Abstract
Deep reactive ion etching (DRIE) technology is one of the most important technologies in the processing of microelectronic devices and microelectromechanical system. As a necessary process in semiconductor integration, it has been widely studied in the past decades. It is known that the traditional DRIE process typically uses a plasma etching reactor equipped with inductively coupled plasma (ICP) sources to generate a high-density plasma so as to achieve high aspect ratio trenches with relatively small roughness. A cryogenic temperature control unit is typically employed as well. Here, however, we use a parallel plate RIE with rather simple structure, which is not usually used for DRIE, to obtain high aspect ratio silicon etching. With no ICP sources and no sophisticated temperature control unit, the system and experiment are now much more cost effective. Through the optimization of the processing, the etching rate of silicon can reach 440 nm/min. Finally, a 45 μm deep trench is etched in silicon with good perpendicularity. This method will greatly reduce the equipment related cost, especially for those applications that do not have extremely stringent requirement on the final etching accuracy.
Similar content being viewed by others
References
J.P. Booth, G. Cunge, P. Chabert et al., J. Appl. Phys. 85, 3097–3107 (1999). https://doi.org/10.1063/1.369649
F. Marty, L. Rousseau, B. Saadany et al., Microelectron. J. 36, 673–677 (2005). https://doi.org/10.1016/j.mejo.2005.04.039
F. Laermer, A. Urban, Microelectron. Eng. 67–68, 349–355 (2003). https://doi.org/10.1016/S0167-9317(03)00089-3
D.G. Choi, H.K. Yu, S.G. Jang et al., J. Am. Chem. Soc. 126, 7019–7025 (2004). https://doi.org/10.1021/ja0319083
C.M. Waits, B. Morgan, M. Kastantin et al., Sens. Actuators A Phys. 119, 245–253 (2005). https://doi.org/10.1016/j.sna.2004.03.024
J.W. Bartha, J. Greschner, M. Puech et al., Microelectron. Eng. 27, 453–456 (1995). https://doi.org/10.1016/0167-9317(94)00144-J
Ü. Sökmen, A. Stranz, S. Fündling et al., Microsyst Technol. 16, 863–870 (2010). https://doi.org/10.1007/s00542-010-1035-7
T. Sun, J. Miao, H. Zhu et al., Int. J. Comput. Eng. Sci. 04, 319–322 (2003). https://doi.org/10.1142/S1465876303001174
D. Humbird, D.B. Graves, Plasma Sour. Sci. Technol. 11, A191–A195 (2002). https://doi.org/10.1088/0963-0252/11/3A/328
H. Jansen, H. Gardeniers, M. Boer et al., J. Micromech. Microeng. 6, 14–28 (1996). https://doi.org/10.1088/0960-1317/6/1/002
F. Becker, I.W. Rangelow, R. Kassing, J. Appl. Phys. 80, 56–65 (1996). https://doi.org/10.1063/1.362761
F.H. Bell, O. Joubert, G.S. Oehrlein et al., J. Vac. Sci. Technol. A Vac. Surf Films 12, 3095–3101 (1994). https://doi.org/10.1116/1.578942
T. Otto, H. Wolf, R. Streiter et al., Microelectron. Eng. 45, 377–391 (1999). https://doi.org/10.1016/S0167-9317(98)00287-1
L. Sun, H. Jin, X. Ye et al., Optik. 127, 206–211 (2016). https://doi.org/10.1016/j.ijleo.2015.10.046
H.V. Jansen, J.G.E. Gardeniers, J. Elders et al., Sens. Actuators A Phys. 41, 136–140 (1994). https://doi.org/10.1016/0924-4247(94)80101-0
E. Gogolides, S. Grigoropoulos, A.G. Nassiopoulos, Microelectron. Eng. 27, 449–452 (1995). https://doi.org/10.1016/0167-9317(94)00143-I
R. D’Agostino, D.L. Flamm, J. Appl. Phys. 52, 162–167 (1981). https://doi.org/10.1063/1.328468
C.P. Demic, K.K. Chan, J. Blum, J. Vac. Sci. Technol. B 10, 1105–1110 (1992). https://doi.org/10.1116/1.586085
A.K. Paul, A.K. Dimri, R.P. Bajpai, Vacuum 68, 191–196 (2002). https://doi.org/10.1016/S0042-207X(02)00387-1
H. Jansen, M. Boer, R. Legtenberg et al., J. Micromech. Microeng. 5, 115–120 (1995). https://doi.org/10.1088/0960-1317/5/2/015
X. Wang, Y. Chen, L. Wang et al., Microelectron. Eng. 85, 1015–1017 (2008). https://doi.org/10.1016/j.mee.2008.01.073
M.K. Hooda, M. Wadhwa, S. Verma et al., Vacuum 84, 1142–1148 (2010). https://doi.org/10.1016/j.vacuum.2010.01.052
E.H. Klaassen, K. Petersen, J.M. Noworolski et al., Sens. Actuators A Phys. 52, 132–139 (1996). https://doi.org/10.1016/0924-4247(96)80138-5
P.T. Docker, P.K. Kinnell, M.C.L. Ward, J. Micromech. Microeng. 14, 941–944 (2004). https://doi.org/10.1088/0960-1317/14/7/014
J. Ohara, Y. Takeuchi, K. Sato, J. Micromech. Microeng. 19, 0950022 (2009). https://doi.org/10.1088/0960-1317/19/9/095022
K. Ishihara, Y. Chi-Fan, A.A. Ayon et al., J. Microelectromech. Syst. 8, 403–408 (1999). https://doi.org/10.1109/84.809054
W.-S. Kim, W. Lee, H.-W. Cheong et al., J. Korean Phys. Soc. 65, 1399–1403 (2014). https://doi.org/10.3938/jkps.65.1399
Acknowledgements
We thank National Natural Science Foundation of China (11674016) and National Key R&D Program of China (2018YFA0209004, 2017YFB0403102) for their financial supports.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Du, Z., Nie, J., Li, D. et al. Deep reactive ion etching of silicon using non-ICP-based equipment. Appl. Phys. A 126, 540 (2020). https://doi.org/10.1007/s00339-020-03732-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-020-03732-x