Al–Si alloys with high Fe content. Trans Nonferrous Met Soc China. 2013;23(5):1245.
Tzeng YC, Wu CT, Bor HY, Horng JL, Tsai ML, Lee SL. Effects of scandium addition on iron-bearing phases and tensile properties of Al–7Si–6Mg alloys. Mater Sci Eng A. 2014;593:103.
Patakham U, Limmaneevichitr C. Effects of iron on intermetallic compound formation in scandium modified Al–Si–Mg alloys. J Alloys Compd. 2014;616:198.
Sreeja SS, Pillai KM, Rajan TPD, Pai BC. Effects of individual and combined additions of Be, Mn, Ca and Sr on the solidification behavior, structure and mechanical properties of Al–7Si–0.3Mg–0.8Fe alloy. Mater Sci Eng A. 2007;460–461:561.
Gao T, Hu KQ, Wang LS, Zhang BR, Liu XF. Morphological evolution and strengthening behavior of α-Al(Fe, Mn)Si in Al–6Si–2Fe–xMn alloys. Res Phys. 2017;7:1051.
Gao T, Wu YY, Li C, Liu XF. Morphologies and growth mechanisms of α-Al(FeMn)Si in Al–Si–Fe–Mn alloy. Mater Lett. 2013;110:191.
Öz T, Karaköse E, Keskin M. Impact of beryllium additions on thermal and mechanical properties of conventionally solidified and melt-spun Al–4.5wt.%Mn–xwt.%Be (x = 0, 1, 3, 5) alloys. Mater Des. 2013;50:399.
Yamaguchi T, Fujima N. Atomic structure of Al–Mn quasicrystal. J Non-Cryst Solids. 1990;117–118:765.
Yang YJ. Preparation of Al–Mn–Ti quasi-crystal mater alloy and its application in Al–25% Si alloy. Taiyuan: Taiyuan University of Technology; 2010. 56.
Bacaicoa I, Wicke M, Luetje M, Zeismann F, Brueckner-Foit A, Geisert A, Fehlbier M. Characterization of casting defects in a Fe-rich Al–Si–Cu alloy by microtomography and finite element analysis. Eng Fract Mech. 2017;183:159.
Bacaicoa I, Luetje M, Wicke M, Geisert A, Zeismann F, Brueckner-Foit A. 3D morphology of Al5FeSi inclusions in high Fe-content Al–Si–Cu alloys. Procedia. 2016;2:2269.
Rømming C, Hansen V, Gjonnes J. Crystal structure of β-Al4.5FeSi. Acta Cryst B. 1994;50:307.
Timpel M, Wanderka N, Grothausmann R, Banhart J. Distribution of Fe-rich phases in eutectic grains of Sr-modified Al–10 wt%Si–0.1 wt% Fe casting alloy. J Alloys Compd. 2013;558:18.
Kral MV. A crystallographic identification of intermetallic phases in Al–Si alloys. Mater Lett. 2005;59(18):2271.
Murray J, McAlister AJ. The Al–Si (aluminum–silicon) system. Bull Alloy Phase Diagr. 1984;5(1):74.
Dahle AK, Nogita K, McDonald SD, Dinnis C, Lu L. Eutectic modification and microstructure development in Al–Si Alloys. Mater Sci Eng A. 2005;413–414:243.
Timpel M, Wanderka N, Murty BS, Banhart J. Three-dimensional visualization of the microstructure development of Sr-modified Al–15Si casting alloy using FIB-EsB tomography. Acta Mater. 2010;58(20):6600.
Day MG, Hellawell A. The microstructure and crystallography of aluminium–silicon eutectic alloys. Proc R Soc A. 1968;305:473.
Lin C, Wu SS, Lü SL, Wu HB, Chen HX. Influence of high pressure and manganese addition on Fe-rich phases and mechanical properties of hypereutectic Al–Si alloy with rheo-squeeze casting. Trans Nonferrous Met Soc China. 2019;29(2):253.
Narayanan LA, Samuel FH, Gruzleski JE. Crystallization behavior of iron-containing intermetallic compounds in 319 aluminum alloy. Metall Mater Trans A. 1994;25:1761.
Kim HY, Park TY, Han SW, Lee HM. Effects of Mn on the crystal structure of α-Al(Mn, Fe)Si particles in A356 alloys. J Cryst Growth. 2006;291(1):207.
Becker H, Bergh T, Vullum PE, Leineweber A, Li Y. Effect of Mn and cooling rates on α-, β- and δ-Al–Fe–Si intermetallic phase formation in a secondary Al–Si alloy. Materialia. 2019;5:100198.
Bidmeshki C, Abouei V, Saghafifian H, Shabestari SG, Noghani MT. Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al–17.5%Si alloys. J Mater Res Technol. 2016;5(3):250.
Samuel AM, Samuel FH, Doty HW. Observations on the formation of β-Al5FeSi phase in 319 type Al–Si alloys. J Mater Sci. 1996;31:5529.
Hwang JY, Doty HW, Kaufman MJ. The effects of Mn additions on the microstructure and mechanical properties of Al–Si–Cu casting alloys. Mater Sci Eng A. 2008;488(1–2):496.
Seifeddine S, Johansson S, Svensson IL. The influence of cooling rate and manganese content on the β-Al5FeSi phase formation and mechanical properties of Al–Si based alloys. Mater Sci Eng A. 2008;490(1–2):385.
Taylor JA, Schaffer GB, Stjohn DH. The role of iron in porosity formation in Al–Si–Cu based casting alloys—Part II: phase diagram approach. Metall Mater Trans A. 1999;30:1651.
Mascre C. Influence of iron and manganese on type A-S13 (Alpax) alloys. Fonderie. 1955;108:4330.
Wolf W, Sitta BO, Martini LM, Jorge AM Jr, Bolfarini C, Kiminami CS, Botta WJ. Effect of Cr addition on the formation of the decagonal quasicrystalline phase of a rapidly solidified Al–Ni–Co alloy. J Alloys Compd. 2017;707:41.
Li RT, Murugan VK, Dong ZL, Khor KA. Comparative study on the corrosion resistance of Al–Cr–Fe alloy containing quasicrystals and pure Al. J Mater Sci Technol. 2016;32(10):1054.
Acknowledgements
This study was financially supported by the National Natural Science Foundation of China (No. 51201071); the National Natural Science Foundation of Jiangsu Provence (BK20161270); Jiangsu Overseas Visiting Scholar Program for University Prominent Young & Middle-aged Teachers and Presidents (2018).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, J., Pang, ZY., Wang, L. et al. Microstructure and properties evolution of Al–17Si–2Fe alloys with addition of quasicrystal Al–Mn–Ti master alloy. Rare Met. 39, 1210–1221 (2020). https://doi.org/10.1007/s12598-020-01449-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-020-01449-7